JETI TD1609S Bedienungsanleitung

JETI Funkgesteuertes Spielzeug TD1609S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JETI TD1609S (7 Seiten) in der Kategorie Funkgesteuertes Spielzeug. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/7
Manual DITEX-Manager
© 2016 Hacker Motor GmbH 1 Side
Manual Soware DITEX-Manager
With this guide, we show you how the soware DITEX manager should be applied in individual servo
programming. The soware can be download from www.Ditex-Servo.com. For more informaon,
please visit www.Ditex-Servo.com, Hacker-Motor.com or our YouTube video channel.
To program a Ditex servo rst install the soware. For programming the servos the USB interface
(Hacker part number 87201006) is required.
Open the soware and connect the USB interface to your computer. The LED of the interface lights
up green when the connecon is successful. Thereaer, plug the servo to the interface and the so-
ware will open automacally. The servo conrms this with a tone sequence.
If you click the "queson mark" in the top left to open the main menu
of the soware, there are some basic sengs of the soware that can
be changed .
Here you can change the language.
In the Sound menu, the sound of the software can be changed or turned o
The design of the soware can be chosen to your own preferences
Here you can load the update to the currently connected servo.
When pressing this buon, the Manager is restored to the original state.
General informaon
Any changes that need to be performed on the servo-soware have to be conrmed by
Otherwise the sengs will be not saved in the servo!
Manual DITEX-Manager
© 2016 Hacker Motor GmbH 2 Side
SETUP
Adjusng the servo center posion .
Maximum travel A
Maximum travel B
max. Limit travel A
max. Limit travel B
Changing servo direcon
The mode "NARROW" is for specic applicaons that require a higher drive
frequency. For all other applicaons u the "NORMAL" mode. se
Adjust the servo-speed
Possibility of reducing the maximum servo-torque
The servo drives for the set me is with full torque, this allows a more sensi-
tive control to the zero posion.
Here you can choose how the servo on disconnuaon of the servo pulses
should behave by the receiver. This mode is only acve when an interrup-
on of the signal cable, or if the receiver is in acve fa -safe with no servo il
output pulses.
Servo-speed to the specied fail-safe posion.
Posion where the servo drives when signal loss. ,
Manual DITEX-Manager
© 2016 Hacker Motor GmbH 3 Side
Prevents a sudden start of the servos when turning on the model. The servos
drive the zero posion at set speed and force. We recommend to let the so
start acve, this conserves the servo, linkage and the model.
Here are the current posion of the servo is displayed in degrees.
This is a servo tester enables you to move the servo.
Also used to control the travel sengs that you
made.
This is a special feature for adjusng the center of a rudder. If you have
connected the servo to the linkage and the rudder, press the icon "DISEN-
GAGE". Now you can bring the rudder by hand in zero posion. Then press
the icon "ENGAGE" and the servo saves the current posion as the new
zero posion. Pressing the icon "SET NEUTRAL" always moves the servo to the programmed center
posion.
SECURITY
Here, the maximum internal power temperature is set at which the servo
outputs an audible warning and the power limit is enforced. This is a secu-
rity feature to the servo from overheang by example treacly / blocking a
linkage to protect. We recommend these values to change only in individual
cases or in special applicaons.
In fall below or exceed the adjusted voltages the servo will warn acous-
cally when you enable this feature in the sound monitor.

Produktspezifikationen

Marke: JETI
Kategorie: Funkgesteuertes Spielzeug
Modell: TD1609S

Brauchst du Hilfe?

Wenn Sie Hilfe mit JETI TD1609S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Funkgesteuertes Spielzeug JETI

JETI

JETI TD1609S Bedienungsanleitung

21 August 2024
JETI

JETI JDEX-RR7 Bedienungsanleitung

21 August 2024
JETI

JETI JEX-MF2G-800 Bedienungsanleitung

21 August 2024
JETI

JETI Central Box 220 Bedienungsanleitung

21 August 2024
JETI

JETI MEZON 75 opto (RPM) Bedienungsanleitung

21 August 2024
JETI

JETI Central Box 210 Bedienungsanleitung

21 August 2024
JETI

JETI Duplex Rsat 2 EX Bedienungsanleitung

21 August 2024
JETI

JETI JM-090-L Bedienungsanleitung

21 August 2024
JETI

JETI TD0905L Bedienungsanleitung

21 August 2024
JETI

JETI AddCAP 1640 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Funkgesteuertes Spielzeug

Neueste Bedienungsanleitung für -Kategorien-

Proline

Proline Trencher Bedienungsanleitung

4 Oktober 2024
Futaba

Futaba 12Z Bedienungsanleitung

4 Oktober 2024
Graupner

Graupner 33718.XT60 Bedienungsanleitung

3 Oktober 2024
Amewi

Amewi Hyper Go Bedienungsanleitung

1 Oktober 2024
Carson

Carson Drift Burner Bedienungsanleitung

1 Oktober 2024
Carson

Carson Micro X-Warrior 2.0 Bedienungsanleitung

1 Oktober 2024
Biltema

Biltema 45-8119 Bedienungsanleitung

1 Oktober 2024
Traxxas

Traxxas Stampede Bedienungsanleitung

29 September 2024
Hobbywing

Hobbywing XeRun XR10 Pro WP Bedienungsanleitung

25 September 2024
Hobbywing

Hobbywing XeRun XR10 Stock Spec G2 Bedienungsanleitung

25 September 2024