Makita DHK180Z Bedienungsanleitung
Makita
Bohrmaschine
DHK180Z
Lesen Sie kostenlos die ๐ deutsche Bedienungsanleitung fรผr Makita DHK180Z (12 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war fรผr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
INSTRUCTION MANUAL
Cordless Power Scraper
DHK180
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DHK180
Blows per minute 0 - 3,200 min-1
Overall length 368 mm
Rated voltage D.C. 18 V
Net weight 3.3 - 3.6 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎may๎differ๎from๎country๎to๎country.
โข๎ The๎weight๎may๎differ๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
โข๎ Some๎of๎the๎battery๎cartridges๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎residence.
WARNING: Only use the battery cartridges listed above.๎Use๎of๎any๎other๎battery๎cartridges๎may๎cause๎
injury๎and/or๎๎ฟre.
Symbols
The๎followings๎show๎the๎symbols๎used๎for๎the๎equip-
ment.๎Be๎sure๎that๎you๎understand๎their๎meaning๎before๎
use.
Read instruction manual.
Ni-MH
Li-ion
Only๎for๎EU๎countries
Do๎not๎dispose๎of๎electric๎equipment๎or๎
battery๎pack๎together๎with๎household๎waste๎
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment๎and๎Batteries๎and๎Accumulators๎
and Waste Batteries and Accumulators
and their implementation in accordance
with๎national๎laws,๎electric๎equipment๎and๎
batteries๎and๎battery๎pack(s)๎that๎have๎
reached the end of their life must be col-
lected๎separately๎and๎returned๎to๎an๎envi-
ronmentally๎compatible๎recycling๎facility.
Intended use
The tool is intended for chiselling or scraping in con-
crete, brick, and stone.
Noise
The๎typical๎A-weighted๎noise๎level๎determined๎accord-
ing to EN60745-2-6:
Sound๎pressure๎level๎(L
pA)๎:๎83๎dB(A)
Sound๎power๎level๎(L
WA)๎:๎94๎dB๎(A)
Uncertainty๎(K)๎:๎3๎dB(A)
NOTE:๎The๎declared๎noise๎emission๎value(s)๎has๎
been measured in accordance with a standard test
method๎and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎
another.
NOTE:๎The๎declared๎noise๎emission๎value(s)๎
may๎also๎be๎used๎in๎a๎preliminary๎assessment๎of๎
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The๎vibration๎total๎value๎(tri-axial๎vector๎sum)๎deter-
mined according to EN60745-2-6:
Work mode: chiselling
Vibration๎emission๎(a
h,๎Cheq):๎4.5๎m/s2
Uncertainty๎(K)๎:๎1.5๎m/s
2
NOTE:๎The๎declared๎vibration๎total๎value(s)๎has๎been๎
measured in accordance with a standard test method
and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎another.
NOTE:๎The๎declared๎vibration๎total๎value(s)๎may๎also๎
be๎used๎in๎a๎preliminary๎assessment๎of๎exposure.
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
3 ENGLISH
EC Declaration of Conformity
For European countries only
The๎EC๎declaration๎of๎conformity๎is๎included๎as๎Annex๎A๎
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided
with this power tool. Failure to follow all instructions
listed๎below๎may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎
serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless)๎power๎tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which๎may๎ignite๎the๎dust๎or๎fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎to๎lose๎control.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodi๎ฟed๎plugs๎
and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎shock๎if๎your๎body๎is๎earthed๎or๎grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
7. Power tools can produce electromagnetic
๎ฟelds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎tools๎may๎result๎in๎serious๎personal๎injury.
2. Use personal protective equipment. Always
wear eye protection.๎Protective๎equipment๎such๎
as๎a๎dust๎mask,๎non-skid๎safety๎shoes,๎hard๎hat๎or๎
hearing protection used for appropriate conditions
will๎reduce๎personal๎injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎Carrying๎power๎tools๎with๎
your๎๎ฟnger๎on๎the๎switch๎or๎energising๎power๎tools๎
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎A๎wrench๎or๎a๎key๎left๎
attached๎to๎a๎rotating๎part๎of๎the๎power๎tool๎may๎
result๎in๎personal๎injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.๎Loose๎clothes,๎jewellery๎or๎
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can๎cause๎severe๎injury๎within๎a๎fraction๎of๎a๎
second.
