Makita DUR191LRT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DUR191LRT (24 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
INSTRUCTION MANUAL
Cordless Grass Trimmer
DUR190U
DUR190L
DUR191U
DUR191L
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUR190U DUR190L DUR191U DUR191L
Type of handle Bike handle Loop handle Bike handle Loop handle
No load speed 3: 6,000 min-1
2: 5,100 min-1
1: 3,500 min-1
Overall length
(without cutting tool)
1,775 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
3-tooth blade
(P/N 191J34-5)
230 mm
4-tooth blade
(P/N 729025-2)
230 mm
Nylon cutting head
(P/N 126674-0)
300 mm
Plastic blade
(P/N 126642-3)
230 mm
Rated voltage D.C. 18 V
Net weight 3.1 - 3.4 kg 2.9 - 3.2 kg 3.4 - 3.7 kg 3.2 - 3.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended battery adapter
Battery adapter PDC01
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Noise
Model DUR190U
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
L
WA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
3 ENGLISH
Model DUR190L
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
Model DUR191U
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
Model DUR191L
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 77.0 3.9 91.6 2.4
ISO22868
(ISO11806-1)
Nylon cutting head 74.0 1.9 87.1 0.9
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 75.6 1.3 85.9 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).


Produktspezifikationen

Marke: Makita
Kategorie: Nicht kategorisiert
Modell: DUR191LRT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Makita DUR191LRT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Makita

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-