LiftMaster 8500WMC Bedienungsanleitung
LiftMaster
Garagentoröffner
8500WMC
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für LiftMaster 8500WMC (123 Seiten) in der Kategorie Garagentoröffner. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/123
•Please read this manual and the
enclosed safety materials carefully!
•The door WILL NOT CLOSE unless the
Protector System® and cable tension
monitor are connected and properly aligned.
•Periodic checks of the garage door opener
are required to ensure safe operation.
•The model number is located on the
front cover of the opener.
•This garage door opener is ONLY
compatible with myQ® and Security+2.0®
accessories.
•Attach warning labels to the location
indicated on label.
This product is intended for installation only by trained garage door technicians. This product may
require adjustments to door springs and/or track configurations. This product is not intended for
use on low headroom tracks or garage doors utilizing extension springs.
For Residential Use
Install On Sectional Doors With Torsion Assemblies Only
Wall Mount Wi-Fi® Garage Door Opener
Models 8500WMC, 8500WMC-267
LiftMaster
300 Windsor Drive
Oak Brook, IL 60523
Register your garage door opener to receive
updates and offers from LiftMaster
Take a photo of the
camera icon including
the points ( ).
Send it in by texting
the photo to 71403
(US) or visit
www.Liftmaster.photo
(Global)
SM
2
Preparation
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of if you do not comply with the serious injury or death
warnings that accompany them. The hazard may come from something mechanical or
from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your garage door and/or the garage door opener if you do not comply with the
cautionary statements that accompany it. Read them carefully.
Mechanical
Electrical
Safety Symbol and Signal Word Review
This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in
strict accordance with the instructions and warnings contained in this manual.
Table of Contents
PREPARATION 2
myQ Serial Number ...................................... 2
Safety Symbol and Signal Word Review ...... 2
Unattended Operation ................................... 2
Planning ........................................................3
Before You Connect with Your Smartphone 4
Preparing Your Garage Door ........................ 5
Tools Needed ................................................ 5
Carton Inventory ........................................... 6
Additional Items You May Need ...................6
ASSEMBLY 7
Attach the Collar to the
Garage Door Opener .....................................7
Attach Mounting Bracket to
Garage Door Opener .....................................8
INSTALLATION 8
Position and Mount the
Garage Door Opener .....................................9
Attach the Emergency Release Rope
and Handle ..................................................10
Install Automatic Door Lock .......................10
Attach the Cable Tension
Monitor (Required) ..................................... 11
Install the Door Control
(Smart Control Panel
®) ...............................12
Install myQ Remote LED Light ................... 13
Install the Protector System ...................... 14
Connect Power ............................................ 17
Install the Battery Backup ........................... 19
ADJUSTMENT 20
Program the Travel ..................................... 20
Automatic Force Set Up .............................. 20
Test the Safety Reversal System ................21
Test the Protector System .........................21
Test Cable Tension Monitor ........................22
Test Automatic Door Lock ..........................22
To Open the Door Manually ........................ 22
OPERATION 23
Using Your Garage Door Opener ................24
Connect with Your Smartphone .................25
Using the Door Control ...............................26
PROGRAMMING 28
893MAX Remote Control ............................ 28
Reprogramming myQ Remote
LED Light..................................................... 29
To Erase the Memory ..................................29
HomeLink® ..................................................30
MAINTENANCE 31
Care of Your Garage Door Opener .............. 31
TROUBLESHOOTING 32
Diagnostic Chart .......................................... 32
Additional Troubleshooting .........................33
REPAIR PARTS 35
Installation Parts .........................................35
Garage Door Opener Assembly Parts ......... 36
CONTACT INFORMATION 36
ACCESSORIES 37
WARRANTY 38
Automatic Garage Door Opener
Safety & Maintenance Guide 39
Date of Purchase:
Write down the following information for future reference:
Product Serial Number:
myQ Serial Number:
Serial Numbers
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause
cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Timer-to-Close (TTC) feature, the myQ Smartphone Control app, and myQ Garage Door and Gate Monitor are examples of
unattended close and are to be used ONLY with sectional doors. Any device or feature that allows the door to close without being in the
line of sight of the door is considered unattended close. The Timer-to-Close (TTC) feature, the myQ Smartphone Control, and any other
myQ devices are to be used ONLY with sectional doors.
myQ Remote LED Light must be installed to enable use of Timer To Close or myQ Smartphone Control of the door.
myQ Serial Number
Unattended Operation
3
Preparation
Survey your area to see if any of the conditions below apply to your installation.
