Leitz iLAM Home Office A4 Bedienungsanleitung

Leitz Laminator iLAM Home Office A4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Leitz iLAM Home Office A4 (60 Seiten) in der Kategorie Laminator. Dieser Bedienungsanleitung war für 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/60

LEIT Z iL A M

LAMINATOR

HOME OFFICE A 4/A3

OFFICE A 4/A3

A++

HU 46 AR 56

Inst ruction s for use

EN 1

RO 48

DE 3

GR 51

FR 5

TR 53

IT 7ES 10

OFF

80 m ic

125 mic

Introduction

This Leitz product is intended to be used for

laminating paper or similar materials. The

product should only be used in household or

similar environments, such as in ofces and

shops. The product should not be used for

commercial or industrial purposes, in

locations with the presence of a corrosive or

explosive atmosphere or for medical

purposes. The product may only be used

according to the instructions as described in

this manual. All use other than described in

this manual is seen as unintended use.

For your safety

WARNING! Read all safety warnings

and all instructions.

• Please take the time and read the general

safety instructions. You can nd the general

safety instructions in a separate booklet.

This booklet is included.

• Always ensure good aeration while

laminating (e. g. open a window).

• Always unplug the device when not in use.

• Do not place anything on top of the device

and do not insert anything into the venting

slots.

• Never laminate with only one side of a

laminating pouch.

• Never attempt to pull out the pouch before

the laminating process has nished.

• Always unplug and let the device cool

down before cleaning, moving or storing it.

When carrying the laminator, always hold it

by the recessed grips on both sides.

Setting up and switching on the

laminator ( and )

• Set the laminator up on a stable surface

(e.g. table) close to a mains outlet .

Ensure there is sufcient space behind the

unit so the laminated item is not blocked

and can easily be removed.

• Connect mains cord with mains socket.

• Put the ON/OFF switch in the ON

position .

• Put the temperature switch in the “I”

position (80 mic) for pouches rated 75-100

µm. Put the temperature switch in the “II”

position (125 mic) for pouches rated 125

µm. Put the temperature switch in the “0”

position (cold) for cold seal pouches.

Inserting the document into the

pouch 

• Insert the document into the laminating

pouch. Align it to the sealed edge as much

as possible and maintain even margins left

and right.

Pouches that are too large can be trimmed

to size after lamination.

Laminating 4

• When the POWER/READY LED indicator

lights green, insert the pouch with the

sealed edge rst until it gets pulled in.

The laminated document automatically

exits at the output side.

Letting the laminated document

cool down 5

• Remove the laminated document and leave

it on a at surface for one minute to cool

down.

• When you have no further documents to

laminate, switch off the laminator.

Clearing a jammed pouch 6

Jamming can occur when laminating

unsuitable materials.

CAUTION: To prevent any damages to the

laminator, the pouch must be removed before

switching off the unit.

• Move the release lever to the right and pull

out the pouch immediately.

• Clean the rollers after any pouch jam as

described in section “Maintenance and

care”.

Produktspezifikationen

Marke:	Leitz
Kategorie:	Laminator
Modell:	iLAM Home Office A4
Breite:	370 mm
Tiefe:	128 mm
Gewicht:	1370 g
Produktfarbe:	Grey, White
Höhe:	76 mm
AC Eingangsspannung:	230 V
AC Eingangsfrequenz:	50 Hz
Eingebautes Display:	Nein
Zertifizierung:	GS / TUV / CE
Stromverbrauch (Standardbetrieb):	285 W
Typ:	Heisslaminator
Gehäusematerial:	Acrylonitrile butadiene styrene (ABS), Plastic
Temperatur (max):	130 °C
Anzeigelicht:	Ja
Aufwärmzeit:	1.5 min
Format:	A4
Vorwärmzeit:	3 min
Laminierungsgeschwindigkeit:	310 mm/min
Maximale Dicke des Dokumentes:	0.6 mm
Maximale Laminierungbreite:	230 mm
Mindeststärke der Beutel:	80 µm
Maximale Folienstärke:	125 µm
Laminiersystem:	Beutel
Laminierzeit:	60 s
Anzahl der Rollen:	2