Makita DHP487Z Bedienungsanleitung

Makita Bohrmaschine DHP487Z

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DHP487Z (12 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

DHP487

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DHP487

Drilling capacities 13 mmMasonry

Steel 13 mm

Wood Auger bit: 36 mm

Self-feed bit: 35 mm

Hole saw: 51 mm

Fastening capacities Wood screw 6 mm x 75 mm

Machine screw M6

No load speed High (2) 0 - 1,700 min-1

Low (1) 0 - 500 min-1

Blows per minute High (2) 0 - 25,500 min-1

Low (1) 0 - 7,500 min-1

Overall length 164 mm

Rated voltage D.C. 18 V

Net weight 1.4 - 1.7 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

andchargersmaycauseinjuryand/orre.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for impact drilling in brick, brickwork

and masonry. It is also suitable for screw driving and

drilling without impact in wood, metal, ceramic and

plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-1:

Sound pressure level (L

PA) : 83 dB(A)

Sound power level (L

WA) : 94 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-1:

Work mode: impact drilling into concrete

Vibration emission (a

h,ID) : 10.5 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

actual use of the power tool can dier from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	DHP487Z
Gewicht:	1400 g
Produktfarbe:	Black, Blue
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Energiequelle:	Akku
Bohrdurchmesser in Beton (max.):	13 mm
Bohrdruchmesser in Stahl (max.):	13 mm
Bohrdurchmesser in Holz (max.):	36 mm
Paketgewicht:	1700 g
Eingebautes Licht:	Ja
Produktdesign:	Handbohrmaschine
Akku-/Batteriespannung:	18 V
Leerlaufdrehzahl (max.):	1700 RPM
Anpassbare Geschwindigkeit:	Ja
Bohren:	Ja
Hammerbohren:	Ja
Spannzange Typ:	Ohne Schlüssel
Schallleistungspegel:	94 dB
Schalldruckpegel:	83 dB
Anzahl der Gänge:	2
Leerlaufgeschwindigkeit (1. Gang):	500 RPM
Schrauben:	Ja
Spannbereich (max.):	13 mm
Spannbereich (min.):	1.5 mm
Wirkungsverhältnis (hohe Geschwindigkeit):	25500 BPM
Schwingungspegel (Metallbohrung):	2.5 m/s²
Einstellbares Drehmoment:	Ja
Schwingungspegel (Betonbohrung):	10.5 m/s²
Wirkungsverhältnis (geringe Geschwindigkeit):	7500 BPM
Vorwärts-/Rückwärts-Indikator:	Ja