Mackie MDB-2P Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mackie MDB-2P (15 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
O W N E R ’ S M A N U A L
INPUT
PAD
0 dB
-15 dB
THRU
PAD PAD
THRU
INPUT
INPUT
MERGE PAD
THRU
OFF
ON POWER
MDB Series Direct Boxes
2
MDB Series Direct Boxes
Important Safety Instructions
.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance
with the manufacturers instructions.
8.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9.
Only use attachments/accessories specified by the
manufacturer.
10.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
11.
This apparatus shall not be exposed to dripping or splashing, and
no object filled with liquids, such as vases or beer glasses, shall
be placed on the apparatus.
12.
This device complies with Part 5 of the FCC Rules. Operation is
subject to the following two conditions: () this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV
technician for help.
CAUTION:
Changes or modifications to this device not expressly
approved by LOUD Audio LLC could void the user's authority to
operate the equipment under FCC rules.
WARNING — To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or moisture.
3.
This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This device should be
installed and operated with minimum distance 20cm between
the radiator & your body.
4.
This apparatus does not exceed the Class A/Class B
(whichever is applicable) limits for radio noise emissions
from digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communications.
ATTENTION
— Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux
appareils numériques de class A/de class B (selon le cas)
prescrites dans le réglement sur le brouillage radioélectrique
édicté par les ministere des communications du Canada.
5.
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
() this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
Lexploitation est autorisée aux deux conditions suivantes:
() l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible den
compromettre le fonctionnement.
6.
Exposure to extremely high noise levels may cause permanent
hearing loss. Individuals vary considerably in susceptibility to
noise-induced hearing loss, but nearly everyone will lose some
hearing if exposed to suciently intense noise for a period of
time. The U.S. Government’s Occupational Safety and Health
Administration (OSHA) has specified the permissible noise
level exposures shown in the following chart.
According to OSHA, any exposure in excess of these
permissible limits could result in some hearing loss. To
ensure against potentially dangerous exposure to high sound
pressure levels, it is recommended that all persons exposed
to equipment capable of producing high sound pressure levels
use hearing protectors while the equipment is in operation.
Ear plugs or protectors in the ear canals or over the ears must
be worn when operating the equipment in order to prevent
permanent hearing loss if exposure is in excess of the limits set
forth here:
Duration, per
day in hours Sound Level dBA,
Slow Response Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 100 Very loud classical music
1.5 102
1 105 Ryan screaming at Troy about deadlines
0.5 110
0.25 or less 115 Loudest parts at a rock concert
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE
directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and
electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due
to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product
will contribute to the eective usage of natural resources. For more information about where you can drop o your waste equipment for recycling, please
contact your local city oce, waste authority, or your household waste disposal service.
Owners Manual
3
Owner’s Manual
Contents
Part No. SW1224 Rev. A 01/18
©2018 LOUD Audio, LLC All Rights Reserved.
Features
MDB-1P Passive Direct Box
Perfect for guitars, basses, and more for stage and studio
High-impedance 1/4" input with Thru output
Balanced male XLR output connector with Ground Lif
Ultra-low noise and distortion
-15dB pad ensures distortion-free performance when
connecting to high-output sources
Built-Like-A-Tank™ construction
MDB-2P Stereo Passive Direct Box
Perfect for stereo sources like keyboards and media
players
High-impedance 1/4" inputs with Thru outputs
Balanced XLR outputs with Ground Lif
Ultra-low noise and distortion
-15dB pads ensure distortion-free performance when
connecting to high-output sources
Built-Like-A-Tank™ construction
MDB-1A Active Direct Box
Active circuitry oers higher headroom for ultra-low
noise and distortion-free performance
High-impedance 1/4" input with Thru output
Balanced XLR output with Ground Lif
Low Cut and Polarity switches
Merge switch allows connection of stereo sources which
are then summed to mono at the output, perfect for stereo
sources like keyboards and media players
-20dB pad ensures distortion-free performance
when connecting to high-level sources
Powered via 48v Phantom Power
Built-Like-A-Tank™ construction
Like us
Follow us
Watch our dang videos
Important Safety Instructions 2 ........................................
Contents 3 ...........................................................................
Features 3 ............................................................................
Introduction 4 .....................................................................
How To Use This Manual 4 .................................................
Getting Started 4 ................................................................
Things To Remember 4 .......................................................
Hookup Diagrams 5 ............................................................
MDB Series Direct Boxes: Front Panel Features 8 ...........
1. Input Jacks 8 ............................................................
2. Thru Jacks 8 ............................................................
3. Pad Switch 8 ............................................................
4. Merge Switch [MDB-1A] 8 ......................................
MBS On / O Switches 8 ............................................
MDB Series Direct Boxes: Rear Panel Features 9 ............
5. XLR Output Jacks 9 ................................................
6. Ground Lif Switch 9 ...............................................
7. Low Cut Switch [MDB-1A] 9 ....................................
8. Polarity Switch [MDB-1A] 9 ...................................
Appendix A: Service Information 10 ..................................
Appendix B: Technical Information 11 ...............................
MDB Series Direct Boxes Dimensions 12 ...................
MDB Series Direct Boxes Block Diagram 13 ..............
Limited Warranty 14 ............................................................


Produktspezifikationen

Marke: Mackie
Kategorie: Nicht kategorisiert
Modell: MDB-2P

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mackie MDB-2P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mackie

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-