Lindy BTA-30 Bedienungsanleitung
Lindy
Bluetooth-EmpfÀnger
BTA-30
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Lindy BTA-30 (18 Seiten) in der Kategorie Bluetooth-EmpfĂ€nger. Dieser Bedienungsanleitung war fĂŒr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/18
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (March 2014)
BTA-30
Bluetooth Audio Receiver with NFC
User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano
No. 20407
www.lindy.com
Tested to Comply with
FCC Standards
For Home and OïŹce Use
User Manual English
Introduction
Thank you for purchasing the LINDY BTA-30 Bluetooth Audio Receiver with NFC. The BTA-30 adds Bluetooth
audio connection capabilities to HiFi, Headphones or speaker systems with 3.5mm inputs or Phono*. Compatible
with modern Bluetooth devices, and with the added benefit of NFC for easy pairing, the BTA-30 seamlessly
delivers audio from your smartphone, tablet or other Bluetooth enabled devices for playback directly on your audio
system.
Simple to set-up and with a maximum range of 10m, the BTA-30 is ideal for home & mobile use, helping you make
the most of your mobile audio experience.
*requires 35.mm to Phono cable, not included.
Package Contents
î
BTA-30 Bluetooth Audio Receiver with NFC
î
USB Micro-B cable
î
3.5mm stereo audio cable
î
LINDY Manual
Features
î
NFC Easy Pairing
î
3.5mm analogue audio output
î
Built in Microphone for Speakerphone functionality
î
USB Micro-B female - power & charging
î
Internal rechargeable 230mAh lithium-ion polymer battery
o 2 hours charging time
o Up to 12 hours playback
î
10m eïŹective range
î
A2DP Bluetooth proïŹle support
SpeciïŹcation
î
Bluetooth 3.0 +EDR with A2DP
î
Bluetooth Frequency: 2.402-2.480GHz
î
Supported Codecs: SBC
î
Audio output: 1 x 3.5mm female
î
Signal To Noise Ratio: 94dB â„
î
Compression ratio: 44.1 / 48KHz
î
Frequency Response: 100Hz ~ 22kHz
î
Algorithmic Delay: 40ms
î
THD+N: 0.03% @ 20mW/f = 1kHz
î
Chipset: BM81SPK02
î
Weight: 40 grams
î
Operation temperature: -10°C ~ +55°C, Storage tempe rature: -20°C ~ +60°C
Note â If you want to use the BTA-30 with a Phono input on your HiFi / Speaker System, please use a 3.5mm to
Phone cable, such as LINDY No. 35490 â 7.
User Manual English
Installation
Operating via USB power (Recommended)
Connect the supplied USB Type A to Micro-B cable
to the Power & Charging port of the BTA-30 and
connect this to a free USB port on your HiFi, TV or
LINDY USB power adapter.
Operating via the internal battery
Ensure the BTA-30âs internal battery is fully charged.
2 hours charging provides a full battery &
approximately 12 hours of operation
Connect the BTA-30 to your HiFi, Headphones or speaker system with the included 3.5mm cable.
Operation
Power on the BTA-30
1. Press & hold the Power Button to turn on the BTA-30. The Bluetooth Status light with flash Blue and you
can begin the Bluetooth Pairing process.
2. Press & hold the Power Button again to turn the Receiver oïŹ.
Pairing with NFC devices
1. Start the NFC function on your device.
2. Tap your source device on the top of the LINDY BTA-30.
3. Your device may prompt you to proceed with pairing, if so select yes.
4. A connected to âLINDY BTA-30â message will appear on your source device. You can now play audio via
the BTA-30.
Pairing with Bluetooth devices
1. Activate your source deviceâs Bluetooth and search for available devices
2. Select the âLINDY BTA-30â and follow the onscreen prompts. If a PIN is required enter â0000â or â1234â
3. Your source device will connect to the BTA-30 and you can start playing audio from your device.
Bluetooth Status
(Blue) Low Power / External
Power / Charge Indicator
(Red)
Speakerphone Mic
Power Button
Speakerphone
Pairing Button
3.5mm Audio Out
USB Micro-B
Power & Charging
NFC tag area
Produktspezifikationen
| Marke: | Lindy |
| Kategorie: | Bluetooth-EmpfÀnger |
| Modell: | BTA-30 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Lindy BTA-30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bluetooth-EmpfÀnger Lindy
20 August 2024
Bedienungsanleitung Bluetooth-EmpfÀnger
- Bluetooth-EmpfÀnger Gembird
- Bluetooth-EmpfÀnger Hama
- Bluetooth-EmpfÀnger Logitech
- Bluetooth-EmpfÀnger König
- Bluetooth-EmpfÀnger Marmitek
- Bluetooth-EmpfÀnger Adj
- Bluetooth-EmpfÀnger Monoprice
- Bluetooth-EmpfÀnger Naxa
- Bluetooth-EmpfÀnger StarTech.com
- Bluetooth-EmpfÀnger Aluratek
- Bluetooth-EmpfÀnger Legrand
- Bluetooth-EmpfÀnger Vantec
- Bluetooth-EmpfÀnger Oehlbach
- Bluetooth-EmpfÀnger Wavemaster
Neueste Bedienungsanleitung fĂŒr -Kategorien-
10 September 2024
5 September 2024
31 August 2024
30 August 2024
19 August 2024
19 August 2024
18 August 2024
17 August 2024
15 August 2024
14 August 2024