Joranalogue Dim 2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Joranalogue Dim 2 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
DIM 2
DUAL BNC LAMP DIMMER
1
INTRODUC TION
For whoever has ever struggled with finding their
way around a Eurorack synthesiser on a dark
stage or a dimly lit studio, Dim 2 presents an
illuminating experience. In just 4 HP, it provides
a complete solution to upgrade your modular
system with a pair of dimmable console lights.
The high efficiency PWM dimmers run at high -
frequency, ensuring flicker free and noise- -free
operation. Additionally, extensive line filtering
keeps your Eurorack power supply happy and
clean.
Not limited to just manual control, both
dimmers also feature control voltage (CV) inputs,
turning the connected lamps from simple light
sources to voltage controlled audio-visual
spectacles.
While the use of the included BNC LED lamps is
recommended in order to keep power
consumption low, halogen lamps may be used
as well. Provided your power supply is beefy
enough, up to 6 W of power may be drawn from
each output. This even makes it possible to drive
12 V LED strips, truly making your patches shine
bright.
CONTENTS
In the Dim 2 box, you’ll find:
 Product card, stating serial number and
production batch.
 16- - -to 10 pin Eurorack power cable.
 Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
 Two BNC LED gooseneck lamps, in a
protective cotton bag.
 T 2 he Dim module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
DIM 2
DUAL BNC LAMP DIMMER
2
CONTROL S & C ONNECTIONS
1 BNC LAMP OUTPUTS
The two outputs each provide up to 6BNC W of
power, PWM- dimmable between 0 V and +12 V.
To connect a lamp, first line its connector up with
the notches on the socket, then rotate it
clockwise by 90º until the BNC connector locks
in place. the BNC To release a lamp, push
connector towards the front panel and then
rotate it anticlockwise by 90º.
Use of the included LED lamps is recommended.
However, it is possible to connect any standard
BNC lamp, including halogen types. Note that
some aftermarket LED BNC lamps are not
dimmable, although they can be used normally
when the dimmer knob is set to 100 %.
BNC adapters can be used to connect led strips
and other 12 . V lamps In this case, keep in mind
that all current will be drawn from the system’s
+12 V rail, which should have sufficient power
reserve available.
2 DIMMER KNOBS AND LEDS
Each BNC output has an associated dimmer
knob, which will adjust the lamp’s brightness
from 0 to 100 %. The current status of each
dimmer is displayed on the adjacent LED.
When using any of the CV inputs, the
corresponding knob becomes an attenuator for
the incoming CV signal.
3 DIMMER CV INPUTS
These input sockets are used to provide direct
voltage control over the brightness of the lamps,
with a range of 0 when the V V to +5
corresponding knob is set to its maximum
setting. When the B input socket is not used, it
will receive its CV from input A.
CAUTION: rapidly flashing lights may trigger
seizures in people with photosensitive
epilepsy.
!
DIM 2
DUAL BNC LAMP DIMMER
3
SPECIFI CATIONS
Modul
Modul
Modul
ModulModule forma
e forma
e forma
e formae format
t
t
tt
Doepfer A-100 ‘Eurorack’ compatible module
3 4 30 U, HP, mm deep (inc. power cable)
Milled 2 mm aluminium front panel with non-
erasable graphics
Maxi
Maxi
Maxi
MaxiMaximum curre
mum curre
mum curre
mum curremum current
nt
nt
nt nt draw
draw
draw
drawdraw
+12 V: 150 mA (with included LED lamps)
+12 V: 1000 mA (at maximum load)
− 5 12 V: mA
Power
Power
Power
PowerPower pr
pr
pr
prprotecti
otecti
otecti
otectiotection
on
on
onon
R everse polarity (MOSFET)
Independent output overcurrent protection
I/O impedanc
I/O impedanc
I/O impedanc
I/O impedancI/O impedance
e
e
ee
All inputs: 100 kΩ
Outer di
Outer di
Outer di
Outer diOuter dimensions (H
mensions (H
mensions (H
mensions (Hmensions (H x W x D)
x W x D)
x W x D)
x W x D) x W x D)
128.5 x 20 x 43 mm
Mass
Mass
Mass
MassMass
Module: 55 g
Including packaging and accessories: 270 g
SUPPORT
As all Joranalogue Audio Design products, Dim 2
is designed, manufactured and tested with the
highest standards, to provide the performance
and reliability music professionals expect.
In case your module isn’t functioning as it should,
make sure check your Eurorack power supply to
and all connections first.
If the problem persists, contact your dealer or
send an email to support@joranalogue.com.
Please mention your serial number, which can be
found on the product card or on the module’s
rear side.


Produktspezifikationen

Marke: Joranalogue
Kategorie: Nicht kategorisiert
Modell: Dim 2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Joranalogue Dim 2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Joranalogue

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-