JVC RX-7042S Bedienungsanleitung

JVC Empfänger RX-7042S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JVC RX-7042S (52 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/52
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1170-001B
[J]
RX-7040B/RX-7042S
AUDIO/VIDEO CONTROL RECEIVER
INSTRUCTIONS
G-1
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
ATTENTION
Afin d’éviter tout risque d’électrocution, d’incendie, etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le
coffret de l’appareil.
2. Ne pas exposer l’appareil à la pluie ni à l’humidité.
Warnings, Cautions and Others/
Mises en garde, précautions et indications diverses
Caution–– STANDBY/ON button!
Disconnect the mains plug to shut the power off completely. The
STANDBY/ON button in any position does not disconnect
the mains line. The power can be remote controlled.
Attention––Commutateur STANDBY/ON!
Déconnecter la fiche de secteur pour couper complètement le
courant. Le commutateur STANDBY/ON ne coupe jamais
complètement la ligne de secteur, quelle que soit sa position. Le
courant peut être télécommandé.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Section 820-40 of the NEC which provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
For Canada/pour Le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B
LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPA-
RATUS AS SET OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,”
ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE
BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS
NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME
SUR LE MATERIEL BROUILLEUR; “APPAREILS NUMERIQUES”,
NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.
For U.S.A
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1
Table of Contents
Basic Settings........................................... 21
Quick Speaker Setup ................................................................ 21
Basic Setting Items ................................................................... 22
Basic Procedure ........................................................................ 23
Setting the speakers ........................................................... 23
Setting the speaker distance ............................................... 24
Setting the bass sounds ...................................................... 24
Selecting the main or sub channel ..................................... 25
Setting for easy and effective surround operations ............ 25
Setting the digital input terminals ...................................... 25
Setting the component video input .................................... 26
Memorizing the volume level for each source ................... 26
Adjusting Sound ........................................ 27
Basic Adjustment Items............................................................ 27
Basic Procedure ........................................................................ 27
Adjusting the equalization patterns.................................... 28
Adjusting the speaker output levels ................................... 28
Adjusting the sound parameters
for the surround and DSP modes ................................. 28
Using the Surround Modes ..........................
30
Reproducing Theater Ambience ................................................ 30
Introducing the Surround Modes ............................................. 30
Surround Modes Applicable to the Various Software .............. 32
Activating the Surround Modes ............................................... 33
7 Activating the EX/ES setting ............................................ 33
7 Activating the surround modes automatically .................. 33
7 Activating the surround modes manually ......................... 33
Using the DSP Modes ................................ 34
Reproducing the Sound Field ................................................... 34
Introducing the DSP Modes ..................................................... 34
Activating the DSP Modes ....................................................... 35
Using the DVD MULTI Playback Mode .......... 36
Activating the DVD MULTI Playback Mode .......................... 36
COMPU LINK Remote Control System ......... 37
AV COMPU LINK Remote Control System .... 38
Operating JVC’s Audio/Video Components ... 40
Operating Audio Components .................................................. 40
Operating Video Components .................................................. 41
Operating Other Manufacturers’
Video Equipment.................................... 42
Troubleshooting ......................................... 45
Specifications............................................ 46
Introduction ................................................ 2
Features ...................................................................................... 2
Precautions ................................................................................. 2
Parts Identification ...................................... 3
Getting Started ........................................... 6
Checking the Supplied Accessories ........................................... 6
Putting Batteries in the Remote Control .................................... 6
Connecting the FM and AM Antennas ....................................... 6
Connecting the Speakers and Subwoofer ................................... 7
Connecting Audio/Video Components ....................................... 9
7 Analog connections ............................................................ 9
7 Digital connections ........................................................... 12
Connecting the Power Cord ..................................................... 12
Basic Operations ....................................... 13
Daily Operational Procedure .................................................... 13
Turning On the Power .............................................................. 13
Selecting the Source to Play ..................................................... 13
Adjusting the Volume ............................................................... 14
Selecting the Front Speakers .................................................... 15
Turning On and Off the Subwoofer Sound .............................. 15
Selecting the Analog or Digital Input Mode ............................ 15
Setting the Dynamic Range ...................................................... 16
Attenuating the Input Signal .................................................... 16
Turning Analog Direct On and Off .......................................... 17
Making Sounds Natural ............................................................ 17
Changing the Source Name ...................................................... 17
Reinforcing the Bass ................................................................ 18
Muting the Sound ..................................................................... 18
Changing the Display Brightness ............................................. 18
Using the Sleep Timer .............................................................. 18
Receiving Radio Broadcasts ........................ 19
Tuning in to Stations Manually ................................................ 19
Using Preset Tuning ................................................................. 19
Selecting the FM Reception Mode ........................................... 20
This mark indicates that ONLY the remote control
CAN be used for the operation explained.
Remote
NOT
This mark indicates that the remote control
CANNOT be used for the operation explained.
Use the buttons and controls on the front panel.

Produktspezifikationen

Marke: JVC
Kategorie: Empfänger
Modell: RX-7042S

Brauchst du Hilfe?

Wenn Sie Hilfe mit JVC RX-7042S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger JVC

JVC

JVC KD-XD28BT Bedienungsanleitung

6 September 2024
JVC

JVC KS-DR2004D Bedienungsanleitung

3 August 2024
JVC

JVC KW-X850BT Bedienungsanleitung

30 Juli 2024
JVC

JVC KD-X282BT Bedienungsanleitung

29 Juli 2024
JVC

JVC KD-X355 Bedienungsanleitung

29 Juli 2024
JVC

JVC KS-DR2001D Bedienungsanleitung

26 Juli 2024
JVC

JVC RX-7042S Bedienungsanleitung

25 Juli 2024
JVC

JVC KW-Z1000W Bedienungsanleitung

23 Juli 2024
JVC

JVC KW-M780BT Bedienungsanleitung

20 Juli 2024
JVC

JVC VSX-C100 Bedienungsanleitung

3 Juli 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024