JETI JDEX-RR12A Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr JETI JDEX-RR12A (66 Seiten) in der Kategorie Funkgesteuertes Spielzeug. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/66
computer radio control system
®
User Manual
User Manual
User Manual
User Manual User Manual
EN
Receivers REX
FW 1.05
FW 1.05
FW 1.05
FW 1.05FW 1.05
COMPLEX RADIO CONTROL SYSTEM
computer radio control system
1. Introduction ......................................................................................... 04
2. Technical data ...................................................................................... 05
2.1 Properties ..................................................................................... 06
2.2 Important Notices ....................................................................... 06
3. Installation ........................................................................................... 08
3.1 Installation in the model ............................................................ 08
3.2 Power supply ............................................................................... 10
3.3 Operation ..................................................................................... 11
3.4 Binding .......................................................................................... 11
3.5 Range test .................................................................................... 12
4. Quick Setup ........................................................................................... 14
4.1 Airplane ........................................................................................ 14
4.1.2 Choice of flight modes ...................................................... 19
4.2 Multicopter ........................................................................... 21
4.2.1 Optimize multicopter settings ........................................ 27
4.2.2 Choice of flight modes ...................................................... 30
1
EN
computer radio control system
4.3 Description of flight modes ...................................................... 31
4.3.1 Manual (Assist Off): Airplanes ........................................ 31
4.3.2 Training: Airplanes ............................................................ 31
4.3.3 Normal (Damping): Airplanes ........................................ 32
4.3.4 Heading Hold: Airplanes .................................................. 32
4.3.5 St abi lizat ion of t he horizo n: Airpl anes a nd
Multicopters ......................................................................... 32
4.3.6 Stabilize: Multicopters ...................................................... 33
4.3.7 Sport: Multicopters .......................................................... 33
4.3.8 Acro: Multicopters ............................................................. 33
4.3.9 Altitude stabilization: Multicopters ............................... 34
5. Additional stabilization features .................................................. 35
5.1 Throttle to PID attenuation (TPA) ............................................ 35
5.2. Airspeed compensation ............................................................ 36
5.3 Additional channels ................................................................... 36
5.4 Camera gimbal ............................................................................ 38
5.5 Connecting an external LED strip ............................................ 39
5.6 Sensor data filtering ................................................................... 41
5.7 Sensor calibration ....................................................................... 42
5.8 Vibration analysis ....................................................................... 43
2
EN
computer radio control system
The JETI model company portfolio contains a diverse offering of
electronic modelling equipment like voltage regulators, motor
speed controllers, telemetry data display equipment, telemetry
sensors and, last but not least, DC/DS transmitters. The JETI
model product manfacturing policy is to constantly produce the
highest quality product possible.
2 Technical data
* xternal ower onnector E P C
Basic Data
REX6A
REX7A
REX10A
REX12A*
Dimensions [mm]
38x25x11
42x28x11
51x28x11
51x28x11
Weight [g]
11
13
16
24
Antenna length [mm]
2x100
2x200
2x200
2x400
# of channel outputs
6
7
10
12
Temperature range [°C]
-10 to +85
-10 to +85
-10 to +85
-10 to +85
Supply voltage [V]
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
Average current [mA]
80
80
80
80
Real time transmission
of telemetry data
Yes
Yes
Yes
Yes
Programming
Tx - DC/DS
Tx - DC/DS
Tx - DC/DS
Tx - DC/DS
Support satellite receiver Rsat
Yes
Yes
Yes
Yes
Power output [dBm]
15
15
15
15
Receiver sensitivity [dBm]
-106
-106
-106
-106
Frequency [MHz]
2400 - 2483
2400 - 2483
2400 - 2483
2400 - 2483
Built-in sensors
3-axis gyroscope, 3-axis accelerometer
Sensitivity of altitude measurement
0,1m
Range of gyroscope measurement
± 2000°/s
Range of accelerometer measurement
± 16G
Gyroscope/accelerometer sampling rate
6600Hz
5
EN
computer radio control system
3.1 Installation in the model
Always place the receiver in the model parallel to the flight axes and
ideally as close as possible to the center of gravity (especially for
multicopters). This is important for the proper functioning of
stabilization and its correct response. It is important that the
mounting of the receiver is made in such a way that the vibrations
from the model are minimized and that the fixation is guaranteed at
the right place. We recommend using a double-sided adhesive tape
for this purpose.
3 Installation
8
EN
computer radio control system
used during stabilization. Check the correct response to the
controls by looking at values displayed in the “Controls” row. If
the servos in the model are not moving, it is ok at this point -
the receiver will not allow servo outputs until the configurati-
on is completed.
11. f) Assign a channel for switching flight stabilization modes .
This channel should be controlled
by a three- position switch, so that
all three flight modes are available.
In position the stabilization is 1,
disabled by default. Switching to
position (center) activates the 2
“Normal” mode. Switching to
position activates the "Heading 3
Hold" mode.
Note: First add a three-position switch to your DC/DS transmitter
as a new function in the Model – Functions Assignment menu.
Then assign this option to a free channel in the Model – Servo
Assignment menu. Subsequently, this three-position switch can
be used here in the receiver setup wizard.
12. If you have selected the option in the previous “Use gimbal”
steps, assign the individual channels to the gimbal control. You
can skip this point and configure the camera gimbal later in the
Configuration -> Channel Assignment -> Gimbal channels.
13. j) Finish the wizard and application settings . When you run the
i)
17
EN


Produktspezifikationen

Marke: JETI
Kategorie: Funkgesteuertes Spielzeug
Modell: JDEX-RR12A

Brauchst du Hilfe?

Wenn Sie Hilfe mit JETI JDEX-RR12A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Funkgesteuertes Spielzeug JETI

Bedienungsanleitung Funkgesteuertes Spielzeug

Neueste Bedienungsanleitung fĂĽr -Kategorien-