KEF KW1-RX Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für KEF KW1-RX (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
KW1 WIRELESS SUBWOOFER ADAPTER KIT
Performance with convenience
KW1 is a wireless adapter system designed to work with KUBE 8b, 10b,
12b and KF92 of KEF subwoofers. Comprising a discreet transmitter
and receiver, using KW1 means KEF subwoofers can be optimally
placed, rather than limited by trailing cables. The high-quality wireless
transmission delivers every ounce of detail and impact from your
favourite  lms and music. KW1 is also perfectly suited for use with KEF's
LSX and LS50 Wireless Music Systems.
The KEF di erence
The diminutive transmitter and receiver units are designed for
function without drawing attention to themselves. The transmitter can
be powered by USB, while the receiver is powered directly by the KEF
subwoofer expansion port. In many cases, additional power sockets
are not required.
Unlike similar devices, KW1 operates in the high bandwidth 5GHz band,
delivering high-resolution audio up to 24bit/48kHz. Pairing is intuitive,
while a range of up to 30m (line of sight) makes subwoofer placement
easy. An advanced channel selection algorithm, vanishingly low latency
and data encryption ensures that day-to-day use is not only hassle-
free, but secure. The receiver is also available separately, allowing two
KEF subwoofers to receive the same signal wirelessly from the same
transmitter.
Expand your System Further
The KW1 RX receiver is also available separately, allowing a single
transmitter to deliver high quality audio to a second KEF subwoofer
wirelessly. By adding a second subwoofer, bass performance becomes
more consistent throughout the room, improving the experience for
every member of the audience.
Technology
• 24-bit 48KHz high resolution audioHigh Performance -
for pristine performance
• 5.2 & 5.8GHz selectable digital wirelessLossless Audio -
link for near lossless audio
• Advanced RF Selection Algorithm Advanced Algorithm -
• Wide Range - Up to 15 meter (30m/ 100 ft line of sight)
operational distance between transmitter and receiver
• Low Latency - Designed with latency of <17ms
KEF reserves the right, in line with continuing research and development, to amend or change speci cations. E&OE.
Visit: KEF.com for more about KEF and its products.
K W 1
Speci cations:
Model KW1 TX/RX System KW1 RX Receiver
Radio Frequency 5.2GHz and 5.8GHz 5.2GHz and 5.8GHz
Sampling Rate 24bit, 48KHz 24bit, 48KHz
Latency <17ms <17ms
Link Distance Max 100 ft (Line of sight) Max 100 ft (Line of sight)
Frequency Response 10Hz - 20kHz 10Hz - 20kHz
Signal-to-noise Ratio >80dB >80dB
Transmitter Power Input 5V DC 1A -
Audio Output Level 2V 2V
Transmitter Input Level 2V -
Total harmonic distortion typ.-90 dB typ.-90 dB
Radio Frequency 5150-5250MHz ≤ 23dBm 5150-5250MHz ≤ 23dBm
Output Power 5725-5850MHz ≤ 25mw 5725-5850MHz ≤ 25mw
Dimension H x W x D
Transmitter
Receiver
21.4 x 72 x 79.5mm
27 x 37 x 72mm
-
27 x 37 x 72mm
05.2020 | KW1
Transmitter Receiver


Produktspezifikationen

Marke: KEF
Kategorie: Nicht kategorisiert
Modell: KW1-RX

Brauchst du Hilfe?

Wenn Sie Hilfe mit KEF KW1-RX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert KEF

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-