LiftMaster 1270LMC Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für LiftMaster 1270LMC (36 Seiten) in der Kategorie Garagentoröffner. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
TM
Garage Door Opener
Model 1270LMC
- 1/2 HP -
For Residential Use Only
®
Owner's Manual
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System®is connected and
properly aligned
Periodic checks and adjustment of the opener are required to ensure safe
operation.
The model number label is located under the light lens on the left side of your
opener.
Start by reviewing these important safety alert symbols
2
CONTENTS PAGE
A review of safety alert symbols ...............................2
You'll need tools........................................................3
Safety information regarding garage door locks
and ropes...............................................................3
Testing your garage door for sticking, binding
and balance ...........................................................3
llustration of sectional door installation ....................4
Illustration of one-piece door installation...................4
Carton inventory........................................................5
Hardware inventory...................................................5
Assembly Section - Pages 6 – 7
Attach T-rail to opener ............................................6
Set the belt tension .................................................6
Attach belt cap retainer...........................................7
Installation Section - Pages 8 – 23
Installation safety instructions.................................7
Determine header bracket location
Sectional door.......................................................8
One-piece door .....................................................9
Install header bracket............................................10
Attach the T-rail to header bracket........................11
Position the opener...............................................12
Hang the opener ...................................................13
Install the door control...........................................14
Install the lights and lenses...................................15
Attach manual release rope and handle ...............15
CONTENTS PAGE
Electrical connections ...........................................16
The Protector System®safety reversing
sensor information ................................................17
Install the safety reversing sensor ..................18, 19
Fasten door bracket (sectional door) ....................20
Fasten door bracket (one-piece door)...................21
Connect door arm to trolley (sectional door).........22
Connect door arm to trolley (one-piece door) .......23
Adjustment Section - Pages 24 – 26
Travel limit adjustments ........................................24
Force adjustments ................................................25
Test the Protector System®...................................26
Test the safety reverse system.............................26
Operation safety instructions ..................................27
Care of your opener................................................27
Maintenance schedule............................................27
Operation of your opener........................................28
Receiver & remote control programming ................29
Having a problem?............................................30, 31
Repair parts, rail assembly .....................................32
Repair parts, installation .........................................32
Repair parts, opener assembly...............................33
Accessories.............................................................34
Index .......................................................................35
How to order repair parts ........................................36
Warranty .................................................................36
When you see these safety symbols on the following pages, they will alert you to the possibility of
serious injuries or death
if you do not comply with the corresponding instructions. The hazard may
come from something mechanical or from electric shock.
Read the instructions carefully.
When you see this safety symbol on the following pages, it will alert you to the possibility of damage
to your garage door and/or the garage door opener if you do not comply with the corresponding
instructions.
Read the instructions carefully.
This garage door opener is designed and tested to offer safe service provided it is installed, operated,
maintained and tested in strict accordance with the safety instructions contained in this manual.
Mechanical Electrical
WARNING WARNING
CAUTION
Pliers
Wire Cutters
Claw Hammer
Hack Saw
Screwdriver Adjustable End Wrench
1/2" and 7/16" Sockets
and Wrench
Drill
Tape Measure
2
1
Stepladder
Pencil
3/16", 5/16" and
5/32" Drill Bits
Carpenter's
Level
You'll Need Tools
During assembly, installation and adjustment of the opener, instructions will call for hand tools shown below.
SECTIONAL DOOR ONE-PIECE DOOR
WARNING CAUTION
3
To avoid damage to the garage door and
opener, disable locks before installing and
operating the opener. Use a wood screw or nail
to hold locks in the "open" (unlocked) position.
Operation at other than 120V 60 Hz will cause
opener malfunction and damage.
An unbalanced garage door might not reverse
when required and someone under the door
could be seriously injured or killed.
If your garage door binds, sticks or is out of
balance, call for professional garage door
service.
Garage doors, door springs, cables,
pulleys, brackets and their hardware, are
under extreme tension and can cause serious
injury or death.
Do not try to loosen, move or
adjust them yourself!
Ropes left on a garage door could cause
someone to become entangled and killed.
Remove all ropes connected to the door before
installing and operating the opener.
Identify the type and height of your door and any
special conditions that exist and any additional
materials that may be required by referring to page 4.
Before you begin, complete the following test to
make sure your door is balanced, and is not
sticking or binding:
• Lift the door about halfway as shown. Release the
door. It should stay in place, supported entirely by
its springs.
• Raise and lower the door to see if there is any
binding or sticking.


Produktspezifikationen

Marke: LiftMaster
Kategorie: Garagentoröffner
Modell: 1270LMC

Brauchst du Hilfe?

Wenn Sie Hilfe mit LiftMaster 1270LMC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Garagentoröffner LiftMaster

Bedienungsanleitung Garagentoröffner

Neueste Bedienungsanleitung für -Kategorien-