Makita BHR162Z Bedienungsanleitung

Makita Bohrmaschine BHR162Z

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita BHR162Z (16 Seiten) in der Kategorie Bohrmaschine. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

I N S T R U C T I O N M A N U A L

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

ENGLISH

Cordless Rotary

Hammer

MODEL BHR162

007369

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

END001-1

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

..................Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life

must be collected separately and

returned to an environmentally

compatible recycling facility.

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

For European countries only

Noise and Vibration

The typical A-weighted noise levels are

sound pressure level: 86 dB (A)

sound power level: 97 dB (A)

Uncertainty: 3 dB

– Wear ear protection. –

The typical weighted root mean square acceleration

value is 5.5 m/s2.

These values have been obtained according to EN60745.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product

is in compliance with the following standards of stan-

dardized documents;

EN60745, EN55014 in accordance with Council Direc-

tives, 89/336/EEC, 98/37/EC.

Yasuhiko Kanzaki CE2006

Director

MAKITA INTERNATIONAL EUROPE LTD.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15

8JD, ENGLAND

Responsible manufacturer:

Makita Corporation Anjo Aichi Japan

Model BHR162

Capacities

Concrete 16 mm

Steel 13 mm

Wood 24 mm

No load speed (min-1)0 - 1,500

Blows per minute 0 - 5,000

Overall length 296 mm

Net weight 2.1 kg

Rated voltage D.C. 14.4V

GENERAL SAFETY RULES GEA002-3

WARNING:

Read all instructions. Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury. The term “power tool” in all of the

warnings listed below refers to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

Work area safety

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

Personal safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

10. Use safety equipment. Always wear eye protec-

tion. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal inju-

ries.

11. Avoid accidental starting. Ensure the switch is

in the off-position before plugging in. Carrying

power tools with your finger on the switch or plug-

ging in power tools that have the switch on invites

accidents.

12. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

13. Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

15. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

these devices can reduce dust-related hazards.

Power tool use and care

16. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate

for which it was designed.

17. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

18. Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrmaschine
Modell:	BHR162Z
Breite:	79 mm
Tiefe:	296 mm
Gewicht:	2100 g
Produktfarbe:	Black, Blue
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	250 mm
Energiequelle:	Akku
Bohrdurchmesser in Beton (max.):	16 mm
Bohrdruchmesser in Stahl (max.):	13 mm
Bohrdurchmesser in Holz (max.):	24 mm
Nenndrehzahl (max.):	1500 RPM
Eingebautes Licht:	Ja
Akku-/Batteriespannung:	14.4 V
Schlagzahl:	5000 BPM