Makita HM0870C Bedienungsanleitung

Makita Bohrmaschine HM0870C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita HM0870C (19 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/19

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

Demolition Hammer

HM0871C

HM0870C

010450

IMPORTANT: Read Before Using.

ENGLISH (Original instructions)

SPECIFICATIONS

Model HM0871C HM0870C

Blows per minute 1,100 - 2,650 min

-1

Overall length 466 mm 449 mm

Net weight 5.6 kg 5.1 kg

Safety class II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE045-1

Intended use

The tool is intended for chiselling work in concrete, brick,

stone and asphalt as well as for driving and compacting

with appropriate accessories.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model HM0871C

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 86 dB(A)

Sound power level (L

WA) : 97 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG216-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : chiseling function with side handle

Vibration emission (ah,CHeq) : 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG306-1

Work mode : chiseling function with side grip

Vibration emission (ah,CHeq) : 8.0 m/s2

Uncertainty (K) : 2.0 m/s2

For Model HM0870C

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 87 dB(A)

Sound power level (L

WA) : 98 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG216-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : chiseling function with side handle

Vibration emission (ah,CHeq) : 11.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG306-1

Work mode : chiseling function with side grip

Vibration emission (ah,CHeq) : 11.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-13

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Demolition Hammer

Model No./ Type: HM0871C, HM0870C

are of series production and

Conforms to the following European Directives:

98/37/EC until 28th December 2009 and then with

2006/42/EC from 29th December 2009

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

24th April 2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

10. Use of power supply via a RCD with a rated

residual current of 30mA or less is always

recommended.

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	HM0870C
Breite:	450.85 mm
Gewicht:	5035 g
Produktfarbe:	Black, Blue
Eingangsleistung:	1100 W
Tragetasche:	Ja
Bohren:	Nein
Hammerbohren:	Nein
Meißeln:	Ja
Spannzange Typ:	SDS Max
Schlagzahl:	2650 BPM
Schwingungspegel (Meißeln):	11 m/s²
Aufprallenergie (max.):	11.4 J
Gerätehalter:	- mm