Makita BTP140RFE Bedienungsanleitung

Makita Bohrmaschine BTP140RFE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita BTP140RFE (16 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

I N S T R U C T I O N M A N U A L

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

ENGLISH

Cordless 4 Mode

Impact Driver

MODEL BTP130

MODEL BTP140

007155

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

END001-1

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

..................Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life

must be collected separately and

returned to an environmentally

compatible recycling facility.

Intended use

The tool is intended for impact screw driving in wood and

for impact drilling in brick, concrete and stone as well as

for drilling and screw driving without impact in wood,

metal, ceramic and plastic, .

For Model BTP130

For European countries only

Noise and Vibration

The typical A-weighted noise levels are

sound pressure level: 89 dB (A)

sound power level: 100 dB (A)

Uncertainty: 3 dB

– Wear ear protection. –

The typical weighted root mean square acceleration

value is 9 m/s2.

These values have been obtained according to EN60745.

For Model BTP140

For European countries only

Noise and Vibration

The typical A-weighted noise levels are

sound pressure level: 89 dB (A)

sound power level: 100 dB (A)

Uncertainty: 3 dB

– Wear ear protection. –

The typical weighted root mean square acceleration

value is 8 m/s2.

These values have been obtained according to EN60745.

Model BTP130 BTP140

Impact driver mode

Max. fastening torque 135 N•m 145 N•m

Capacities

Machine screw 4 mm - 8 mm

Standard bolt 5 mm - 14 mm

High tensile bolt 5 mm - 12 mm

No load speed (min-1)0 - 2,400 0 - 2,300

Impacts per minute 0 - 3,200

Hammer drill mode

No load speed (min-1)0 - 2,400 0 - 2,300

Blows per minute 0 - 28,800 0 - 27,600

Capacities Concrete 8 mm

Drill mode

No load speed (min-1)

High (2) 0 - 2,400 0 - 2,300

Low (1) 0 - 700

Capacities Steel 10 mm

Wood 21 mm

Screw driver mode No load speed (min-1)0 - 2,400 0 -2,300

Capacities Machine screw M4

Overall length 186 mm

Net weight 1.7 kg 1.8 kg

Rated voltage D.C.14.4 V D.C.18 V

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product

is in compliance with the following standards of stan-

dardized documents;

EN60745, EN55014 in accordance with Council Direc-

tives, 89/336/EEC, 98/37/EC.

Yasuhiko Kanzaki CE2005

Director

MAKITA INTERNATIONAL EUROPE LTD.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15

8JD, ENGLAND

Responsible manufacturer:

Makita Corporation Anjo Aichi Japan

GENERAL SAFETY RULES GEA002-3

WARNING:

Read all instructions. Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury. The term “power tool” in all of the

warnings listed below refers to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

Work area safety

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

Personal safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

10. Use safety equipment. Always wear eye protec-

tion. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal inju-

ries.

11. Avoid accidental starting. Ensure the switch is

in the off-position before plugging in. Carrying

power tools with your finger on the switch or plug-

ging in power tools that have the switch on invites

accidents.

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	BTP140RFE
Breite:	186 mm
Tiefe:	79 mm
Gewicht:	1800 g
Produktfarbe:	Black,Blue
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	246 mm
Energiequelle:	Akku
Bohrdurchmesser in Holz (max.):	21 mm
Vibrationsemission:	11.5 m/s²
Produktdesign:	Handbohrmaschine
Akku-/Batteriespannung:	18 V
Batteriekapazität:	3 Ah
Bohren:	Ja
Hammerbohren:	Ja
Spannzange Typ:	Ohne Schlüssel
Weicher Haltegriff:	Ja
Leerlaufgeschwindigkeit (1. Gang):	700 RPM
Leerlaufgeschwindigkeit (2. Gang):	2300 RPM
Maximum Drehkraft (schwere Anwendung):	140 Nm
Schrauben:	Ja