Makita DHR280ZJ Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DHR280ZJ (28 Seiten) in der Kategorie Hamer. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
INSTRUCTION MANUAL
Cordless Combination Hammer
DHR280
DHR281
DHR282
DHR283
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DHR280 DHR281 DHR282 DHR283
Capacities Concrete 28 mm
Core bit 54 mm
Diamond core bit (dry type) 65 mm
Steel 13 mm
Wood 32 mm
No load speed 0 - 980 min-1
Blows per minute 0 - 5,000 min-1
Overall length 373 mm 404 mm 373 mm 404 mm
Rated voltage D.C. 36 V
Net weight 3.9 - 5.1 kg
Optional accessory
Model: DX08 (For DHR280/DHR282) DX09 (For DHR281/DHR283)
Suction performance 350 l/min
Operating stroke Up to 190 mm
Suitable drill bit Up to 260 mm
Rated voltage D.C. 18 V
Net weight 1.6 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injuryand/orre.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or battery
pack together with household waste material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-6:
Model DHR280
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model DHR281
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DHR282
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model DHR283
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DHR280 with DX08
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
3 ENGLISH
Model DHR281 with DX09
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DHR282 with DX08
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DHR283 with DX09
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-6:
Model DHR280
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 9.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: hammer drilling into concrete with DX08
Vibration emission (a
h, HD): 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: chiselling function with side grip
Vibration emission (a
h, Cheq
): 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (a
h,D) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model DHR281
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 9.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: hammer drilling into concrete with DX09
Vibration emission (a
h, HD): 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: chiselling function with side grip
Vibration emission (a
h, Cheq
): 9.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (a
h,D) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model DHR282
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 9.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: hammer drilling into concrete with DX08
Vibration emission (a
h, HD): 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: chiselling function with side grip
Vibration emission (a
h, Cheq
): 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (a
h,D) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model DHR283
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 9.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: hammer drilling into concrete with DX09
Vibration emission (a
h, HD): 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: chiselling function with side grip
Vibration emission (a
h, Cheq): 8.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speciî‚¿cations provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Hamer |
| Modell: | DHR280ZJ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DHR280ZJ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hamer Makita
2 August 2024
31 Juli 2024
30 Juli 2024
26 Juli 2024
10 Juli 2024
4 Juli 2024
Bedienungsanleitung Hamer
- Hamer Bosch
- Hamer AEG
- Hamer Powerfix
- Hamer Black And Decker
- Hamer Cocraft
- Hamer FERM
- Hamer Ryobi
- Hamer Topcraft
- Hamer Trotec
- Hamer Hilti
- Hamer DeWalt
- Hamer Einhell
- Hamer Hikoki
- Hamer Hitachi
- Hamer Metabo
- Hamer Stanley
- Hamer Güde
- Hamer Scheppach
- Hamer Milwaukee
- Hamer CMI
- Hamer Craftsman
- Hamer Powerplus
- Hamer Porter-Cable
- Hamer Global
- Hamer Goon
- Hamer Einhell Bavaria
- Hamer McKenzie
- Hamer Anova
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
30 September 2024
29 September 2024
18 September 2024
16 September 2024
14 September 2024
13 September 2024
13 September 2024
10 September 2024
6 September 2024