Depending on your requirements, additional materials may be required.
THIS DOOR OPENER IS COMPATIBLE WITH:
• Doors that use a torsion bar and springs. The torsion bar must be 1" (2.5 cm)
diameter. NOT compatible with reverse wound drums.
• 4-6" (10-15 cm) drums, not to be used on tapered drums over 6" (15 cm).
• 3 to 3.9 inch (7.6cm to 9.9cm) drums may be used on doors up to 430lbs.
(195.4Kgs)
• High lift (up to 54" (137.2 cm) high) and standard lift sectional doors up to 14 ft.
(4.3 m) high.
• Doors up to 18 ft. (5.5 m) wide.
• Doors up to 180 sq. ft. (16.7 sq. m).
Review or inspect proposed installation
area. The door opener can be installed on
the left or right side of door. Select the side
that meets the requirements listed below.
a. Must have minimum of 2.5" (6.4 cm)
between the wall and the center of the
torsion bar.
b. Must have minimum of 3" (7.6 cm)
between the ceiling and the center of
torsion bar.
c. Must have minimum of 8.5" (21.6cm)
between the side wall (or obstruction)
and the end of torsion bar.
d. The torsion bar must extend at least
1.5" (3.81 cm) past the bearing.
This may vary depending on your
installation requirements.
e. An electric outlet is required within
6ft. (1.83 m) of the installation area.
If outlet does not exist, contact a
qualified electrician.
f. Depending upon building
construction, extension brackets or
wood blocks may be needed to install
safety reversing sensors and cable
tension monitor.
g. Alternate floor mounting of the
safety reversing sensors will require
hardware (not provided).
h. Check the seal on the bottom of the
door. Any gap between the floor and
the bottom of the door must not
exceed 1/4 inch (6 mm). Otherwise,
the safety reversal system may not
work properly.
NOTE: Inspect the torsion bar while the
door is raised and lowered. It is important
that there is no noticeable movement up
and down or left and right. If the movement
is not corrected, the life of the garage door
opener will be greatly reduced.
a
b
h
c
d
e
f
g
Torsion
bar
2.5"
(6.4 cm)
3"
(7.6 cm)
Wall or
obstruction
Torsion bar
8.5"
(21.6cm)
Safety
reversing
sensor
myQ Remote
LED Light
Automatic
door lock
Door spring
Planning
Produktspezifikationen
| Marke: | LiftMaster |
| Kategorie: | Garagentoröffner |
| Modell: | 8500WMC |
Brauchst du Hilfe?
Wenn Sie Hilfe mit LiftMaster 8500WMC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Garagentoröffner LiftMaster
21 August 2024
18 August 2024
17 August 2024
17 August 2024
16 August 2024
10 August 2024
8 August 2024
3 August 2024
31 Juli 2024
3 Mai 2024
Bedienungsanleitung Garagentoröffner
- Garagentoröffner Einhell
- Garagentoröffner Berner
- Garagentoröffner RADEMACHER
- Garagentoröffner Chamberlain
- Garagentoröffner Craftsman
- Garagentoröffner ProfiTech
- Garagentoröffner Hormann
- Garagentoröffner Sommer
- Garagentoröffner Marantec
- Garagentoröffner Superrollo
- Garagentoröffner Somfy
- Garagentoröffner Dickert
- Garagentoröffner DITEC
- Garagentoröffner Doco
- Garagentoröffner Doorsystems
- Garagentoröffner Entrematic
- Garagentoröffner FAAC
- Garagentoröffner Geba Tronic
- Garagentoröffner Goris
- Garagentoröffner Homentry
- Garagentoröffner MAC
- Garagentoröffner Novoferm
- Garagentoröffner Novotecnica
- Garagentoröffner Seculux
- Garagentoröffner Silver
- Garagentoröffner Skylink
- Garagentoröffner Tormatic
- Garagentoröffner Univer
- Garagentoröffner Maveo
- Garagentoröffner Aperto
- Garagentoröffner Abon
Neueste Bedienungsanleitung für -Kategorien-
1 Oktober 2024
30 September 2024
29 September 2024
23 September 2024
22 September 2024
14 September 2024
30 August 2024
28 August 2024
27 August 2024
27 August 2024