Kenton PRO-DCB Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kenton PRO-DCB (11 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
PRO
PROPRO
PRO-
--
-DCB
DCBDCB
DCB
PROFESSIONAL BI-DIRECTIONAL
MIDI-DCB CONVERTER
Operating manual
2
PRO DCB
INTRODUCTION
Congratulations on your purchase. The PRO DCB is much more than just a MIDI to DCB
converter, incorporating a built in LFO as well as filter and arpeggio clock control. Please
take some time out to read through all the manual to avoid any operational difficulties.
CONNECTIONS
MIDI In
Plug your MIDI keyboard or sequencer`s MIDI Out into here.
MIDI Out
Plug this into the MIDI In of your MIDI keyboard, when using the units DCB-MIDI capabilities
MIDI Thru
Plug this into the MIDI In of another piece of your MIDI equipment should it be necessary.
DCB
Plug this into your synth`s input marked DCB. This transmits and receives DCB information.
AUX
Plug this into your synth`s input marked VCF. This controls the filter cutoff via MIDI.
ARP CLOCK
Plug this into your synth`s input marked ARP CLOCK, this controls the speed of the arpeggio clock,
and syncs it to MIDI clock.
9-15V DC
Plug your power adaptor (not supplied) into here. The converter will take an adapter with a range
of 9-15V. We recommend the Kenton power supply which is made especially for the PRO-DCB but
any plug-top supply can be used as long as the output is regulated and is in this voltage range. Do
not use any adaptor which has an output voltage of higher than 15v. The PRO-DCB must not share
a power adaptor with any other device of any kind as this may damage your unit.
Juno/
Ju
p
iter
MIDI Master
keyboard/computer
MIDI ou
t
DCB,
and Filter
Arpeggio Clock
MID
I
In
To the MIDI In
of your other
MIDI keyboard
MIDI
Thru
9-15V external
p
ower adapter
DCB out
DCB TO
MIDI MIDI
out
3
Switching On
When the PRO DCB is switched on, the words KENTON PRO DCB scroll across the display.
The Display
There are 3 digits on the 7-segment display. The 1st digit shows which parameter is ready for editing.
The right-hand, 2nd & 3rd digits will then display what the value of the parameter is.
There are also 3 red dots which you may see appear. The 1st dot when lit indicates the SELECT
button is in reverse operation (see below), the middle dot when MIDI information is being received
on the selected channel, and the 3rd dot will light when the unit receives DCB information (i.e.
when it is being used in DCB-MIDI mode).
Stepping through parameters
Each parameter is accessed using the SELECT button. There are 14 parameters in the menu, listed in
the next section `Parameters`.
Press the SELECT button to get to the parameter in question, then use the INCrement (+) and
DECrement (-) buttons to edit the value.
If you press and hold the SELECT button for more than 1 second, you can step through the
parameters in the opposite direction. A red LED dot will light up to indicate this. If the
SELECT button
is pressed and held for 1 second again, the direction will return to normal and the red LED dot will
disappear.
Displaying values above 99
When displaying values from 0 to 99, you will see the digits as you would expect.
When displaying values above 99, the following format is used :-
a dash " - " at the bottom of the left-hand display = 100+
a dash " - " in the middle of the left-hand display = 110+
a dash " - " at the top of the left-hand display = 120+
No values above 127 are used.
Speeding up editing
If you press and hold the INC key, then also hold the DEC key, the value will increase faster.If you
press and hold the DEC key then also hold the INC key, the value will decrease faster.
Storing Set-ups
The set-ups can be stored in non-volatile memory. To do this, press & hold the
SELECT button (for
approx. 6 seconds) till the display reads `st`.
EDITING THE PRO DCB
DCB info.
SELECT steps
backwards
MIDI
info.


Produktspezifikationen

Marke: Kenton
Kategorie: Nicht kategorisiert
Modell: PRO-DCB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kenton PRO-DCB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Kenton

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-