LG E-BP06LU10 Bedienungsanleitung

LG Nicht kategorisiert E-BP06LU10

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr LG E-BP06LU10 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
• Please pay attention to handling Electrostatic
Sensitive Devices, you may use anti-static
products such as wrist straps, heel straps, mats
to protect your body from electrostatic.
• Make sure you have a personal computer with
one or two open USB ports before connecting
the drive to your computer.
• Power for all other devices should be turn off
before attaching the cables.
Connect the drive to the computer as shown in
figure.
1Connect the USB 2.0 (Y type) cable to
the drive.
2Connect the other end of the USB 2.0
cable to your computer.
3The drive may get its power from the PC
USB power. All systems may not meet
USB power requirements and full
performance may not be achieved.
In this case, connect to the USB power
cable.
When the computer is ready, confirm that the
drive is detected. And then, insert the supplied
software CD into the drive and install the
software.
• Please do not connect the USB cables by any means other than specified above.
Using the wrong type of cable with this drive can cause it to malfunction.
• The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord
extension set on electrical portable outlet device must be positioned so that it is not subject to splashing
or ingress of moisture.
Installation
NOTES
Connecting to computer
Hardware Installation
NOTES
USB Power cable
1
2
3
1. Disc Tray
2. Drive activity indicator
The LED is used to indicate the operation of
drive.
3. Eject Button
4. Emergency Eject Hole
1. USB Connector (mini)
This connector is used to connect to the USB
2.0 cable.
Location and function of controls
Removing the USB converter cable (For Windows)
The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by
performing the following operation.
1. Stop the application software being currently used.
2. Click the icon “ ” of the taskbar located on your screen’s bottom right side.
3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.
4. Click “Ok” and then remove the USB converter cable.
1 2 3 4
This following is the general figure of the design of the drive.
The drive’s appearance and specifications may change without prior notice.
Front
Rear
1
NOTE
Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup.
The removing procedure varies depending on your OS.
Features
• Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.
• Buffer Under Run error protection technology
• Emergency eject support
• Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R
DL, DVD-RAM and BD-R (SL/DL,LTH)/RE (SL/DL) drive functions into
one drive.
• Supports BD 3D Movie Play.
• PC USB powered, no AC adapter needed.
• Supports LightScribe Direct Label Printing Technology. - *Optional.
*You can use a variety of Drive
System meeting the following requirements is needed in order to use USB
2.0 operation with this drive.
•Computer that is equipped with a USB 2.0 – compliant USB connector or PCI
adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller
Interface) driver software 1) has been installed.
1) The USB 2.0 EHCI driver software is supplied with currently available PCI
adapter cards that conform to USB 2.0. Further, Microsoft has released the USB
2.0 EHCI driver software for Windows XP, therefore it is also possible to use this
driver software with Windows XP SP3.
If you want to know in detail, please contact your USB 2.0 adapter dealer or
consult your PC manufacturer, or consult the Microsoft Corporation Web site.
System Environment
Computer
This unit can be operated in the system environment explained here.
* Compatibility problem in write/read function may occur with some media depending on the media
manufacturing quality.
* To achieve maximum Record & Write speed your system may require data to be copied first to the
computer’s hard drive rather than directly from another source disc or drive.
Blu-ray Disc movie playback
CPU: Following CPU recommended for playing Blu-ray Disc
-Intel: E6400 or higher
Graphic Card: card with following GPU (Graphic Processing Unit) recommended.
-nVidia: GeForce 7600GT or higher/ GeForce 8400 or higher
-ATI: ATI Radeon HD 2400 or higher
Graphic Card Driver shall meet AACS compliance criteria.
