Lexicon PCM81 Bedienungsanleitung
Lexicon
Effektmaschine
PCM81
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lexicon PCM81 (2 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
PCM 81 Quick Reference Guide
Basic Operation
The PCM 81 has 5 basic modes of operation, selected by pressing: Program Banks, Register Banks, Edit, Control or Tempo
Program Banks
and Register Banks
Press toProgram Banks
cycle through 6 banks of 50
presets. Press Register
Banks to access an internal
bank of 50 registers (or
PCMCIA card banks) where
you can store modied ver-
sions of the factory-loaded
presets.
Each set of PCM 81 controls
is organized into a matrix of
as many as 10 rows and 10
columns.
Simultaneously press Up
and to return to 0.0.Down ←
XXXXXXX XXXXXXXXX✱
3.6 XXXXXXXXXXXXXXXXX
→
↑
↓
SELECT moves you
horizontally across
the matrix.
Your current matrix location is shown in the
lower left of the display. A , an or a P R C
preceding the number indicates you are in a
P R Crogram, egister or ard Bank. If there is no
number shown here, you are in mode.Go
(See .)Edit
Up Down and
move you
vertically
through the
rows of the
matrix.
In , or Edit Control Tempo mode, a ✱
indicates the presence of multiple param-
eters within a single matrix location. Press
Load/✱ to cycle through all of the param-
eters; simultaneously press withLoad/✱
either or to backstep.Up Down
Edit
Press to access allEdit
available parameters for the
currently running eect. Turn
ADJUST to alter the value of
any displayed parameter.
Control
Press Control to access sys-
tem parameters, MIDI con-
trols, and global control of
parameters such as Mix,
Tempo, and Bypass type.
Tempo
Press Tempo to set tempo-
related values that aect the
delay time and LFO rate pa-
rameters of the currently
running eect.
In , or Edit Control Tempo mode, ADJUST scrolls
through the range of available settings for the displayed
control . In Program Banks and Register Banks mode,
ADJUST is patched to one or more eect parameters.
To set PCM 81 tempo rate,
press Tempo. Use SELECT
and Up and Down to locate
matrix position 0.0. Turn AD-
JUST to select any Tempo
Rate from 40-400 BPM.
Any PCM 81 delay param-
eter (as many as 10 in some
eects) and any time-based
modulator can be individu-
ally assigned an absolute
time or tempo value.
You can set delay times in
milliseconds, or in a ratio of
echoes/beats which are
linked to tempo. When you
change tempo, the delay
times will change to main-
tain the same rhythm at the
new tempo.
Note: You can set and display delay values in units of time, or
with tempo values. Whenever a delay value is displayed in Edit
mode, press Up and Tempo simultaneously to toggle these two
options.
The PCM 81 oers an exten-
sive set of informative dis-
play messages which can be
activated from the front
panel. If you want to know
more about the function of a
particular button —without
actually executing any ac-
tion — press and hold the
button down. While you are
holding down the button, an
explanatory message will
appear on the display.
Or, press twice inTap
rhythm to establish the
tempo rate you want. Tap is
always active, allowing you
to change tempo on the y.
Tempo Info
Simultaneously press the
Banks button with either Up
or to backstepDown
through the banks.
Turn SELECT to view all of
the eects in the selected
bank. A ✱ in front of an eect
name indicates that the ef-
fect is not loaded. Hold down
either Banks button to see
the name of the currently
running eect.
Press to load anyLoad/✱
displayed eect.
ADJUST acts as a soft knob
for adjustment of one or more
patched eect parameters.
Lexicon Part No. 070-12615
Copyright © 1998 Lexicon Inc. All rights reserved.
3 Oak Park • Bedford MA 01730-1441 • Tel: (781) 280-0300 • Fax: (781)280-0490
Press . The currentStore
program name will appear
with a ashing cursor over
the first letter of the name.
Press Load/✱ to display the
name currently assigned to
the ADJUST knob patch.
Use the same procedure for
entering a new name.
