Klipsch Icon SB1 1 Bedienungsanleitung

Klipsch Soundbar Icon SB1 1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Klipsch Icon SB1 1 (36 Seiten) in der Kategorie Soundbar. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/36

KLIPSCH ICON™ SB 1

Owner's Manual

Important Safety InStrUCtIonS!

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliﬁers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wider blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories speciﬁed by the manufacturer.

12. USE ONLY with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualiﬁed service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15. DO NOT expose this apparatus to dripping or splashing and ensure that no objects ﬁlled with

liquids, such as vases, are placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord

plug from the AC receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

The exclamation point, within an equilateral triangle, is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

The lightning ﬂash with arrowhead symbol within an equilateral triangle, is intended to

alert the user to the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufﬁcient magnitude to constitute a risk of electrical shock

to persons.

WARNING: To reduce the risk of ﬁre or electrical shock, do not expose this apparatus to rain or

moisture.

WARNING: No naked ﬂame sources – such as candles – should be placed on the product.

BAT TERY INFORMATION:

WarnInG: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat

such as sunshine, ﬁre or the like.

WarnInG: Risk of leakage. Only use the speciﬁed type of batteries. Never mix new and used

batteries.

Observe correct polarity. Remove batteries from products that are not in use for a long period of

time. Store batteries in a dry place.

WarnInG: Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

WarnInG: Do not place batteries in mouth or ingest. Keep out of reach of children and pets.

WarnInG: Do not recharge non-rechargeable batteries.

Please dispose of any used batteries properly, following any local regulations. Do not incinerate.

Place the equipment near a main power supply outlet and make sure that you can easily access the

power breaker switch.

WarnInG: This product is intended to be operated ONLY from the AC Voltages listed on the back

panel or included power supply of the product. Operation from other voltages other than those

indicated may cause irreversible damage to the product and void the products warranty. The use of

AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which

the product was not designed to operate. If the product is equipped with a detachable power cord,

use only the type provided with your product or by your local distributor and/or retailer. If you are

unsure of the correct operational voltage, please contact your local distributor and/or retailer.

fCC anD CanaDa emC CompLIanCe InformatIon:

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or tele-

vision reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

Approved under the veriﬁcation provision of FCC Part 15 as a Class B Digital Device.

Caution: Changes or modiﬁcations not expressly approved by the manufacturer could void

the user’s authority to operate this device.

Caution: To comply with the limits of the Class B digital device, pursuant to Part 15

of the FCC Rules, this device is to comply with Class B limits. All peripherals must be

shielded and grounded. Operation with non-certiﬁed peripherals or non-shielded cables

my result in interference to radio or reception.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

eU CompLIanCe InformatIon

Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/

EC; Conforms to European Union EMC Directive 2004/108/EC, Conforms to Eco-Design

Directive 2009/125/EC, Conforms to European Union Radio and Telecommunications

Terminal Equipment (R&TTE) Directive 1999/5/EC.

This product contains batteries that are covered under the 2006/66/EC European Direc-

tive, which cannot be disposed of with normal household waste. Please follow local

regulations.

Weee notICe

Note: This mark applies only to countries within the European Union (EU) and Norway.

This appliance is labeled in accordance with European Directive 2002/96/

EC concerning waste electrical and electronic equipment (WEEE). This label

indicates that this product should not be disposed of with household waste. It

should be deposited at an appropriate facility to enable recovery and recycling.

WIreLeSS tranSmItter CompLIanCe InformatIon

The term “IC:” before the radio certiﬁcation number only signiﬁes that Industry Canada

technical speciﬁcations were met.

Le terme «IC:» avant le numéro de certiﬁcation radio signiﬁe seulement que les spéciﬁ-

cations techniques d’Industrie Canada ont été respectées.

C a U t I o n

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

Produktspezifikationen

Marke:	Klipsch
Kategorie:	Soundbar
Modell:	Icon SB1 1
Mitgelieferte Kabel:	RCA
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
RMS-Leistung:	- W
Gleichstrom-Anschluss (DC):	Ja
Audio Kanäle:	- Kanäle
Frequenzbereich:	33 - 20000 Hz
Hochtönerdurchmesser (Imperial):	0.78 "
Anzahl der Hochtöner-Antriebe:	2
Subwoofer-Treiberdurchmesser (imperial):	10 "
Wandmontage:	Ja
Digital-Audio-Optical-In:	1
Gewicht Soundbar:	3400 g
Montageblöcke enthalten:	Ja
Subwoofer enthalten:	Ja
Hochtönerdurchmesser:	20 mm
Apple-Docking-Kompatibilität:	Nicht unterstützt
Tieftönergewicht:	11300 g
Subwoofer-Konnektivität:	Kabellos
Subwoofer Abmessungen (WxDxH):	229 x 457 x 368 mm
Treiberdurchmesser Mitteltöner:	76 mm
Anzahl der mid-range Antriebe:	4
Docking-Steckverbindertyp:	Nicht unterstützt
Soundbar Abmessungen (WxDxH):	1016 x 76 x 112 mm
Treiberdurchmesser Mitteltöner (imperial):	3 "