Jonsered LM 2040 HF NovoLette Bedienungsanleitung

Jonsered Rasenmäher LM 2040 HF NovoLette

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Jonsered LM 2040 HF NovoLette (24 Seiten) in der Kategorie Rasenmäher. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
Non-friction & silent
295 61 72 - 01/F
Owner's Manual Hand Lawnmower–
Gebrauchsanweisung her– Handrasenmä
Instructions d'utilisation – Tondeuse à main
Gebruiksinstruktie – Handmaaier
Instruccions de uso – Cortatésped
Instruzioni per l'uso Rasaerba manuale–
Bruksanvisning sklippare– Handgrä
Bruksanvisning ndgressklipper– Hå
Brugsanvisning H ndpl neklipper– å æ
Käyttöohje – Käsiruohonleikkuri
Owner's Manual
1
2
36
5
4
Owner's Manual
NovoLette – Hand Lawnmower
40 cm model
The NovoLette lawnmower is a quality product which is manufactured with
great precision. It will give many years of good service if used and
maintained with reasonable care. It incorporates a friction free cutting
method which is suitable for well-kept lawns etc. NovoLette is easy to
handle and is quiet in use.
Follow the instructions to ensure safe and
correct use.
Safety
• For safe use, it is important that every person who uses the
lawnmower is acquainted with the instructions.
• Never allow children to use or play with the lawnmower.
• Before use, check the function of the mower and the tightness of the
nuts and screws.
• Check that the lawn is free from stones and other objects that could
cause personal injury or damage to the mower.
• For maximum safety, protective goggles and robust shoes with
nonslip soles should be worn.
• Never use the mower barefoot. Take care when mowing sloping
areas – mow diagonally if possible. Be careful when pulling the
mower backwards.
• Never mow near children or pets.
• Use the mower only in daylight.
• Avoid mowing when the lawn is wet and slippery.
• Take care when resetting and servicing the mower. Protective gloves
are recommended. Always use genuine spare parts.
• When the mower is not in use it should be stored out of the reach of
children. Remember that the cylinder rotates easily and the blades
are sharp; the mower can cause serious personal injury.
Fitting the handle. Figs 1 and 2
The handle is fitted using the accompanying lower nut and bolt. Two fixed
10 mm spanners are needed for tightening, or two adjustable spanners.
The handle is mounted on the mower as shown in Fig 2. Note the placing of
the handle clamp. Hold the handle vertical and insert the lower part on one
side into the wide slot so that the stud enters the side hole. Press it in and
insert the the other half of the handle in the same way.
40 cm:s
12 - 38 mm
36
Diametro 150 mm
10,3 kg / 0,07 m3
9,1 kg
400 mm
Carter protezione Acciaio laminato Ruote Polipropilene Pignoni Poliammide con fibra di vetro
Telaio Tube in acciaio Tubi in acciaio con presa morbida epdmImpugnatura
Rivestimento Tutte le parti in acciaio sono verniciate a forno Raccogli-erba Accessorio
Peso E Cubatura con Imballo
Peso netto
Larghezza di taglio
Altezza di taglio, 4 poss.
N. di tagli / m
Rullo di taglio, 5 lame.
40 cm:s
12 - 38 mm
36
Diameter 150 mm
10,3 kg / 0,07 m3
9,1 kg
400 mm
Skyddspl t Hjulå Stål Polypropylene Polyamid med glasfiber Dubbla stålrör Drev Ram Handtag
Stålrör med EPDM-handtag Samtliga ståldetaljer pulverlackerade Ytbehandling Uppsamlare
Tillbehör
Bruttovikt / volym, emballerad
Nettovikt
Klippbredd
Klipphöjd, 4 pos.
Antal klipp / m
Knivcylinder, 5 knivar
40 cm:s
12 - 38 mm
36
Diameter 150 mm
10,3 kg / 0,07 m3
9,1 kg
400 mm
Tekniske data
Deksel Hjul Stål Polypropylene Polyamid med glasfiber Drev Ramme Doble stålrör
H ndtak Finishå Stålrör med EPDM-håndtag Samtliga ståldetaljer pulverlakkert
Oppsamler Ekstrautstyr
Vekt / volum, emballert
Nettovekt
Klippebredde
Klippehøyder, 4 trinn
Antall klipp / m
Knivsylinder, 5 kniver
40 cm:s
12 - 38 mm
36
150 mm diameter
10,3 kg / 0,07 m3
9,1 kg
400 mm
Tekniske data
Grensk rm Hjulæ Stål Polypropylene Polyamid med glasfiber DobbeltDrev Ramme
stålrørkonstruktion Stålrør med EPDM-håndtag Alle ståldetaljer erH ndtagåFinish
pulverlakerede Opsamler Tillbehør
Bruttovægt / volumen (i karton)
Nettovægt
Klippebredde
Klipphøjde, 4 pos
Antal klip pr. m.
Knivcylinder, 5 knive
40 cm:s
12 - 38 mm
36
Halkaisija 150 mm
10,3 kg / 0,07 m3
9,1 kg
400 mm
Tekniset tiedot
Suojakotelo Teräslevy Py r tö ä Polypropyleeni Hammasrattaat Polyamidi ja lasikuitu
Asia Kahva Kaksois-teräsputki Teräsputket EPDM-pehmusteella Pinnoitus Kaikki teräosat on
puuterimaalattu Ruohonker jää ä Lisävaruste
Kuljetuspaino / - tilavuus
Nettopaino
Leikkuuleveys
Leikkuukorkeudet, 4 kpl
Leikkuita / m
Leikuusylinteri, 5 terää
Dati Tecnici
Tekniska data


Produktspezifikationen

Marke: Jonsered
Kategorie: Rasenmäher
Modell: LM 2040 HF NovoLette

Brauchst du Hilfe?

Wenn Sie Hilfe mit Jonsered LM 2040 HF NovoLette benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Rasenmäher Jonsered

Bedienungsanleitung Rasenmäher

Neueste Bedienungsanleitung fĂĽr -Kategorien-