Makita EX2650LH Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita EX2650LH (24 Seiten) in der Kategorie Multitool. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
EX2650LH
Multi Function Power Head
EX2650LH
WARNING:
Read this instruction manual carefully before putting the Multi Function Power Head into operation and
strictly observe the safety regulations!
Save instruction manual for future reference.
INSTRUCTION MANUAL
2
Thank you very much for purchasing the MAKITA Multi Function Power Head.
We are pleased to recommend to you the MAKITA Multi Function Power Head
which is the result of a long development programme and many years of
knowledge and experience.
Please read this booklet which refers in detail to the various points that will
demonstrate its outstanding performance. This will assist you to obtain the best
possible result from your MAKITA Multi Function Power Head.
You will note the following symbols when reading the instructions manual.
Read instruction manual and follow the
warnings and safety precautions!
Wear protective helmet, eye and ear
protection!
Take particular care and attention! Fuel (Gasoline)
Forbidden! Engine-manual start
No smoking! Emergency stop
No open ame! First aid
Protective gloves must be worn! ON/START
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended! OFF/STOP
Keep the area of operation clear of all
persons and pets!
English
(Original instructions)
Table of Contents Page
Symbols .........................................................................2
Safety instructions .........................................................3
Technical data................................................................6
Approved attachments...................................................7
Designation of parts.......................................................8
Mounting of handle ........................................................9
Mounting attachment .....................................................9
Disassembling .............................................................10
Before start of operation .............................................. 11
Correct handling of machine........................................13
Points in operation and how to stop ............................13
Servicing instructions...................................................16
Storage ........................................................................19
3
General instructions
To ensure correct operation, user has to read this instruction manual to make -
himself familiar with the handling of the Multi Function Power Head. Users
insufî‚¿ciently informed will risk danger to themselves as well as others due to
improper handling.
It is recommended only to lend the Multi Function Power Head to people who -
have proven to be experienced with Multi Function Power Heads.
Always hand over the instruction manual.
First users should ask the dealer for basic instructions to familiarize oneself -
with the handling of an engine powered cutter.
Children and young persons aged under 18 years must not be allowed to -
operate the Multi Function Power Head. Persons over the age of 16 years
may however use the device for the purpose of being trained only whilst
under supervision of a qualiî‚¿ed trainer.
Use Multi Function Power Heads with the utmost care and attention. -
Operate the Multi Function Power Head only if you are in good physical -
condition. Perform all work calmly and carefully. The user has to accept
liability for others.
Never use the Multi Function Power Head after consumption of alcohol or -
drugs, or if feeling tired or ill.
National regulation can restrict the use of the machine. -
Personal protective equipment
The clothing worn should be functional and appropriate, i.e. it should be tight- -
î‚¿tting but not cause hindrance. Do not wear either jewelry or clothing which
could become entangled with bushes or shrubs.
In order to avoid either head-, eye-, hand-or foot injuries as well as to protect -
your hearing the following protective equipment and protective clothing must
be used during operation of the Multi Function Power Head.
Always wear a helmet where there is a risk of falling objects. The protective -
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
The visor (2) of the helmet (or alternatively goggles) protects the face from -
ying debris and stones. During operation of the Multi Function Power Head
always wear goggles, or a visor to prevent eye injuries.
Wear adequate noise protection equipment to avoid hearing impairment (ear -
muffs (3), ear plugs etc.).
The work overalls (4) protect against ying stones and debris. -
We strongly recommend that the user wears work overalls.
Special gloves (5) made of thick leather are part of the prescribed equipment -
and must always be worn during operation of the Multi Function Power Head.
When using the Multi Function Power Head, always wear sturdy shoes (6) -
with a non-slip sole. This protects against injuries and ensures a good footing.
Starting up the Multi Function Power Head
Please make sure that there are no children or other people, also pay -
attention to any animals in the working vicinity.
Make sure that the attachment is attached in place, the control lever for easy -
action and check for proper functioning of the lock-off lever.
Motion of the attachment during idling speed is not allowed. Check with your -
dealer for adjustment if in doubt. Check for clean and dry handles and test
the function of the start/stop switch.
15 Meters
Diagrammatic î‚¿gure
Intended use of the machine
This multi function power head is intended for driving an approved attachment
listed in this instruction manual. Never use the machine for the other purpose.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Multitool |
| Modell: | EX2650LH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita EX2650LH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multitool Makita
9 Oktober 2024
29 September 2024
9 September 2024
3 September 2024
31 August 2024
30 August 2024
25 August 2024
16 August 2024
6 August 2024
5 August 2024
Bedienungsanleitung Multitool
- Multitool SKS
- Multitool Cotech
- Multitool Bosch
- Multitool Parkside
- Multitool Vonroc
- Multitool AEG
- Multitool Powerfix
- Multitool Black And Decker
- Multitool Cocraft
- Multitool FERM
- Multitool Ryobi
- Multitool Skil
- Multitool Topcraft
- Multitool Trotec
- Multitool Rocktrail
- Multitool Hilti
- Multitool DeWalt
- Multitool Einhell
- Multitool Worx
- Multitool Kress
- Multitool Metabo
- Multitool Güde
- Multitool Meec Tools
- Multitool Dremel
- Multitool Fieldmann
- Multitool Proxxon
- Multitool Westfalia
- Multitool Graphite
- Multitool Leatherman
- Multitool Silverline
- Multitool Stiga
- Multitool Milwaukee
- Multitool Fein
- Multitool Craftsman
- Multitool Powerplus
- Multitool Ozito
- Multitool Extech
- Multitool VARO
- Multitool Gamma
- Multitool Renovator
- Multitool G-Technology
- Multitool MTM
- Multitool CMT Orange Tools
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
14 Oktober 2024
8 Oktober 2024
4 Oktober 2024
21 September 2024
12 September 2024
11 September 2024
6 September 2024
5 September 2024
5 September 2024