Luxul Epic 4 ABR-4500 Bedienungsanleitung

Luxul Router Epic 4 ABR-4500

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Luxul Epic 4 ABR-4500 (8 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

READ ME FIRST

QUICK INSTALL GUIDE

Epic 4

Multi-WAN Gigabit Router

ABR-4500

Includes:

Multi-WAN Gigabit Router

Rack Mounting Ears (2)

Rubber Feet (4)

Power Cord

SETUP AND CONFIGURATION

Physical Installation

The router can be rack-mounted or used as a desktop router. Install

the router in a stable/safe place to avoid any possible damage. Make sure

there is adequate space around the router for ventilation and proper

heat dissipation. Avoid placement in direct sunlight. Do not place heavy

articles on the router and verify the ground connection of the outlet

is functioning properly.

Desktop/Shelf Installation

For desktop/shelf installation, attach the four rubber feet to the corner

indentations on the bottom of the router, then place the router on

a solid, level platform.

Rack Installation

Use the included L brackets for convenient installation in a 19-inch server or

AV rack. As shown below, use four screws to attach the L-shaped brackets on

either sides of the router, and mount the switch horizontally in the rack. Use

your desired hardware to ax the router supports to the rack.

Install Brackets for Rack-Mounting Attach Feet for Desktop Installation

Connecting Ethernet and Power

Before installing the router, test the Internet connection to verify that it

is functioning properly. Once Internet access is conﬁrmed to be working,

follow the steps below for installation and conﬁguration.

Connecting Ethernet

Luxul recommends Category-5, super Category-5 or Category-6 unshielded

twisted pair (CAT5/CAT5e/CAT6 UTP). To ensure best performance and

stable data transmission at 1000 Mbps, use Category-6 shielded twisted pair.

1. Connect the WAN: Connect the Internet cable from a telco/ISP

modem/router to the dedicated WAN 1 port on the Epic 4.

2. Connect the LAN: Connect a cable from the dedicated LAN 1 port on

the Epic 4 to a switch, access point, or computer.

For best performance, and to maximize available ports, Luxul recommends

connecting all LAN devices to a Luxul switch, then connecting that switch

to the Epic 4 LAN port via a single Ethernet cable.

nNOTE: WAN 1 and LAN 1-4 are conﬁgured by default. The Epic 4

must be conﬁgured to provide additional WAN ports.

nNOTE: Connect all LAN devices to a Luxul switch, then connect that

switch to the Epic 4 for best results.

Connecting Power

Use the included power cable to connect the Epic 4 to a surge-protected

outlet. The AC input socket and power switch are on the rear panel. The

built-in power supply supports 100~240VAC at 50/60Hz.

Produktspezifikationen

Marke:	Luxul
Kategorie:	Router
Modell:	Epic 4 ABR-4500
Breite:	178.8 mm
Gewicht:	1300 g
Produktfarbe:	Schwarz
Höhe:	44.5 mm
Energiequelle:	AC
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	32 - 104 °C
Netzstandard:	IEEE 802.1Q
Unterstützte Sicherheitsalgorithmen:	SSID
Quality of Service (QoS) Support:	Ja
Stromverbrauch (Standardbetrieb):	12 W
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	LAN, Power, USB, WAN
Auto MDI/MDI-X:	Ja
Routing-/Switching-Kapazität:	1 Gbit/s
Rack-Einbau:	Ja
Anzahl der USB-Anschlüsse:	1
USB-Version:	3.2 Gen 1 (3.1 Gen 1)
Mobilfunknetzgenerierung:	Nicht unterstützt
VLAN-Unterstützung:	Ja
Ethernet Schnittstellen Typ:	Gigabit Ethernet
Nachhaltigkeitszertifikate:	CE, RoHS
Eingangsstrom:	0.3 A
Ethernet-WAN:	Ja
Verkabelungstechnologie:	10/100/1000Base-T(X)
VPN Unterstützung:	PPTP, L2TP, IPsec
Firewall:	Ja
DHCP-Server:	Ja
Reset-Knopf:	Ja
Durchsatz:	1 Gbit/s
Verkehrssteuerung:	Ja