Makita 181434-7 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita 181434-7 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
1
Safety Data Sheet
Issued: July 1, 2011
SHELL TELLUS S2 M
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY
Product name: SHELL TELLUS S2 M
Product type: Hydraulic oil
Supplier: Showa Shell Sekiyu K.K.
Address: Daiba Frontier Building.3-2,Daiba 2 Chome,
Minato-ku,Tokyo 135,JAPAN
Contact numbers:
Telephone:
Fax:
03-5531-5766
03-5531-5768
Emergency telephone number:
Showa Shell Sekiyu K.K.
03-5531-5768
2. COMPOSITION/INFORMATION ON INGREDIENTS
Preparation description: Blend of highly-refined mineral oils and additives.
Composition: Blend of highly-refined mineral oils and additives.
Dangerous
components/constituents:
On the basis of available information, the components of this
preparation are not expected to impart hazardous properties to
this product.
3. HAZARDS IDENTIFICATION
Human health hazards: No specific hazards under normal use conditions. Contains
mineral oil for which an exposure limit for oil mist applies.
Prolonged or repeated exposure may give rise to dermatitis.
Used oil may contain harmful impurities.
Safety hazards: Not classified as flammable, but will burn.
Environmental hazards: Not readily biodegradable. Expected to have a high potential to
bioaccumulate.
Other information: Not classified as dangerous for supply or conveyance.
4. FIRST AID MEASURES
Symptoms and effects: Not expected to give rise to an acute hazard under normal
conditions of use.
First Aid - Inhalation: In the unlikely event of dizziness or nausea, remove casualty to
fresh air. If symptoms persist, obtain medical attention.
463030 SHELL TELLUS S2 M
2
First Aid - Skin: Remove contaminated clothing and wash affected skin with soap
and water. If persistent irritation occurs, obtain medical attention.
If high pressure injection injuries occur, obtain medical attention
immediately.
First Aid - Eye: Flush eye with copious quantities of water. If persistent irritation
occurs, obtain medical attention.
First Aid - Ingestion: Wash out mouth with water and obtain medical attention. DO
NOT INDUCE VOMITING.
Advice to physicians: Treat symptomatically. Aspiration into the lungs may result in
chemical pneumonitis. Dermatitis may result from prolonged or
repeated exposure.
5. FIRE FIGHTING MEASURES
Specific hazards: Combustion is likely to give rise to a complex mixture of airborne
solid and liquid particulates and gases, including carbon
monoxide, oxides of sulphur, and unidentified organic and
inorganic compounds.
Extinguishing media: Foam and dry chemical powder. Carbon dioxide, sand or earth
may be used for small fires only.
Unsuitable extinguishing
media:
Water in a jet. Use of Halon extinguishers should be avoided for
environmental reasons.
Protective equipment: Proper protective equipment including breathing apparatus must
be worn when approaching a fire in a confined space.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Avoid contact with: skin and eyes.
Personal protection: Wear impermeable gloves and boots.
Environmental
precautions:
Prevent from spreading or entering into drains, ditches or rivers
by using sand, earth, or other appropriate barriers. Inform local
authorities if this cannot be prevented.
Clean-up methods - small
spillage:
Absorb liquid with sand or earth. Sweep up and remove to a
suitable, clearly marked container for disposal in accordance
with local regulations.
Clean-up methods - large
spillage:
Prevent from spreading by making a barrier with sand, earth or
other containment material. Reclaim liquid directly or in an
absorbent. Dispose of as for small spills.
7. HANDLING AND STORAGE
Handling: When handling product in drums, safety footwear should be worn
and proper handling equipment should be used. Prevent
spillages.
Storage: Keep in a cool, dry, well-ventilated place. Use properly labelled
and closable containers. Avoid direct sunlight, heat sources, and
strong oxidizing agents.
Storage temperature: 0 C minimum to 50 C maximum. ° °
Recommended materials: For containers or container linings, use: mild steel or high density
463030 SHELL TELLUS S2 M
3
polyethylene.
Unsuitable materials: For containers or container linings, avoid: PVC.
Other information: Polyethylene containers should not be exposed to high
temperatures because of possible risk of distortion.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering control
measures:
Use local exhaust ventilation if there is a risk of inhalation of
vapours, mists or aerosols.
Occupational exposure
standards:
Threshold limit values are given below. Lower exposure limits
may apply locally:
Component name Limit type Value Unit Other information
Oil mist, mineral 8-hour TWA 5 mg/m3 ACGIH
15-min STEL 10 mg/m3 ACGIH
Hygiene measures: Wash hands before eating, drinking, smoking and using the
toilet.
Respiratory protection: Not normally required. If oil mist cannot be controlled, a
respirator fitted with an organic vapour cartridge combined with a
particulate pre-filter should be used.
Hand protection: PVC or nitrile rubber gloves.
Eye protection: Wear safety glasses or full face shield if splashes are likely to
occur.
Body protection: Minimise all forms of skin contact. Wear overalls to minimise
contamination of personal clothing. Launder overalls and
undergarments regularly.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Liquid at ambient temperature.
Colour: Light brown
Odour: Characteristic mineral oil
Initial boiling point: >280°C
Vapour pressure: < 0.5 Pa at 20°C
Density: See Table 1
Vapour density (air=1): > 1 at 20°C
Pour point: See Table 1
Flash point: See Table 1
Flammability limit - lower: 1% V/V (typical)
Flammability limit - upper: 10% V/V (typical)
Auto-ignition temperature: > 320°C (typical)
Solubility in water: Negligible
10. STABILITY/REACTIVITY
Stability: Stable


Produktspezifikationen

Marke: Makita
Kategorie: Nicht kategorisiert
Modell: 181434-7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Makita 181434-7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Makita

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-