Logitech Z-5300 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Logitech Z-5300 (9 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
Setup
Installation
Instalación
Logitech®
Z-5300
About your Logitech® Z-5300 speaker system
2
English
Safety
1
English
Thank you for purchasing the Z-5300 speaker system from Logitech. The Z-5300 system will raise your
audio experience to new levels. To discover more Logitech products, visit us on the web at®
www.logitech.com.
1. Subwoofer
2. Right front speaker
red plug
3. Right rear speaker
white plug
4. SoundTouchTM wired
remote control
black d-sub connector
5. Power cord
6. Power/Standby switch
7. A udio input cable to PC
green, black and
orange plugs
8. Left rear speaker
black plug
9. Source selector switch
10. Left front speaker
yellow plug
11. Center channel speaker
orange plug
LEFT
FRONT
RIGHT
REAR
GREEN BLACK
CENT ER
2CH 4 CH 5.1CH
RIGHT
FRONT
LEFT
REAR
ORANGE
POWERSWIT CH
GREEN
BLACK
ORANGE
GREEN
BLACK
ORANGE
6
1
4
9
5
2
10
3
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Unplug the speakers from the computer and from
the electrical outlet before cleaning them with a
dry cloth.
Install in accordance with the manufacturer’s
instructions.
Place the speakers in a stable location so they will
not fall causing damage to the speakers or bodily
harm.
Do not use the speakers near water, and do not
immerse them in any liquid or pour any liquid on
them.
Do not block the openings in the speaker
cabinets, never push objects into speaker vents or
slots because of fire or electric shock hazards, and
provide sufficient space around the speakers for
proper ventilation.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
plug. A polarized plug has two blades with one
wider than the other. The wide blade is provided
for your safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
Operate the speakers only from the low level
audio line out jack of the computer or of an audio
device.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by the
manufacturer.
For added protection during lightning storms,
unplug the speakers from the electrical outlet and
turn off the computer.
Unplug this apparatus when unused for long
periods of time.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-
supply cord or plug has been damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has
been dropped.
Refer all servicing to qualified service personnel.
The speakers should be disconnected from the
mains by placing the power/standby switch in the
standby position and unplugging the power cord
of the speakers from the AC mains receptacle.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
IMPORTANT SAFETY INFORMATION
CAUTION
ELECTRIC SHOCK HAZARD
8
11
7
Mounting your speakers to a wall
Your Logitech Z-5300 speaker satellites are wall mountable. Swivel the satellite
base to desired position, and use the notches to hang your speaker on
appropriate wall anchors.
Enjoying your Logitech® Z-5300 speakers
Access these controls on the SoundtouchTM wired remote control:
A. System Volume
While idle, this knob adjusts the overall system volume.
This knob is also used to adjust additional levels.
B. Level
This feature allows you to adjust the following levels:
system volume, subwoofer volume, fader, and
center. Press the level button to scroll through
the options and use the system volume knob to adjust
the levels.
Subwoofer Volume
Adjusts the bass level of the subwoofer.
Fader
Adjusts the volume level of the rear speakers.
Center
Adjusts the volume level of the center speaker.
C. Power/Standby
Toggles between power on and standby mode.
D. Headphone Jack
When headphones are used with your Z-5300 system, the speakers will mute automatically for private
listening.
E. Matrix Surround Sound
Use this feature to create a full surround sound experience from stereo sound content, such as music
CDs or games without a 5.1 soundtrack. Matrix Surround Sound can be used with a 2-channel, 4-
channel or 6-channel sound card.
Setting up your Logitech® Z-5300 speakers
Important: For your safety, set up the system before plugging it into a power source.
1. Before attaching the cables to the subwoofer, position the two front satellite speakers on either side of
your monitor about the same distance from each other as from you. Angle them to face you. Place the
other satellite speakers behind you and about the same distance apart as the front speakers. Position
the center channel speaker on top of your monitor or on your desk in between your monitor and
keyboard. Depending on where you place it, adjust the stand to direct the sound toward you. For best
sound quality, place the subwoofer on the floor beneath your desk. Be sure to allow a minimum of 6
inches around all sides of subwoofer for adequate ventilation.
2. Insert the colored plug from each satellite speaker into the corresponding colored jacks on the back of
the subwoofer. Connect the d-sub plug from the SoundTouchTM wired remote control to the subwoofer
as shown on the previous page. Carefully align the pins before inserting the plug, and screw down the
connector.
3. A. Connect the speakers to your PC. Follow the directions below that apply to the type of sound card
on your PC.
If you have a 2-channel sound card: Select2 on the source selector switch on the subwoofer.
Connect the green plug from the audio input cable to theline out jack on your PC sound card.
With this input setting, your speakers will upmix the stereo signal and create center, rear right and
rear left signals for your speakers.
If you have a 4-channel sound card: Select4 on the source selector switch on the subwoofer.
Connect the green plug from the audio input cable to the front jack, and the black plug into the rear
jack on your PC sound card. With this input setting, your speakers will upmix the 4-channel signal and
create a center signal for your speakers.
If you have a 6-channel sound card: Select5.1 on the source selector switch on the subwoofer.
Connect the colored jacks on the audio input cable to the jacks on your PC sound card, making sure
to match the colors.
B. If you have a video game console (PlayStation®, PlayStation®2, Xbox, or GameCube®):
Select2 on the source selector switch. Connect the green plug from the audio input cable to the
stereo mini jack on the included video game adapter. Connect
the red and white RCA audio cables from your video game
console to the RCA audio jacks to the video game adapter.
4. Plug the subwoofers power cord into an electrical outlet.
Setup
Setup - Operation
4
English
3
English
Notches
volume s ub
fa der
c ent
er
m
atri x
o
ff /o n
C
A
B
D
E


Produktspezifikationen

Marke: Logitech
Kategorie: Lautsprecher
Modell: Z-5300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Logitech Z-5300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Logitech

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-