Kiloview RN01 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kiloview RN01 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
RN01 Chassis
Leading provide solution of IP-based video transmission
Quick Start Guide
Contents
â—¼ Chassis Installation
â—¼ Encoding application
â—¼ Decoding application
Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or electrical damage to the
device, please strictly follow the instructions of this guide to install and use it under the guidance of professionals. Incorrect electrical connections or physical
installation may cause permanent damage to the device and even threaten personal safety.
1. RN01 Installation
Align the device to the screw holes at the bottom of the chassis, and push in parallel, then tighten the double-
sided screws. Reverse the process for removal.
Note
âš« The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the
same chassis compatible with 1/2/3/4 channels and multi-interface, coding/decoding mixed solutions. The chassis en
has no centralize power supply, and each module needs to be powered separately for normal operation.
âš« Tally-green light indicates that the current video is in Preview state; red light: indicates that the current video is in :
Program state.
âš« LED indicator. Power: always white indicates that power is connected LINK white flashing indicates normal network ï¼›:
access Run: flashing white indicates normal work in progress. ï¼›
1.Align and push the encoding card in parallel
2.Tighten the left and right screws
LED indicator
Tally light
2. Application
2 Encod application.1 ing
2 Decod application .2 ing
3. Others
To prolong the device life please unplug the power and keep it properly if you do not use it for a long time.,
SDI Video source
LOOP
Switcher
Networ k
1 Power supply interface 2V
Monitor
Switcher
NDI
input


Produktspezifikationen

Marke: Kiloview
Kategorie: Nicht kategorisiert
Modell: RN01

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kiloview RN01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Kiloview

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-