Press twice toLoad/✱
move the ✱ to the Register
ID number in the lower left
corner of the display. Use
ADJUST or SELECT to
choose the register where
you want the eect saved.
When the display shows the
register number you want,
press Store. Press Store in
response to the "Are you
sure?" message to save your
new eect to the displayed
register location.
Note: The PCM 81 will not perform a store instruction if the
Memory Protection option is on. To turn Memory Protection o,
press Control. Use Up and Down and SELECT to locate matrix
position . Turn ADJUST to display .1.5 O
In addition to these easy plug and play techniques, the PCM 81 provides extensive
system control via front panel patching or MIDI. For complete details on these and other
features, read the PCM 81 Owner's Manual.
PCM 81 Quick Reference Guide
Turn ADJUST to select a new
character. Press Up or Down
to select a new type of char-
acter (upper or lower case,
numeric, symbolic, or blank).
Turn SELECT to move the
cursor to a new character.
Store
Audition the Programs
The PCM 81 offers two levels of editing control: Go mode and Pro mode.
Turn SELECT to view the
available parameters.
Go mode gives you access to a specic set of as many as 10
parameters for each of the 300 presets. We have designed
each set of parameters to allow you to make changes to the
eect without losing the character of the sound.
In mode, press toGo Edit
access the most useful pre-
set parameters for the cur-
rently running eect.
Pro mode gives you access to the full eect edit matrix
whenever you press . The edit matrix contains all eectEdit
parameters, as well as Patching and Modulation controls.
Turn ADJUST to change the
value of any displayed pa-
rameter.
The PCM 81 is shipped in Go mode. To change the Edit mode,
press Control, use SELECT and and Up Down to locate
matrix position 1.0. Turn ADJUST to select Go Pro or .
Edit
Press Bypass to mute the
input signal. A Bypass Mode
parameter at Control mode
1.3 allows you to select input
muting, output muting, input
and output muting, or bypass
as alternatives. You can also
assign the bypass function to
an external controller.
When you turn ADJUST, or
perform any other param-
eter edits, the front panel
Compare light will go on to
indicate that the program
has been modied since it
was last stored. Press Com-
pare to hear the unedited
version. Press again to re-
turn to your edited program.
Bypass
Compare
Each preset has one or more
parameters patched to the
ADJUST knob.
Turn ADJUST to display the
name and the current value
of the patch.
Continue turning ADJUST to
change the value of the patch
along its entire range. The
screen will return to its nor-
mal display when you stop
turning ADJUST.
P0
0.0-1.9 Multi Eects
2.0-3.5 Modulation
Eects
3.6-4.9 Special Eects
Press Program Banks to cycle through six banks of 50 presets.
Turn SELECT to view all of the presets in numerical order.
Press Load/✱ to load any displayed eect.
P5
0.0-0.9 Sci-Fi FX
1.0-1.9 Pitch & Delay
2.0-2.9 Pitch
Sequences
3.0-3.7 Pads & Drones
3.8-3.9 Utility Programs
4.0-4.9 Pitch Correct
P4
0.0-0.9 Vocal Shift
1.0-1.9 Vocal Harmony
2.0-2.9 Guitar Magic
3.0-3.9 Instrument Shift
& Harmony
4.0-4.9 Percussion &
Tempo
P3
0.0-2.8 Reverb Eects
2.9-3.9 Processed
Reverb
Eects
4.0-4.9 Remix Eects
P2
0.0-1.0 EQ Eects
1.1-2..4 Spatial Effects
2.5-4.0 Gain Eects
4.1-4.9 Resonant Chord
Eects
P1
0.0-3.6 Rhythmic Echo
and Delay
Eects
3.7-4.9 Ambience
Eects
Produktspezifikationen
| Marke: | Lexicon |
| Kategorie: | Effektmaschine |
| Modell: | PCM81 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Lexicon PCM81 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine Lexicon
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine König
- Effektmaschine Pyle
- Effektmaschine Antari
- Effektmaschine BeamZ
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine HQ Power
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Chauvet
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine IGS Audio
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
8 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
25 September 2024