Kodak RODPJS75 Bedienungsanleitung

Kodak Videostrahl RODPJS75

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Kodak RODPJS75 (28 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war fĂĽr 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
KODAK Pocket Portable Projector
User Manual
3"H | 3"W | 0.8"D (8 cm | 8 cm | 2 cm)
Please read all directions before using the product and retain this guide for reference.
2
INTRODUCTION
BOX CONTENTS
SAFETY PRECAUTIONS
FEATURES
SETUP
OPERATION
CARE AND MAINTENANCE
DISPOSAL
SPECIFICATIONS
CUSTOMER SERVICE
WARRANTY
CONTENTS
1
2
3
4
5
6
7
8
9
10
11
3
3
3-4
4-5
6-10
10-11
12
12
12-13
13
13-15
3
Thank you for purchasing the KODAK Pocket Portable Projector. This User Guide is intended to provide
you with guidelines to ensure that operation of this product is safe and does not pose risk to the user.
Any use that does not conform to the guidelines described in this User Guide may void the limited
warranty.
Please read all directions before using the product and retain this guide for reference. This product is
intended for household use only.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.
See warranty for details.
1. INTRODUCTION
KODAK Pocket Portable Projector
HDMI® Cable
USB Cable
User Guide
2. BOX CONTENTS
When Using the Projector
• Refer to this user guide and take note of all safety precautions before using your projector.
• Do not place the projector on uneven or unstable surfaces.
• Do not use the projector in any place where it may come into contact with smoke. The residue
from smoke may cause build-up on critical parts of the projector, resulting in damage or
decreased performance.
• Do not use damaged power cords, accessories, and other parts with your projector.
• Keep all parts out of reach of children.
• Do not block or place anything near the projector’s ventilation holes. Doing so may cause internal
heat build-up that can result in degraded picture quality and damage to the projector.
• Always ensure that the operating voltage of your projector matches the voltage of your
power source.
• Do not store your projector in high temperatures, in direct sunlight, or any place where it may
become wet or damp.
• Do not handle this product with wet or damp hands.
• Do not reach for the unit if it has fallen into water. Always unplug it irst.
• Do not use this product in a place where it may fall.
• When using for the irst time, ensure that the projector is plugged into a grounded wall socket.
• Never attempt to short-circuit the battery.
• Discontinue use if leakage is found.
3. SAFETY PRECAUTIONS
4
When Servicing or Replacing Parts
• Never attempt to disassemble this product. There are no user serviceable parts.
• Do not attempt to remove or disassemble the battery. This will increase the risk of ire or
chemical burns.
• Always take care that the replacement battery is the correct type. Risk of explosion.
• Only use the parts provided by the manufacturer.
TOP VIEW
1. Control Panel Buttons
Use the control panel buttons to navigate the on screen menu.
These buttons are also used to control speciic projector
settings as shown below.
A. Back
B. Conirm / Play / Pause
C. Right / Fast-Forward / Volume+
D. Left / Rewind / Volume–
E. Volume
F. Power Indicator
2. Power Indicator
A. The projector’s current charge is shown by the 4 lights on the side of the control panel. When the
projector is powered on, the lights will lash.
B. Each light represents 25% charge, 1 light indicating low charge, and 4 lights indicating full charge.
C. When charging, the next power level will blink on and o.
D. To view the current charge, press the power button once.
FRONT VIEW
1. Lens
Projects the video or image iles from your input device.
NOTE: Never touch the lens using your hands or any sharp object.
2. Speaker
Plays back the audio from the currently playing video.
REAR VIEW
1. Audio Output
This port allows you to connect an external speaker
or headphones to the projector.
2. USB Input/Power Out
This port allows you to connect a USB lash drive or other external device to the projector.It also
provides up to 5V/2A of voltage and current, allowing you to use the projector to charge a
mobile device.
4. FEATURES
A
B
D C
E
F
12
1 2 3 4
5
3. HDMI® Input
This port is used to connect the HDMI® (High-Deinition Multimedia Interface) connector. It is
compatible with HD DVD, Blu-Ray, and other protected content playback.
NOTE: If the USB and/or microSD™ inputs are used at the same time as the HDMI®, the HDMI® will
take priority.
4. DC Input
This port is used to connect the power adapter (not included). It is used both to provide direct power to
the projector and to charge the internal battery.
NOTE: the power adapter may become warm or hot while in use. Never cover or attempt to touch the
adapter while it is connected to a power source.
RIGHT SIDE
1. Power Button
Press and hold this button for 5 seconds to turn the
projector on or o. Press this button once to view the current charge.
2. Focus Wheel
Turn the focus wheel to adjust the image focus of the projector.
LEFT SIDE
1. MicroSD™ Slot
This slot allows you to insert a microSD™ card, giving
you access to your iles directly from the projector.
2. Air Outlet Vent
When the projector is in use, warm air will exit from this vent.
NOTE: Always take care that the air vents are never blocked by paper, clothing, or any other
obstruction. Blocking the vents may result in overheating of the projector.
BOTTOM VIEW
1. Air Inlet Vent
When the projector is in use, cool air will enter this vent.
NOTE: Always take care that the air vents are never blocked
by paper, clothing, or any other obstruction. Blocking the
vents may result in overheating of the projector.
2. Tripod Dock
This dock allows the projector to be mounted onto a tripod.
3. Rating Label
The speciications of the projector can be found here.
4. Non-Slip Feet
These rubber feet provide additional traction to the projector,
allowing it to be more stable when on a surface.
12
1 2
1
2
4
3
8
E. Enable your Computer for External Displays
If your computer does not automatically recognize the projector, it means that you must irst enable
the use of external displays. Each computer is dierent and may require a dierent setup.
To set up Windows 7 for external displays, follow the instructions below.
a. Open the start menu and select the “Control Panel”.
b. Select “Appearance and Personalization”.
c. Under the “Display” section, select “Connect to an external display”.
d. Here you will be able to select your projector as an external display.
ab
d
c
14
customer service for details on obtaining warranty service:
USA: kodak@camarketing.com, 8445161539
International: kodakintl@camarketing.com, +18445161540
Shipping expenses to the Company’s Return Facility are not covered by this warranty, and must be paid
by the consumer. The consumer likewise bears all risk of loss or further damage to the Product until
delivery to said facility.
EXCLUSIONS AND LIMITATIONS The Company warrants the Product against defects in materials
and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase by
the original end-user purchaser (“Warranty Period”). If a hardware defect arises and a valid claim is
received within the Warranty Period, the Company, at its sole option and to the extent permitted by
law, will either (1) repair the Product defect at no charge, using new or refurbished replacement parts,
(2) exchange the Product with a Product that is new or which has been manufactured from new or
serviceable used parts and is at least functionally equivalent to the original device, or (3) refund the
purchase price of the Product.
A replacement Product or part thereof shall enjoy the warranty of the original Product for the remainder
of the Warranty Period, or ninety (90) days from the date of replacement or repair, whichever provides
you longer protection. When a Product or part is exchanged, any replacement item becomes your
property, while the replaced item becomes the Company’s property. Refunds can only be given if the
original Product is returned.
This Warranty does not apply to:
(a) Any non-KODAK Pocket Portable Projector product, hardware or software, even if packaged or sold
with the Product;
(b) Damage caused by use with non-KODAK Pocket Portable Projector products;
(c) Damage caused by accident, abuse, misuse, lood, ire, earthquake, or other external causes;
(d) Damage caused by operating the Product outside the permitted or intended uses described by the
Company;
(e) Damage caused by third party services;
(f) A Product or part that has been modiied to alter functionality or capability without the written
permission of the Company;
(g) Consumable parts, such as batteries, fuses and bulbs;
(h) Cosmetic damage; or
(i) If any KODAK Pocket Portable Projector serial number has been removed or defaced.
This Warranty is valid only in the country where the consumer purchased the Product, and only applies
to Products purchased and serviced in that country.
The Company does not warrant that the operation of the Product will be uninterrupted or error-free.
The Company is not responsible for damage arising from your failure to follow instructions relating to
its use.
NOTWITHSTANDING ANYTHING TO THE CONTRARY AND TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE COMPANY PROVIDES THE PRODUCT “ASIS” AND “ASAVAILABLE” FOR YOUR
CONVENIENCE AND THE COMPANY AND ITS LICENSORS AND SUPPLIERS EXPRESSLY DISCLAIM


