Makita HR4511C Bedienungsanleitung

Makita Bohrmaschine HR4511C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita HR4511C (12 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Rotary Hammer

HR4501C

HR4510C

HR4511C

008364

ENGLISH (Original instructions)

SPECIFICATIONS

Model HR4501C HR4510C HR4511C

Carbide-tipped bit 45 mm

Capacities Core bit 125 mm

No load speed (min

-1) 130 - 280

Blows per minute 1,250 - 2,750

Overall length 458 mm

Net weight 8.2 kg 8.9 kg 9.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE044-1

Intended use

The tool is intended for hammer drilling in brick,

concrete and stone as well as for chiselling work.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Model HR4501C, HR4511C

Sound pressure level (L

pA) : 94 dB(A)

Sound power level (L

WA) : 105 dB(A)

Uncertainty (K) : 3 dB(A)

Model HR4510C

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model HR4501C

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 16.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling

Vibration emission (ah,CHeq) : 12.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 12.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model HR4510C

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 9.5 m/s2

Uncertainty (K) : 2.0 m/s2

Work mode : chiselling

Vibration emission (ah,CHeq) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model HR4511C

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling

Vibration emission (ah,CHeq) : 7.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,CHeq) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Rotary Hammer

Model No./ Type: HR4501C, HR4510C, HR4511C

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	HR4511C
Breite:	458 mm
Tiefe:	36 mm
Höhe:	288 mm
Eingangsleistung:	1350 W
Energiequelle:	AC
Bohrdurchmesser in Beton (max.):	45 mm
Bohrdurchmesser in Holz (max.):	125 mm
Nenndrehzahl (max.):	280 RPM
Gewicht (mit Batterie):	8400 g
Schlagzahl:	2750 BPM
Aufprallenergie (max.):	9.4 J