Knog Bilby Bedienungsanleitung

Knog Zaklamp Bilby

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Knog Bilby (1 Seiten) in der Kategorie Zaklamp. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
BU TTON 1 BU TTON 2
EN
OPERATIONGET STARTED
WHEN LIGHT IS ON WHEN LIGHT IS OFF
CHARGING
ADJUSTABLE
HEADSTRAP
CHECKING BATTERY LEVEL LOCK
Turn On: Long press of button 1
Turn O: Press and hold both buttons
Bilby comes locked
The silicone strap adjusts with a toggle. Once
you’ve found your size you can set and forget
or adjust on the fly
The reading lights show the battery level. When Bilby is
turned o, quick press any button.
MODES
Short press of button 1 to scroll through modes. The
light will slowly dim to extend runtime, if you wish to
go back to full output of your chosen mode press the
mode button once.
Modes: Spot, Wide, Low, Red, Reading
BOOST MODES
Double click either button to activate boost mode,
the Bilby will power up to maximum.
Button 1 - Spot and low (240 Lm)
Button 2 - Spot and wide (400 Lm)
The light will slowly dim to extend runtime, to boost
to full output double click again.
BRIGHTNESS
Short press of button 2 to scroll through brightness
settings. Brightness: Max, High, Med, Low
TILT FUNCTION
Hold down the button 1 to tilt the light down.
Hold down the button 2 to tilt the light up.
LOW BATTERY
When the battery is low the light output with drop to
increase runtime.
MODEMAKER
The Bilby is compatible with the ModeMaker app to
allow customisation of the light modes. Open Mode -
Maker, plug the USB into your computer, drag and drop
the modes that you want and select upload.
CARE & MAINTENANCE
To clean: wipe with cloth, don’t use harsh
chemicals, air dry, don’ t sun dry.
WARRANTY
The light is guaranteed for 2 years against
manufacturing defects only.
See the website for more details KNOG.COM
reading lights / battery indicator
Lights will flash while
charging showing the battery
level it has charged to. Four
flashing LEDs indicate it is
fully charged.
If you accidentally press any button when the Bilby is
locked the red light will flash twice.
To lock/unlock: Hold both buttons for 3 seconds. White
light will flash twice to show that Bilby is unlocked. Red
light will flash twice to show that Bilby is locked.
Fully charge the Bilby before the first use.
Pop out the inner pod to access the USB.
Then charge in any USB charge port.
Charge time: 4 hr.
25%
50%
75%
100%
SETTINGS OUTPUT
(LUMEN)
RUNTIME
(HOURS)
Boost Right High 400 5
Boost Right Low 50 60
Boost Left High 9240
Boost Left Low 8035
Ambient Right High 200 14
Ambient Right Low 10525
Ambient Left High 48 22
Ambient Left Low 7 98
Spot High 200 14
Spot Low 10525
Red High 7 32
Red Low 2 103
Reading High 10 17
Reading Low 2 75
OPERATION BUTTON 1 BUTTON 2
Short Press Change Mode Change
Brightness
Long Press Tilt Beam
Down
Tilt Beam
Up
Double Press Boost Mode 1 Boost Mode 2
Press & Hold
both buttons Turn O
OPERATION BUTTON 1 BUTTON 2
Short Press Battery
Charge Status
Battery
Charge Status
Long Press Turn Light
On -
Double Press - -
Press & Hold
both buttons Lock/Unlock Light
To unlock hold both buttons for 3 seconds
QUICK START GUIDE
B I L BY
1. LOW 2. SPOT 3. WIDE 4. RED 5. READING
Pop out left
side of the
light first
(to avoid
damaging
the usb on
right side).
USB
1234
5

Produktspezifikationen

Marke: Knog
Kategorie: Zaklamp
Modell: Bilby

Brauchst du Hilfe?

Wenn Sie Hilfe mit Knog Bilby benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Zaklamp Knog

Bedienungsanleitung Zaklamp

Neueste Bedienungsanleitung für -Kategorien-