Kreg Concealed Hinge Jig Bedienungsanleitung

Kreg boormachine Concealed Hinge Jig

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kreg Concealed Hinge Jig (54 Seiten) in der Kategorie boormachine. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/54
ITEM No. KHI-PULL-INT
NK9068
Version 1 - 12/2016
Concealed Hinge Jig
Owners Manual | Benutzerhandbuch | Guide d’utilisation |
Manual del propietario | Brugervejledning | Omistajan käyttöopas |
Manuale di istruzioni | Gebruikershandleiding |
Brukerveiledning|Instrukcjaużytkownika|ManualdoUtilizador|
Руководствопользователя|Ägarhandbok
Safety
1
Follow your drill manufacturer’s instructions and safety guidelines.
Always wear eye protection.
The drill bit is sharp. Keep the cap on the bit until you are ready to drill. Wear gloves when handling an
unprotected bit.
Use two clamps to secure the jig to the workpiece. Do not attempt to hold it in place by hand.
Keep your body and hands away from sharp bit edges and moving parts.
Keeps hands and ngers away from the back face of the workpiece when drilling.
Parts
C
A
B
D
E
Items Included:
(A) Base
(B) Drill Guide
(C) 35mm Concealed Hinge Bit
(D) Stop Collar
(E) Hex Wrench
(F) Cap
Tools Required:
Electric drill
116" [1.5mm] drill bit
Clamps
F
Assembly 2
Turn the Drill Guide counterclockwise and
remove it from the Base. Insert the 35mm
Concealed Hinge Bit into the Drill Guide and
slide the Stop Collar onto the bit shaft until it
is seated on the shaft shoulder. Tighten the
set screw with the Hex Wrench. Set the Drill
Guide/35mm Bit aside.
Consult your hinge manufacturer’s
instructions for the distance from the edge of
the door to the edge of the 35mm hinge-cup
hole. Using a at-blade screwdriver, turn the
Edge Indexers so the appropriate dimension
aligns with the line on the Base. The edge-
of-door to edge-of-hole dimension usually is
given in millimetres. For a dimension given as
a fraction of an inch, see the cross-reference
table directional.
Stop Collar
Edge indexer
WARNING The drill bit is sharp. Keep the cap on
the bit until you are ready to drill. Wear gloves when
handling an unprotected bit.
!
ATTENTION The drill bit included with this jig is
a custom length with a shoulder for accurately
positioning the Stop Collar. Use only a Kreg 35mm
Concealed Hinge Bit as a replacement.
!
Dimension given
as fraction of an inch
Set Edge Indexers
to millimetre
dimension
1/8" 3mm
5/32" 4mm
3/16" 5mm
1/4" 6mm
Shaft shoulder

Produktspezifikationen

Marke: Kreg
Kategorie: boormachine
Modell: Concealed Hinge Jig

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kreg Concealed Hinge Jig benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung boormachine Kreg

Bedienungsanleitung boormachine

Neueste Bedienungsanleitung für -Kategorien-