JRC Radar 2000 Bedienungsanleitung

JRC Scheepsradar Radar 2000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JRC Radar 2000 (54 Seiten) in der Kategorie Scheepsradar. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/54
I
Thank you for purchasing the RADAR 2000 radar.
It will provide many years of trouble free use when operated prop-
erly.
To use your RADAR 2000 properly, please observe the following precautions:
Read this manual thoroughly to gain a good understanding of the capabili-
ties and requirements of this equipment.
Store the manual in a safe location so that it does not become lost or damaged.
Observe standard storage and handling procedures for electronic equipment.
If after proper installation RADAR 2000 appears to be defective, please con-
tact your JRC sales or service representative for assistance.
Symbols Used In This Manual
The following symbols are used in this instruction manual and on the product
itself to ensure correct handling of the product and to protect your safety. Their
meanings are explained below. Please take note of these symbols as you read
the manual.
This symbol is intended to alert the user to the presence of dangerous items to be
handled with every possible cation. For safe operation, read the instructions
carefully.
These symbols are intended to alert the user to the presence of prohibited items
that must never be performed. Read the instructions carefully and do not at-
tempt things prohibited.
This symbol is intended to alert the user to the presence of instructions whose
performance is absolutely necessary. Read the instructions carefully and be
sure they are executed.
Electric shocks
Prohibition
Prohibits
disassembly
Instruction
A safety warning to alert you of possible physical harm to you
or the equipment.
Equipment damage precaution to alert you of possible harm
and/or failure of equipment.
II
Operating Precautions
To avoid electrical shock, never touch the inside of the scanner or
display unit. Leave protective cover on.
High voltage present inside of these units could cause personal injury.
Refer equipment servicing to authorized JRC personnel.
Avoid routinely entering the nearby vicinity of the scanner unit.
The scanner unit rotates quickly and could cause personal injury. The
scanner should be installed in a high place such as the cabin roof,
flying bridge, radar mast, or the top base frame of your ship. If the
scanner cannot be located out of normal human reach, it should be
surrounded with a fence. Prolonged human exposure to radar signals
at close range is not recommended.
Before approaching or removing the scanner unit, turn off the STBY/
OFF and X-MIT/OFF keys on the display unit. Cable connector P1 on
the display unit should be disconnected before removing the scanner
unit from its installed position.
Never sit on the scanner unit.
The radome and/or the parts in the unit may be damaged.scanner
Use your RADAR 2000 system properly by following the instructions
in this manual.
Incorrect operation can detract from optimum system performance.
This radar unit is only an aid to navigation. Its accuracy can be af-
fected by many factors including equipment failure or defects, envi-
ronmental conditions, and improper handling or use. It is the user’s
responsibility to exercise common prudence and navigational judge-
ment. This radar unit should not be relied upon as a substitute for such
prudence and judgment.
WARNING
CAUTION

Produktspezifikationen

Marke: JRC
Kategorie: Scheepsradar
Modell: Radar 2000

Brauchst du Hilfe?

Wenn Sie Hilfe mit JRC Radar 2000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten