Makita HP332D Bedienungsanleitung

Makita Bohrmaschine HP332D

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita HP332D (12 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

HP332D

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: HP332D

Drilling capacities 8 mmConcrete

Steel 10 mm

Wood 28 mm

Fastening capacities Wood screw 5.1 mm x 63 mm

Machine screw M6

No load speed High (2) 0 - 1,500 min-1

Low (1) 0 - 450 min-1

Blows per minute High (2) 0 - 22,500 min-1

Low (1) 0 - 6,750 min-1

Overall length 168 mm

Rated voltage D.C. 10.8 V - 12 V max

Battery cartridge BL1016, BL1021B BL1041B

Net weight 1.1 kg 1.3 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003

Symbols

Thefollowingshowthesymbolsusedfortheequip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentor

battery pack together with household waste

material!

InobservanceoftheEuropeanDirectives,

onWasteElectricandElectronic

EquipmentandBatteriesandAccumulators

andWasteBatteriesandAccumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

Thetoolisintendedforimpactdrillinginbrick,concrete

and stone. It is also suitable for screw driving and drill-

ing without impact in wood, metal, ceramic and plastic.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ingtoEN60745:

Sound pressure level (LpA):82dB(A)

Sound power level (LWA):93dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

minedaccordingtoEN60745:

Workmode:impactdrillingintoconcrete

Vibration emission (a

h,ID):12.5m/s2

Uncertainty(K):1.5m/s

Workmode:drillingintometal

Vibration emission (a

h,D):2.5m/s2 or less

Uncertainty(K):1.5m/s

NOTE:Thedeclaredvibrationemissionvaluehas

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE:Thedeclaredvibrationemissionvalue

may also be used in a preliminary assessment of

exposure.

WARNING:Thevibrationemissionduringactual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

MakitadeclaresthatthefollowingMachine(s):

DesignationofMachine:CordlessHammerDriverDrill

ModelNo./Type:HP332D

ConformstothefollowingEuropeanDirectives:

2006/42/EC

3 ENGLISH

Theyaremanufacturedinaccordancewiththefollowing

standardorstandardizeddocuments:EN60745

Thetechnicalleinaccordancewith2006/42/ECis

availablefrom:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

11.6.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust.Powertoolscreatesparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.Thereisanincreasedriskofelec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use.Useof

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.UseofanRCDreduces

the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication.Amomentofinattentionwhileoperating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrenchorakeyleft

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times.Thisenablesbettercontrol

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.Looseclothes,jewel-

lery or long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.Useof

dust collection can reduce dust-related hazards.

Power tool use and care

1. Do not force the power tool. Use the correct

power tool for your application.Thecorrect

powertoolwilldothejobbetterandsaferatthe

rate for which it was designed.

2. Do not use the power tool if the switch does

not turn it on and off.Anypowertoolthatcannot

be controlled with the switch is dangerous and

must be repaired.

3. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such pre

ventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool.Powertoolsaredangerousinthe

hands of untrained users.

5. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean.Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	HP332D
Breite:	66 mm
Tiefe:	168 mm
Gewicht:	1300 g
Produktfarbe:	Black, Blue
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	236 mm
Energiequelle:	Akku
Bohrdurchmesser in Beton (max.):	10 mm
Bohrdruchmesser in Stahl (max.):	10 mm
Bohrdurchmesser in Holz (max.):	28 mm
Eingebautes Licht:	Ja
Produktdesign:	Handbohrmaschine
Akku-/Batteriespannung:	10.8 V
Tragetasche:	Ja
Batteriekapazität:	4 Ah
Ladegerät enthalten:	Ja
Batterie enthalten:	Ja
Bohren:	Ja
Hammerbohren:	Ja
Schalldruckpegel:	82 dB
Schallpegelunsicherheit:	3 dB
Unsicherheit K:	1.5 m/s²
Anzahl der Gänge:	2
Weicher Haltegriff:	Ja
Drehmomenteinstellungen:	21
Leerlaufgeschwindigkeit (1. Gang):	450 RPM
Leerlaufgeschwindigkeit (2. Gang):	6750 RPM
Maximum Drehkraft (schwere Anwendung):	35 Nm
Schrauben:	Ja
Anzahl enthaltener Akkus/Batterien:	2 Stück(e)
Spannbereich (max.):	10 mm
Maximum Drehkraft (leichte Verwendung):	21 Nm
Spannbereich (min.):	1 mm
Wirkungsverhältnis (hohe Geschwindigkeit):	22500 BPM
Schwingungspegel (Metallbohrung):	2.5 m/s²
Schwingungspegel (Betonbohrung):	12.5 m/s²
Wirkungsverhältnis (geringe Geschwindigkeit):	1500 BPM