Makita 8391DWAE Bedienungsanleitung

Makita Bohrmaschine 8391DWAE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita 8391DWAE (13 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/13

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Hammer Driver Drill

8271D

8281D

8381D

8391D

008693

ENGLISH (Original instructions)

SPECIFICATIONS

Model 8271D 8281D 8381D 8391D

Steel 10 mm 10 mm 13 mm 13 mm

Wood 25 mm 25 mm 25 mm 36 mm

Concrete 8 mm 10 mm 10 mm 13 mm

Wood screw 5.1 mm x 63 mm

6 mm x 75 mm

Capacities

Machine screw 6 mm

High 0 - 1,300

No load speed (min-1) Low 0 - 400

High 0 - 19,500

Blows per minute Low 0 - 6,000

Overall length 210 mm 210 mm 218 mm 234 mm

Net weight 1.6 kg 1.7 kg 1.7 kg 2.1 kg

Rated voltage D.C. 12 V D.C. 14.4 V D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-3

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and electronic

equipment and its implementation in

accordance with national law, electric

equipment that have reached the end of their

life must be collected separately and

returned to an environmentally compatible

recycling facility.

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

For Model 8271D

ENG104-1

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (LpA) : 79 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG203-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745-2-1:

Work mode: impact drilling into concrete

Vibration emission (ah,ID) : 10.5 m/s2

Uncertainty (K) : 2 m/s

ENG302-2

Work mode : drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

For Model 8281D,8381D

ENG104-1

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA ) : 79 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG203-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745-2-1:

Work mode: impact drilling into concrete

Vibration emission (ah,ID) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG302-2

Work mode : drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

For Model 8391D

ENG104-1

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 78 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG203-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745-2-1:

Work mode: impact drilling into concrete

Vibration emission (ah,ID) : 8 m/s2

Uncertainty (K) : 1.5 m/s2

ENG302-2

Work mode : drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Hammer Driver Drill

Model No./ Type: 8271D/8281D/8381D/8391D

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.12.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	8391DWAE
Breite:	97 mm
Tiefe:	234 mm
Produktfarbe:	Black, Blue
Akku-/Batterietechnologie:	Nickel-Cadmium (NiCd)
Höhe:	252 mm
Energiequelle:	Akku
Bohrdruchmesser in Stahl (max.):	13 mm
Bohrdurchmesser in Holz (max.):	36 mm
Produktdesign:	Handbohrmaschine
Akku-/Batteriespannung:	18 V
Tragetasche:	Ja
Batteriekapazität:	1.9 Ah
Ladezeit:	60 min
Batterie enthalten:	Ja
Bohren:	Ja
Hammerbohren:	Ja
Spannzange Typ:	Ohne Schlüssel
Rücklauf:	Ja
Anzahl der Gänge:	2
Drehmomenteinstellungen:	16
Leerlaufgeschwindigkeit (1. Gang):	400 RPM
Leerlaufgeschwindigkeit (2. Gang):	1300 RPM
Maximum Drehkraft (schwere Anwendung):	42 Nm
Schrauben:	Ja
Anzahl enthaltener Akkus/Batterien:	2 Stück(e)
Spannbereich (max.):	13 mm
Maximum Drehkraft (leichte Verwendung):	27 Nm
Spannbereich (min.):	1.5 mm