JL Audio MMR-40 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio MMR-40 (2 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
MediaMaster® NMEA 2000®
Network Controller
Product Description
The MMR-40 is a NMEA 2000® network
controller designed to add full-function
auxiliary control to MediaMaster® source units.
Featuring a color LCD display and water-
resistant (IP66 rated) design, the MMR-40
connects directly to vessel networks using
applicable NMEA 2000® cables and connectors
(sold separately).
Note: Remote control functionality is solely
derived from the MediaMaster® source
unit connected to the network. Please visit
www.jlaudo.com for the most current list of
compatible MediaMaster® source units.
What Is Included
(1) MMR-40 Network Controller
(1) Mounting gasket
(1) Mounting template
(4) Mounting screws
(1) Protective sun cover
(1) User Manual
Safety Considerations
• While this product is designed to be water-
resistant, it should never be submerged
under water or subjected to high-pressure
water spray.
• Do not mount in areas of extreme heat.
• Ensure this product is securely installed so
that it does not come loose in the event
of a collision/sudden jolt or as a result or
repeated vibrations during normal operation.
• Check before drilling to make sure that you
will not be drilling into a fuel tank, gas/brake
line, wiring harness, or other vital system.
• Secure all wiring as needed, using cable
ties or wire clamps to protect them from
moving parts and sharp edges.
• Always follow proper safety procedures and
wear eye-protection at all times with a dust
mask and gloves when cutting.
General Command Functions
Below is a list of general source unit functions
that are controlled by the MMR-40.
Note: The functionality of some commands will
vary depending on the specific MediaMaster®
source unit connected to the network.
MMR-40
Button /
Description General Source Unit Functions
Power/Source
• Press to turn ON
• Press and hold to turn OFF
• Press to display the menuSOURCE: Select
VOL/SEL
(Knob)
Volume/Select
• Rotate to adjust volume
• Rotate to scroll thru menu options
• Press to choose/enter (menu options)
Back/Menu
• Press to go back or return to the previous screen
• Press to access available menu options
Favorites
• Press and hold to store a channel/station as a preset
• Press to view your list of stored presets and to access
the Favorites: Edit menu.
Settings
• Press to access the Tone, Balance & Crossover menu
• Press and hold to access the System Settings: Main Menu
Forward
• Press to tune in the next frequency/station/track
• Press and hold to seek to the next channel or
skip forward/fast-forward
Backward
• Press to tune in the previous frequency/station/track
• Press and hold to seek to the previous channel or
skip backward/fast-rewind
Mute/Play/
Pause
• Press to mute/unmute/pause/resume audio
• Press and hold to access available Play options
Day/Night
• Press to toggle between Day/Night display settings
of the MMR-40
• Press and hold to access the System Settings:
Display menu of the MMR-40
3. Place the MMR-40 into the opening and
check that the mounting holes remain
aligned with the pilot hole marks taken
from the template. If not, adjust and mark
new holes as necessary.
4. Remove the MMR-40 and drill four (4) pilot
holes in the mounting surface at the pilot
hole marks.
5. Peel the adhesive backing from the
mounting gasket and affix to the rear of
the bezel. Connect all wiring and place the
MMR-40 into the opening.
6. Secure the MMR-40 using the four (4)
mounting screws. Press the trim ring onto
the front of the MMR-40. MMR40-MAN 010318 • Printed in China
2-Year Limited Warranty (U.S.A.)
Visit www.jlaudio.com for warranty details.
For Service Information in the U.S.A. please call JL Audio
customer service: (954) 443-1100 during normal business hours
(Eastern Time) • JL Audio, Inc • 10369 N Commerce Parkway,
Miramar, FL 33025
International Warranties:
Products purchased outside the United States of America are
covered only by that country’s distributor and not by JL Audio, Inc.
Connections
The MMR-40 is equipped with a NMEA 2000®
Micro-C connector to interface with vessel
networks using applicable NMEA 2000®
cables and connectors (sold separately). A
USB connector is also included and used for
future software updates.
Mounting & Installation
The diagram at right shows a typical
mounting procedure into a fiberglass panel.
A mounting template is included to aid
in measuring and marking the mounting
surface before cutting or drilling.
Make sure to carefully plan the routing of
the remote’s connection cables prior to
cutting or drilling any panels.
1. Press along the perforation to remove the
center section of the mounting template.
(Discard the center section.) The template
can be used to verify there is sufficient flat
surface area for mounting and as a guide
for cutting the opening. Tape the template
to the mounting location and mark the
surface for cutting the opening and drilling
pilot holes.
2. Use a jigsaw or rotary tool to cut an
opening in the mounting surface. If
necessary, use a file or sandpaper to
adjust the opening for proper fitment and
smooth the edges.


Produktspezifikationen

Marke: JL Audio
Kategorie: Fernbedienung
Modell: MMR-40

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio MMR-40 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Fernbedienung JL Audio

Bedienungsanleitung Fernbedienung

Neueste Bedienungsanleitung für -Kategorien-