9.๎ Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Bohrmaschine |
| Modell: | DHK180Z |
| Breite: | 368 mm |
| Gewicht: | 3600 g |
| Leistung: | - W |
| Leerlaufdrehzahl: | 3200 RPM |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DHK180Z benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bohrmaschine Makita
28 Mai 2024
28 Mai 2024
25 Mai 2024
17 Mai 2024
13 Mai 2024
3 Mai 2024
2 Mai 2024
28 April 2024
25 April 2024
24 April 2024
Bedienungsanleitung Bohrmaschine
- Bohrmaschine Panasonic
- Bohrmaschine Cotech
- Bohrmaschine Bosch
- Bohrmaschine Flex
- Bohrmaschine Parkside
- Bohrmaschine Vonroc
- Bohrmaschine AEG
- Bohrmaschine Velleman
- Bohrmaschine IKEA
- Bohrmaschine Black And Decker
- Bohrmaschine Cocraft
- Bohrmaschine FERM
- Bohrmaschine Ryobi
- Bohrmaschine Skil
- Bohrmaschine Trotec
- Bohrmaschine Baier
- Bohrmaschine Carat
- Bohrmaschine Hilti
- Bohrmaschine Sparky
- Bohrmaschine DeWalt
- Bohrmaschine Einhell
- Bohrmaschine Elu
- Bohrmaschine Festool
- Bohrmaschine Worx
- Bohrmaschine Tacklife
- Bohrmaschine Hikoki
- Bohrmaschine Hitachi
- Bohrmaschine Hazet
- Bohrmaschine Kinzo
- Bohrmaschine Kress
- Bohrmaschine Metabo
- Bohrmaschine Stanley
- Bohrmaschine Gรผde
- Bohrmaschine Power Craft
- Bohrmaschine Workzone
- Bohrmaschine Meec Tools
- Bohrmaschine Dremel
- Bohrmaschine Fieldmann
- Bohrmaschine Proxxon
- Bohrmaschine Berner
- Bohrmaschine Westfalia
- Bohrmaschine Stihl
- Bohrmaschine Dedra
- Bohrmaschine DURO
- Bohrmaschine Graphite
- Bohrmaschine Pattfield
- Bohrmaschine Silverline
- Bohrmaschine Holzmann
- Bohrmaschine Sthor
- Bohrmaschine Herkules
- Bohrmaschine Robust
- Bohrmaschine Zipper
- Bohrmaschine Yato
- Bohrmaschine Baumr-AG
- Bohrmaschine Genesis
- Bohrmaschine Delta
- Bohrmaschine Batavia
- Bohrmaschine Bavaria
- Bohrmaschine Milwaukee
- Bohrmaschine Narex
- Bohrmaschine Toolcraft
- Bohrmaschine Fein
- Bohrmaschine Gardena
- Bohrmaschine Craftsman
- Bohrmaschine Defort
- Bohrmaschine Powerplus
- Bohrmaschine Alpha Tools
- Bohrmaschine Ozito
- Bohrmaschine Sun Joe
- Bohrmaschine Ridgid
- Bohrmaschine Porter-Cable
- Bohrmaschine Guede
- Bohrmaschine Felisatti
- Bohrmaschine Gamma
- Bohrmaschine Global
- Bohrmaschine Lux Tools
- Bohrmaschine Tanaka
- Bohrmaschine Wolfcraft
- Bohrmaschine Meister Craft
- Bohrmaschine Truper
- Bohrmaschine Kreg
- Bohrmaschine Einhell Bavaria
- Bohrmaschine Prowork
- Bohrmaschine Bullcraft
- Bohrmaschine Tryton
- Bohrmaschine Ergotools Pattfield
- Bohrmaschine THUN
- Bohrmaschine Bavaria By Einhell
Neueste Bedienungsanleitung fรผr -Kategorien-
11 August 2024
9 August 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
24 Juni 2024