Kenwood KS-1300HT Bedienungsanleitung

Kenwood Lautsprecher KS-1300HT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kenwood KS-1300HT (28 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/28

KS-1300HT

SPEAKER SYSTEM

INSTRUCTION MANUAL

SYSTEME DE ENCEINTE

MODE D'EMPLOI

LAUTSPRECHERSYSTEM

BEDIENUNGSANLEITUNG

LUIDSPREKERSYSTEEM

GEBRUIKSAANWIJZING

SISTEMA DIFFUSORI

ISTRUZIONI PER L'USO

SISTEMA DE ALTAVOCES

MANUAL DE INSTRUCCIONES

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL

ENGLISH

2 English

Introduction

Thank you for selecting our speakers as part of your high-fidelity system. We at Kenwood are confident that your choice will bring you

years of rich listening pleasure. Please take the time to read through this booklet carefully. It will help you to obtain the peak perfor-

mance for which the speakers were designed.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided be-

low.

Refer to these model and serial numbers whenever you call upon your Kenwood dealer for information or service on this product.

Model KS-1300HT is composed of the front speakers, center speaker and surround speakers.

KS-1300HT Serial number

IMPORTANT SAFETY INSTRUCTIONS

Caution: Read this item carefully to keep your safety.

1. Suffocation – After taking the unit out of the polyethylene bag,

be sure to dispose of the polyethylene bag out of the reach of

children. Otherwise, they may play with the bag, which could

cause hazard of su ocation.

2. Water and moisture – The appliance should not be used near

water - for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, etc.

3. Heat – Do not install the unit near a source of heat, such as ra-

diators, or under direct sunlight.

Installation

Position

Positioning For Optimal Surround So

ing For Optimal Surround So

ing For Optimal Surround Sound

und

undPositioning For Optimal Surround Sound

4. Modification – Do not attempt to open or modify the unit, for

this could cause  re hazard or malfunction.

5. Cleaning – Do not use volatile solvents such as alcohol, paint

thinner, gasoline, or benzine, etc. to clean the cabinet. Use a

clean dry cloth.

6. Abnormal smell – If an abnormal smell or smoke is detected,

immediately turn the power OFF and unplug the appliance from

the wall outlet. Contact your dealer or nearest service center.

Abou

out U

t U

t Usin

sin

sing Sp

g Sp

g Speak

eak

eakers

ers

ers Ne

Near

ar a

a T

V (

(

Fro

ront

nt sp

speak

eak

eaker

er,

, C

Cen

ente

ter s

r s

r spea

pea

peak

ker

er)

)

)About Using Speakers Near a TV (Front speaker, Center speaker)

This speaker include magnetic shielding and can therefore be installed close to a TV set. Note, however, that placing speakers too close

to a TV may in some cases produces distortion in the color reception. In such case, turn on the TV and check that color reproduction is

normal. If color is distorted, turn the TV off for 15 to 30 minutes, then turn it back on and check again. (This allows the TV's degaussing

circuitry to correct for the magnetic field from the speakers.) If distortion is still present, move the speakers further from the TV.

Left

speaker

Center

speaker

Right

speaker

RightLeft

Surround speakers

This speaker system can provide full Surround sound. To enjoy

the full effect of the Surround sound field, please position the

speakers as described below.

• Place the left and right speakers at each side of your TV. Angle the

speakers towards the listening area to enhance the stereo effect.

• Place the center speaker on the center between the front left and

right speakers. Tilt the speaker upward or downward so that it is

directly facing the listening area.

• Place the surround speakers as high as possible, either directly to

the sides of the listening area or else slightly behind the listening

area. Adjust the angles so that these speakers are facing directly

towards the listeners.

English 3

ENGLISH

Installation Methods

Installation MethodsInstallation Methods

On the Desktop or Shelf

Place the speakers on the desktop, shelf or a similar level surface.

On the Wall

The speakers include mount holes for wall mounting. You can hang the front and surround speakers on the wall vertically, and the cen-

ter speaker horizontally.

