JUNG ULZ1755REG Bedienungsanleitung

JUNG Empfänger ULZ1755REG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JUNG ULZ1755REG (6 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
LB management
LB management
LB management
LB managementLB management
Amplifier LED
Amplifier LED
Amplifier LED
Amplifier LED
Amplifier LEDAmplifier LED
Art. no.: ULZ1755REG
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Always disconnect before carrying out work on the device or load.Danger of electric shock. Always disconnect before carrying out work on the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.
A minimum power of 10 kVA is required for operation on isolating transformer networks. Other-
A minimum power of 10 kVA is required for operation on isolating transformer networks. Other-
A minimum power of 10 kVA is required for operation on isolating transformer networks. Other-
A minimum power of 10 kVA is required for operation on isolating transformer networks. Other-A minimum power of 10 kVA is required for operation on isolating transformer networks. Other-
wise it is not ensured that the dimmer will correctly recognise the dimming principle suitable for
wise it is not ensured that the dimmer will correctly recognise the dimming principle suitable for
wise it is not ensured that the dimmer will correctly recognise the dimming principle suitable for
wise it is not ensured that the dimmer will correctly recognise the dimming principle suitable forwise it is not ensured that the dimmer will correctly recognise the dimming principle suitable for
the load. Device can be damaged.
the load. Device can be damaged.
the load. Device can be damaged.
the load. Device can be damaged.the load. Device can be damaged.
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on the
Fire hazard. For operation with inductive transformers, each transformer must be fused on theFire hazard. For operation with inductive transformers, each transformer must be fused on the
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
primary side in accordance with the manufacturer's instructions. Only safety transformers ac-primary side in accordance with the manufacturer's instructions. Only safety transformers ac-
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.
cording to EN 61558-2-6 may be used.cording to EN 61558-2-6 may be used.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Intended use
Intended use
Intended use
Intended useIntended use
– Power enhancement for the dimmers contained in the reference list (see section Tech-
nical data)
– Mounting in a sub-distribution unit on DIN rail according to EN 60715
Lighting systems with an power of more than 1000 W/VA are professional applications.
3
3
3
33 Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
– Connection of several power boosters to a single dimmer
– The total power of the connected loads is divided between the dimmer and power boost-
ers.
– Power is supplied to the connected loads via a common power cable
– Operation using upstream dimmer
– Electronic over-temperature protection
Brightness differences between the lighting on a dimmer without power booster and a
dimmer with power booster are possible.
4
4
4
44 Information for electrically skilled persons
Information for electrically skilled persons
Information for electrically skilled persons
Information for electrically skilled personsInformation for electrically skilled persons
DANGER!
Mortal danger of electric shock.
Mortal danger of electric shock.
Mortal danger of electric shock.
Mortal danger of electric shock.Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
Disconnect the device. Cover up live parts.
Disconnect the device. Cover up live parts.
Disconnect the device. Cover up live parts.Disconnect the device. Cover up live parts.
1 / 6
82400113 11.08.2020
J0082400113
LB management
LB management
LB management
LB managementLB management
Amplifier LED
Fitting and electrical connection
Fitting and electrical connection
Fitting and electrical connection
Fitting and electrical connectionFitting and electrical connection
Figure1: Connection example with a power booster
2 / 6
82400113 11.08.2020
J0082400113
LB management
LB management
LB management
LB managementLB management
Amplifier LED
Figure2: Connection example with two power boosters
(1) Power booster
(2) Dimmer
(3) 2-wire extension
Figure3: Clampable conductor cross-section
3 / 6
82400113 11.08.2020
J0082400113


Produktspezifikationen

Marke: JUNG
Kategorie: Empfänger
Modell: ULZ1755REG

Brauchst du Hilfe?

Wenn Sie Hilfe mit JUNG ULZ1755REG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger JUNG

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-