Produktspezifikationen

Marke: Kodak
Kategorie: Videostrahl
Modell: RODPJS75
Marktpositionierung: Tragbar
Eingebaute Lautsprecher: Ja
WLAN: Nein
Akku-/Batteriekapazität: 2500 mAh
Akku-/Batteriebetriebsdauer: 2 h
Breite: 80 mm
Tiefe: 80 mm
Gewicht: 140 g
Mitgelieferte Kabel: HDMI, USB
Produkttyp: Short-Throw-Projektor
Produktfarbe: Gold, White
Höhe: 20 mm
RMS-Leistung: 1 W
Anzahl eingebauter Lautsprecher: 1
Kopfhörerausgänge: 1
Anzahl USB 2.0 AnschlĂĽsse: 1
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 20 - 90 %
Paketgewicht: 280 g
Fernbedienung enthalten: Nein
Zertifizierung: FCC, IC, CP65, IEC60065
Stromverbrauch (Standardbetrieb): 4 W
Natives Seitenverhältnis: 16:9
Kontrastverhältnis: 1300:1
Anzahl HDMI-AnschlĂĽsse: 1
Geräuschpegel: 30 dB
3D: Nein
Smart-TV: Nein
DVI Anschluss: Nein
Full-HD: Nein
Kompatible Speicherkarten: MicroSD (TransFlash)
Integrierter Kartenleser: Ja
Projektorhelligkeit: 75 ANSI Lumen
Projektionstechnologie: DLP
native Auflösung des Projektors: nHD (640x360)
Anzahl der Farben: 16,78 Millionen Farben
Projektionsflächenkapazität: 5 - 80 "
Projektionsabstand: 0.2 - 3.8 m
Lebensdauer der Lichtquelle: 30000 h
Typ der Lichtquelle: LED
Brennweitenbereich: - mm
Unterstützte Seitenverhältnisse: 16:9
Offset: 100 %
Projektionsverhältnis: 2.2:1
Horizontale Synchronisation (min): 24.7 kHz
Horizontale Synchronisation (max): 74.6 kHz
Vertikale Synchronisation (min): 50 kHz
Vertikale Synchronisation (max): 60 kHz
Ethernet/LAN: Nein

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kodak RODPJS75 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Videostrahl Kodak

Bedienungsanleitung Videostrahl

Neueste Bedienungsanleitung fĂĽr -Kategorien-