Please consult your graphic card vendor for proper driver solution.
Specifications
• CPU :
Pentium D 3.2 GHz or higher (Recommended Core 2
Duo P8600 2.4 GHz or higher.)
• O/S : Windows XP (Home / Professional / Media Center
Edition) with SP3/ Windows Vista (X86, X64)/
Windows 7
• RAM : 1 GB or more
•
HDD : 30 GB or more of available space (60 GB for Blu-ray
Disc authoring)
USB 2.0 port
BD-R : LG, Sony, Panasonic, Mitsubishi Kagaku Media,
Verbatim
BD-RE : Mitsubishi Kagaku Media, Maxell, Sony,
Panasonic, Verbatim
DVD-R : Mitsubishi Kagaku Media, Verbatim
DVD-RW : JVC, Mitsubishi Kagaku Media
DVD+R : Mitsubishi Kagaku Media, Verbatim
DVD+RW : Mitsubishi Kagaku Media, Verbatim
DVD±R DL : Mitsubishi Kagaku Media, Verbatim
DVD-RAM : Maxell
CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Taiyo
Yuden, TDK
CD-RW : LG, Mitsubishi Kagaku Media, Verbatim
System
requirements
Interface
Recommended
media manufacturer
âť‹
The drive’s appearance and specifications may change without prior notice
.
- The maximum data transfer rate varies according to the performance
capabilities of the PC.
- For the sake of periodic improvements, specifications and appearance are
subject to change without notice.
- We have taken all possible measures to assure the quality of our products,
but we cannot be responsible for the consequences if defect occurs.
Software
Install the appropriate CD Recording Authoring Software before using this unit.
* Please uninstall any previous CD burning software you may have loaded on
your PC in order to prevent possible compatibility issues.
Once you have installed the application software, you may (if you wish) begin to
reinstall previous software, taking note for errors. We recommend using the drive
with the latest software as some problems encountered when using the drive can
be solved by updating the software.
We recommend to use USBFast Software in Software Installation disc for better
performance.
Please visit www.lgservice.com and install the program,
“LG ODD Online F/W update.” By using the program,
you can automatically check the latest information about FirmWares and
update the FirmWare.
Worldwide support ; http://www.LGservice.com
Worldwide corporate site : http://www.LG.com
Supported Discs BD-ROM (
Single/Dual), BD-R
(
Single/Dual/LTH),
BD-RE (Single/Dual), DVD-ROM(Single/Dual),
DVD-RW, DVD-R, DVD+RW, DVD+R, DVD+R
Double layer, DVD-R Dual layer, DVD- RAM,
CD-Digital Audio & CD-Extra, CD-Plus, CD-ROM,
CD-ROM XA-Ready, CD-I FMV, CD-TEXT,
CD-Bridge, CD-R, CD-RW, Photo-CD (Single &
Multi-Session), Video CD, DVD-VIDEO, BD-MV
Dimensions (WxHxD) 156 x 21 x 165 mm
Weight About 380g
Interface USB 2.0
Read/Write Speed
Write : BD-R SL: 2x, 4x, 6x
BD-R DL: 2x, 4x, 6x
BD-R LTH: 2x, 4x, 6x
BD-RE (SL/DL): 2x/2x
DVD-R (SL/DL): 2x, 4x, 8x/2x, 4x, 6x
DVD+R (SL/DL): 2.4x, 4x, 8x/2.4x, 4x, 6x
DVD-RW: 1x, 2x, 4x, 6x
DVD+RW: 2.4x, 3.3x , 4x, 8x
DVD-RAM: 2x, 3x, 5x (Ver.2.2)
CD-R: 10x, 16x, 24x
CD-RW: 4x, 10x, 16x, 24x
Read : BD-ROM (SL/DL): 6x/6x max.
BD-R (SL/DL): 6x/6x max.
BD-R LTH: 6x max.
BD-RE (SL/DL): 6x/6x max.
DVD-ROM: 8x max.
DVD-R (SL/DL): 8x/8x max.
DVD+R (SL/DL): 8x/8x max.
DVD-RW: 8x max.
DVD+RW: 8x max.
DVD-RAM (Ver.2.2): 5x max.
CD-R/RW/ROM: 24x max.
CD-DA (Ripping/Audio Play): 24x/10x max.
Average Access BD-ROM : 200 ms typ. (Typical)
Time (
1/3Stroke
)
DVD-ROM : 160 ms typ. (Typical)
DVD-RAM (ver. 2.2) : 180 ms typ. (Typical)
CD-ROM : 160 ms typ. (Typical)
Buffer capacity 4 MB
MTBF 60,000 Power On Hours (Duty Cycle 10 %)
Power Requirement 5 V DC
Operating Environment
Temperature 5 °C to 40 °C
Humidity 15 % to 85 %
Storage Environment
Temperature -30 °C to 60 °C
Humidity 10 % to 90 % RH
Item Quantity
- Slim Portable Blu-ray Writer 1
- USB 2.0 cable (Y type) 1
- Software Installation disc 1
- Quick Guide for Drive 1
Quick Set-up Guide
Slim Portable Blu-ray Writer
BP06
To install of your product, please read this guide manual carefully and completely.
P/NO. MFL40014155 Ver. A
Package Items
Cautions
BP06LU11 BP06NU11
Light Scribe X


Produktspezifikationen

Marke: LG
Kategorie: Nicht kategorisiert
Modell: E-BP06LU10

Brauchst du Hilfe?

Wenn Sie Hilfe mit LG E-BP06LU10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert LG

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-