Makita HR2630 Bedienungsanleitung

Makita Bohrmaschine HR2630

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita HR2630 (16 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Combination Hammer

HR2631F

HR2631FT

HR2641

HR2320T

HR2630

HR2630T

015335

ENGLISH (Original instructions)

SPECIFICATIONS

Model HR2631F

HR2631FT

HR2641 HR2320T HR2630 HR2630T

Concrete 26 mm 23 mm 26 mm

Core bit 68 mm

Diamond core bit (dry type)

80 mm 70 mm 80 mm

Steel 13 mm

Capacities

Wood 32 mm

No load speed 0 - 1,200 min

-1 0 - 1,100

min-1 0 - 1,200 min

-1

Blows per minute 0 - 4,600 min

-1 0 - 4,500

min-1 0 - 4,600 min

-1

Overall length 361 mm 385 mm 422 mm 380 mm 361 mm 385 mm

Net weight 2.9 kg 3.1 kg 2.9 kg 2.8 kg 3.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE042-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Model HR2631F, HR2631FT, HR2641

Sound pressure level (L

pA) : 90 dB (A)

Sound power level (L

WA) : 101 dB (A)

Uncertainty (K) : 3 dB (A)

Model HR2320T, HR2630, HR2630T

Sound pressure level (L

pA) : 91 dB (A)

Sound power level (L

WA) : 102 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model HR2631F

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 12.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,Cheq

) : 9.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

Model HR2631FT

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 11.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,Cheq) : 8.5 m/s

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model HR2641

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 11.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,Cheq) : 9.0 m/s

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model HR2320T

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 15.5 m/s

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,Cheq) : 10.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model HR2630

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 15.5 m/s

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,Cheq) : 9.5 m/s

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model HR2630T

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 15.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiselling function with side grip

Vibration emission (ah,Cheq) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-18

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Combination Hammer

Model No./ Type: HR2631F, HR2631FT, HR2641,

HR2320T, HR2630, HR2630T

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	HR2630
Breite:	361 mm
Gewicht:	2800 g
Produktfarbe:	Black,Blue
Eingangsleistung:	800 W
Energiequelle:	AC
Bohrdurchmesser in Beton (max.):	13 mm
Bohrdruchmesser in Stahl (max.):	13 mm
Bohrdurchmesser in Holz (max.):	32 mm
Nenndrehzahl (max.):	- RPM
Betriebsanleitung:	Ja
Ein-/Ausschalter:	Ja
Leerlaufdrehzahl (max.):	1200 RPM
Bohren:	Ja
Hammerbohren:	Ja
Meißeln:	Ja
Spannzange Typ:	SDS Plus
Schlagzahl:	4600 BPM
Aufprallenergie (max.):	2.4 J