LYYT ISRF1 Bedienungsanleitung

LYYT Regler ISRF1

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr LYYT ISRF1 (2 Seiten) in der Kategorie Regler. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
ISRF1
IN-LINE WIRELESS CONTROLLER
FOR SINGLE COLOUR LED TAPE
Item ref: 153.796UK
User Manual
WARNING: This product intended for professional installation of single colour LED tape and should be is
connected by qualified personnel in accordance with electrical safety standards. Ensure that the rated load
indicated is not exceeded.
Installation
The IS 1 controller can be employed to control single colour LED tape operating from a RF
5-24Vdc power supply. Maximum short term current load is rated at 12A.
For constant full power output, it is advised to limit this to 6A load.
For Lyyt single colour LED tape (156.705-1 6. 68UK), is recommended to connect no 5 7 it
more than 3 5m tapes radially from the same controller. When connecting more than one x
5m tape in this way, it will be necessary to remove the connectors and strip the wires for DC
connec using termina strips. I is also advised to use bypass wiring instead o connecting tion l t f
end- -end to avoid noticeable voltage drop at the furthes end fro the powe supply. to t m r
153.796 User Manual UK
Remote control
1. POWER LED on / standby button
2. LIGHT switches from pattern to static light mode
3. 100% sets static light brightness to 100%
4. MODE+ steps upwards through modes
5. SPEED- reduces speed of pattern
6. MODE- steps downwards through modes
7. BRIGHT+ increases brightness
8. BRIGHT- decreases brightness
9. 50% sets static light brightness to 50%
10. 25% sets static light brightness to 25%
11. SPEED+ increases speed of pattern
ď‚·
Remove the clear tab from the handheld remote to engage the battery (replacement CR2025 button cell)
ď‚·
To switch LEDs on, press the POWER button (from standby, the last setting is resumed)
ď‚·
If there is no response from the handset, it may be necessary to pair the handset to the controller (see “ ” below)Pairing
ď‚·
MODE+ and - buttons step through the 8 preset programmes in sequence (shown below)
ď‚·
SPEED+ or - will alter the rate of change in the selected mode
ď‚·
LIGHT button overrides the pattern mode to give a static light setting
ď‚·
BRIGHT+ or - will change the brightness in static mode
ď‚·
Preset brightness can be jumped to via the 25%, 50% or 100% buttons
ď‚·
Press POWER to enter standby mode (all LEDs off)
Pairing : If the LED controller does not respond to the RF remote handset, disconnect DC power from the controller.
Reconnect the DC power to the controller and hold down the “100%” and “25%” buttons simultaneously.
The controller and handset should now be paired and the controller should respond to the handset.
Preset
Name
Description
1
Random Glow
Fade in and out at random brightness & intervals
2
Regular Glow
Fade between fully on and off at a regular rate
3
Half Glow
Fade between fully on and half-on at a regular rate
4
Flicker
Flash on and off at a fast regular rate
5
Offset Flash
Flash on and off with pause at a regular rate
6
Even Flash
Flash on and off evenly at a regular rate
7
SOS
3 short - 3 long - 3 short Morse Code flash sequence
8
Strobe
Very short burst at regular intervals
Specifications
Power supply
5-24Vdc, 12A (50% duty cycle) or 6A (100% duty cycle)
Remote control frequency
433MHz
Lead length (power input, LED output)
100mm
Connections
DC5521 connectors
Controller dimensions
42 x 13 x 5mm
Weight
4.8g
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 201 . AVSL Group Ltd.7


Produktspezifikationen

Marke: LYYT
Kategorie: Regler
Modell: ISRF1

Brauchst du Hilfe?

Wenn Sie Hilfe mit LYYT ISRF1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Regler LYYT

Bedienungsanleitung Regler

Neueste Bedienungsanleitung fĂĽr -Kategorien-