Joranalogue Mix 3 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Joranalogue Mix 3 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
MIX 3
3+1 CHANNEL VOLTAGE CONTROLLED AUDIO
MIXER
1
INTRODUC TIO N
By combining a mixer and four VCAs in a single
module, Mix 3 manages to provide a unique
combination of compact size and functionality in
j H - ust 6 HP. igh end signal paths ensure
extremely low noise and distortion, wide
headroom and precise gain control, despite the
small form factor.
E ach of the three main channels has an
exponential response, which is more natural for
audio than linear, as it matches the human
hearing. However, all signal paths are DC-
coupled, so control voltage (CV) signals can be
processed as well.
What truly sets Mix 3 apart from other compact
mixing modules are the three CV inputs,
providing voltage control over the signal levels.
This even allows you to go beyond unity gain and
reach up to +20 dB of amplification. Once a CV
input is used, the corresponding channel knob
becomes a CV attenuator.
When clipping, Mix 3 does so in a clean,
symmetrical way. This yields a very pure
overdriven odd sound, only containing
harmonics, and allows the module to be used as
a triple voltage controlled distortion.
Additional features include audio indicator LEDs,
a fourth auxiliary input, voltage control over the
output level and a line output jumper setting.
CONTENTS
In the Mix 3 box, you’ll find:
 Product card, stating serial number and
production batch.
 16- - -to 10 pin Eurorack power cable.
 Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
 The Mix 3 module itself, in a protective cotton
bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
MIX 3
3+1 CHANNEL VOLTAGE CONTROLLED AUDIO
MIXER
2
CONTROL S & C ONNECTIONS
1 CHANNEL KNOBS
The channel knobs provide manual control over
the signal levels. The response is exponential:
− 60 dB at minimum and 0 dB (unity gain) at
maximum. They also function as CV attenuators
once the corresponding channel CV input is
used.
2 CHANNEL INDICATOR S LED
Each channel features an audio indicator LED
with a VU-like decay. This makes Mix 3 very
convenient in use, especially in large patches
and/or during performance. The LEDs are most
useful for quickly identifying rhythmic signals. As
these are pure audio indicators, slow CV signals
or DC offsets are ignored.
3 S CHANNEL SIGNAL INPUT
Connect your input signals to these sockets.
While designed for audio use, the signal paths
are - -non inverting DC coupled, so control voltage
(CV) signals can be processed as well.
4 CHANNEL CV INPUTS
The channel CV inputs enable exponential
voltage control over each channel’s signal level.
Once a jack is plugged in, the corresponding
channel knob becomes an attenuator for the CV
input. With the attenuator at maximum, the
response is − 0 V, 60 dB at and 0 dB (unity gain)
at +5 V. This corresponds to +12 dB/V. It is even
possible to go far beyond the normal range using
the CV input: from to +20 − − V, 100 dB at 3.33 dB
at +6.66 V.
5 D SIGNAL INPUT
The ‘D’ auxiliary signal input allows you to mix in
a fourth signal with the three main channels. It is
DC- coupled, unity gain, inverting.
MIX 3
3+1 CHANNEL VOLTAGE CONTROLLED AUDIO
MIXER
3
6 LEVEL CV INPUT
An additional CV input is provided to control the
total level of the mix signal. It has the same
response as the channel CV inputs, and can thus
also be used to amplify/distort the entire mix. If
unused, the mix signal level remains unity gain.
7 SIGNAL OUTPUT
The mix signal is available at this output socket.
8 OUTPUT LEVEL JUMPER
On the module’s rear, you’ll find a three- pin
header with a jumper to select the output level.
When the jumper is placed over the left and
centre pins (position ‘L’), the output level is
lowered by 20 dB. This setting is useful for
connecting the Mix 3 output directly to a regular
line input, and off dB of additional ers 20
headroom. Otherwise, the mix signal output
remains full strength. This jumper setting is
independent from the level CV input.


Produktspezifikationen

Marke: Joranalogue
Kategorie: Nicht kategorisiert
Modell: Mix 3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Joranalogue Mix 3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Joranalogue

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-