Makita HP1630 Bedienungsanleitung

Makita Bohrmaschine HP1630

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita HP1630 (36 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/36

GB Hammer Drill INSTRUCTION MANUAL

UA Ударний дриль ІНСТРУКЦІЯ ЕКСПЛУАТАЦІЇ З

PL Wiertarka udarowa INSTRUKCJA OBSŁUGI

RO Maşină de găurit MANUAL DE INSTRUCŢIUNI

DE Schlagbohrmaschine BEDIENUNGSANLEITUNG

HU Ütvefúró HASZNÁLATI KÉZIKÖNYV

SK Vŕtacie kladivo NÁVOD NA OBSLUHU

CZ Příklepová vrtačka NÁVOD K OBSLUZE

HP1630

HP1631

1 008893

2 008898

3 008894

4 008895

5 008896

6 008900

7 8 008897 008899

9 001302

ENGLISH (Original instructions)

Explanation of general view

1-1. Switch trigger

1-2. Lock button

2-1. Reversing switch lever

3-1. Action mode change lever

4-1. Side grip

5-1. Chuck key

6-1. Sleeve

6-2. Ring

7-1. Depth gauge

7-2. Side grip

7-3. Grip base

9-1. Blow-out bulb

SPECIFICATIONS

Model HP1630 HP1631

Concrete 16 mm 16 mm

Steel 13 mm 13 mm Capacities

Wood 30 mm 30 mm

No load speed (min

-1) 0 - 3,200 0 - 3,200

Blows per minute 0 - 48,000 0 - 48,000

Overall length 296 mm 295 mm

Net weight 2.1 kg 2.0 kg

Safety class /II /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 97 dB(A)

Sound power level (L

WA) : 108 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 17.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Hammer Drill

Model No./ Type: HP1630,HP1631

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	HP1630
Gewicht:	2100 g
Eingangsleistung:	710 W
Energiequelle:	AC
Bohrdurchmesser in Beton (max.):	16 mm
Bohrdruchmesser in Stahl (max.):	13 mm
Bohrdurchmesser in Holz (max.):	30 mm
Leerlaufdrehzahl (max.):	48000 RPM
Anpassbare Geschwindigkeit:	Ja
Hammerbohren:	Ja
Weicher Haltegriff:	Ja
Schraubendurchmesser (max.):	30 mm