Kramer WP-211T Bedienungsanleitung

Kramer Router WP-211T

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kramer WP-211T (4 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
WP-211T Quick Start
P/N:
2900- 301088QS
Rev:
4
Scan for full manual
WP- Quick Start Guide 211T
This guide helps you install and use your WP-211T for the first time.
Go to www.kramerav.com/downloads/WP-211T to download the latest user manual and check if rmware
upgrades are available.
Step 1: Check what’s in the box
1 Power adapter and cord
1 Quick start guide
Installation accessories
Step 2: Get to know your - WP 211T
#
Feature
Function
1
INPUT 1
HDMI Connector
Connect to an HDMI source to route to HDBT OUT.
Button
Press momentarily to manually select HDMI 1 (button lights orange).
2
Operation Mode
DIP-switches
By-default the DIP-switches are both set to OFF (left).
Controlling via the INPUT buttons overrides all DIP-switch settings and automatic
switching until the manually selected source disconnects, becomes inactive or WP-211T
is powered o.
DIP-switch 1
OFF (left) - Last connected mode.
ON (right) - Priority mode according to DIP-switch 2 settings.
DIP-Switch 2
OFF (left) - INPUT 1 is the default priority.
ON (right) INPUT 2 is the default priority.
WP-211T DIP-switches are located behind the faceplate and should be set during installation, before placing the
faceplate. Pressing an input button manually selects that input, independent of the DIP-switch settings.
3
INPUT 2
HDMI Connector ™
Connect to an HDMI Source to route to HDBT OUT.
Button
Press momentarily to manually select HDMI 2 (button lights orange).
4
Grounding Screw
Connect to the common ground (optional) to prevent static electricity from impacting the
performance of the unit.
# Feature Function
5
GND 5V DC 2-pin Terminal
Block Connector
Connect to the supplied power adapter. Not needed on the if there is a PoE WP-211T
provider over HDBaseT.
6
HDBT OUT RJ-45 Connector
Connect to an HDBaseT receiver (for example, TP-580R).
Step 3: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your . For best results, we recommend that you WP-211T
always use Kramer high-performance cables to connect AV equipment to the . WP-211T
Grounding the -211T WP
#
Component Description
1
M3X6 screw
2
1/8" Toothed Lock
Washer
3
M3 Ring Tongue Terminal
To ground the - : WP 211T
1. Connect the ring tongue terminal to the building grounding point wire (it is recommended to use a green-yellow
AWG#18 (0.82mm) wire, crimped with a proper hand-tool).
2. Insert the M3x6 screw through the toothed lock washers and the tongue terminal in the order shown above.
3. Insert the M3x6 screw (with the two toothed lock washers and ring tongue terminal) into the grounding screw hole and
tighten the screw.
Step 4: Install - WP 211T
After connecting the ports, insert the device into the in-wall box and connect the parts as shown in the illustrations below:
EU/UK Version
US-D Version
DECORAÂŽ design frames are included in US-D models.
We recommend that you use any of the following standard 1 Gang in-wall junction boxes (or their equivalent):
• : 1 Gang US electrical junction boxes. US-D
• : 1 Gang in-wall junction box, with a cut-hole diameter of 68mm and depth that can t in both the device and the EU
connected cables (DIN 49073).
• : 1 Gang in-wall junction box, 75x75mm (W, H), and depth that can t in both the device and the connected cables UK
(BS 4662).
Step 5: Connect the power
If the device is not powered via HDBT PoE, connect the 5V DC power adapter to the and plug the adapter into the WP- 211T
mains.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the Kramer Electronics power supply that is provided with the unit.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See for updated safety information. www.KramerAV.com


Produktspezifikationen

Marke: Kramer
Kategorie: Router
Modell: WP-211T

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kramer WP-211T benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Router Kramer

Bedienungsanleitung Router

Neueste Bedienungsanleitung fĂźr -Kategorien-