7 Front speaker , Surround speaker

1. Screw a single screw into the wall at the desired

location. Screw it only part way in, so that the

screw projects 8 to 10 mm (5/16 to 3/8 inches)

outward from the wall surface.

2. Hang the speaker by fitting the top mount hole (at

the upper rear of the speaker) over the extend-

ing part of the screw. Confirm that the speaker is

held firmly and securely in place.

7 Center speaker

1. Screw two screws into the walls 96 mm (3-3/4

inches) apart, making sure that screws are hori-

zontally level. Screw each screw only part way in,

so that the screw projects 8 to 10 mm (5/16 to 3/8

inches) outward from the wall surface.

2. Hang the speaker by fitting the two mount holes

(at the rear of the speaker) over the extending

part of the screw. Confirm that the speaker is

held firmly and securely in place.

Various mounting methods

7 On the optional Kenwood stand (SR-8000)

(front speaker and surround speaker only)

The speaker can be installed on the SR-8000 stand optionally

available from Kenwood.

7 On the commercially available speaker mount or

bracket (front speaker only)

Any commercially available speaker mount or bracket can also be

used (provided that the speaker can be fixed using an M5 screw

with a pitch of 60 mm and effective thread length of 10 to 13

mm).

For details, read the instruction

manual for the speaker mount or

bracket.

Attaching the cushions

Attach cushions to the base of the speaker as shown below. The

cushions prevent the speaker from sliding, and dampen its vibra-

tions.

Front speaker, Center speaker

Surround speaker

Precautions

Please observe the following precautions when mounting speakers onto the wall or speaker stand.

• Be sure that the wall you are using is strong enough to support the full weight of the speaker (approx. front speaker : 0.6 kg [1.3 lb], cen-

ter speaker : 0.6 kg [1.3 lb], surround speaker : 0.5 kg [1.1 lb]).

• Wall screws must be purchased separately.

• Be sure to use screws that are appropriate for the wall or stand you are using, and that are long enough to provide sufficient strength.

• If you are uncertain about the wall's support strength, the type of screw to use, or any other points regarding this type of installation,

please consult a contractor or other qualified person before proceeding.

Be sure to follow the procedure given here when carrying out installation. Kenwood can assume no liability for injury or damage that

may occur if a speaker setup falls from the wall as a result of incorrect installation or insufficient support strength.

8 - 10 mm

(5/16 - 3/8")

96 mm

(3-3/4")

E ective thread

length

M5 screw

4 mm

(3/16")

9 mm

(3/8")

4 mm

(3/16")

9 mm

(3/8")

4 mm

(3/16")

Produktspezifikationen

Marke:	Kenwood
Kategorie:	Lautsprecher
Modell:	KS-1300HT
Empfohlene Nutzung:	Heimkino
RMS-Leistung:	- W
Audio Kanäle:	5.0 Kanäle
Frontlautsprechergewicht:	600 g
Magnetisch abgeschirmt:	Ja
Satelliten Effektivwert Energie:	- W
Anzahl der Satelliten:	2
Satellite Lautsprecher Abmessungen (WxDxH):	91 x 92 x 180 mm
Verstärkungsgerät enthalten:	Nein
Satellitenlautsprecherfrequenzbereich:	140 - 20000 Hz
Satellitenlautsprecher Widerstand:	8 Ohm
Gewicht Satellitenlautsprecher:	600 g
Zentrallautsprecher - Frequenzbereich:	140 - 20000 Hz
Center Lautsprecher Abmessungen (WxDxH):	180 x 92 x 91 mm
Zentrallautsprechergewicht:	600 g
Satellite Lautsprecher Wandmontage:	Ja
Center Lautsprecher Wandmontage:	Ja
Front Lautsprecher Frequenzbandbreite:	140 - 20000 Hz
Frontlautsprecher Abmessungen (BxTxH):	91 x 92 x 180 mm
Front Lautsprecher Impedanz:	8 Ohm
Front Lautsprecher Wandmontage:	Ja