JBL SUB 550P Bedienungsanleitung

JBL Subwoofer SUB 550P

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL SUB 550P (6 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
SUB 550P
1X
InclUded ItemS
Your new JBLÂŽ SUB 550P 300-watt powered subwoofer incorporates
a 10" (250mm) forward-ring cone transducer and a built-in high-
performance 300-watt RMS amplier that deliver the powerful,
dynamic and accurate low-frequency performance that makes your
lm soundtracks and music come alive. And with line-level and LFE
inputs, adjustable crossover and phase controls and automatic turn
on/off, the SUB 550P is also simple to connect and set up.
We’re confident that this JBL subwoofer will provide every note
of enjoyment that you expect – and that when you think about
purchasing additional audio equipment for your home, car or ofce,
you will once again choose JBL products.
This owner’s manual contains all the information you need to set up,
connect and adjust your new subwoofer. For even more in-depth
information, go to our Web site: www.jbl.com.
thank YoU For chooSIng thIS JBlÂŽ ProdUct
300-Watt, 10" (250mm) Powered Subwoofer
oWner’S man alU
1X
1X
1X
2
ImPortant SaFetY InStrUctIonS
Read these instructions.1.
Keep these instructions.2.
Heed all warnings.3.
Follow all instructions. 4.
Do not use this apparatus near water.5.
Clean only with dry cloth.6.
Do not block any ventilation openings. Install in accordance with the 7.
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, 8.
stoves, or other apparatus (including ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. 9.
A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or third prong is provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at 10.
the plugs, convenience receptacles and the point where they exit from
the apparatus.
Only use attachments/accessories specied by the manufacturer.11.
Use only with the cart, stand, tripod, bracket or table 12.
specied by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when 13.
unused for long periods of time.
Refer all servicing to qualied service personnel. Servicing is required 14.
when the apparatus has been damaged in any way, such as: when
the power supply cord or plug has become damaged, when liquid
has been spilled or objects have fallen into the apparatus, when the
apparatus has been exposed to rain or moisture, when the apparatus
does not operate normally, or the apparatus has been dropped.
Do not expose this apparatus to dripping or splashing and ensure that no 15.
objects lled with liquids, such as vases, are placed on the apparatus.
To completely disconnect this apparatus from the AC mains, disconnect 16.
the power supply cord plug from the AC receptacle.
The mains plug of the power supply cord shall remain readily operable.17.
Do not expose batteries to excessive heat such as sunshine, re or the 18.
like.
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be
of sufcient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.
WARNING: To reduce the risk of re or electric shock, do not expose this
apparatus to rain or moisture.
IMPORTANT: The subwoofer requires proper ventilation and is not to be
used in an enclosed environment.
USIng the SUPPlIed SPIkeS
Four metal spikes are supplied for use when you place the subwoofer on a
carpeted surface. Using the spikes decouples the subwoofer from the oor
and prevents unwanted acoustic damping.
TO INseRT The sPIkes:
Gently turn the subwoofer upside down on a soft, nonabrasive surface.1.
Unscrew and remove the rubber bumpers from the subwoofer’s feet.2.
Screw each spike into the threaded insert in each foot. Make sure all 3.
four spikes are screwed in completely for stability.
NOTe: NEVER drag the subwoofer to move it, as this will damage the
spikes, the feet and/or the subwoofer cabinet itself. Always lift the sub-
woofer and carry it to its new location.
3
www.jbl.com
English
SUBWooFer rear-Panel controlS and connectIonS
Phase switch: This switch determines whether the subwoofer driver’s
piston-like action moves in and out in phase with the system’s other
speakers. If the subwoofer were to play out of phase with the other
speakers, the sound waves from the other speakers could partially cancel
out the sound waves from the subwoofer, reducing bass performance and
sonic impact. This phenomenon depends in part on the placement of all
the speakers relative to each other in the room.
Input Mode switch: When this switch is in the “Normal” setting, the input
signal from the Line In connectors is active. When this switch is in the
“LFE” setting, the input signal from the LFE In connector is active, and the
subwoofer’s internal crossover is bypassed.
Level control: Use this control to adjust the subwoofer’s volume. Turn the
knob clockwise to increase the volume; turn the knob counterclockwise to
decrease the volume.
Crossover control: This control determines the highest frequency
at which the subwoofer reproduces sounds. The higher you set the
Crossover control, the higher in frequency the subwoofer will operate and
the more its bass will “overlap” that of the system’s other speakers. This
adjustment helps achieve a smooth transition of bass frequencies between
the subwoofer and the other speakers for a variety of different rooms and
subwoofer locations. The Crossover control functions only when NOTE:
the Input Mode switch is in the “Normal” position. When the switch is in
the “LFE” position the subwoofer’s built-in crossover and Crossover control
are bypassed.
On/Standby indicator: This LED indicates whether the subwoofer is in
the On or Standby state:
When the LED glows green, the subwoofer is turned on.•
When the LED glows red, the subwoofer is in the Standby mode.•
When the LED is off, the subwoofer’s Power switch is set to “Off.”•
Line In connectors: The signals from these connectors pass through
the subwoofer’s internal low-pass crossover. When you’re connecting the
subwoofer to the preamp or subwoofer outputs of a receiver/processor
that does not have its own low-pass crossover network, use both Line In
connectors. IMPORTANT: You must also set the Input Mode switch in
the “Normal” position. If your receiver/processor has only one subwoofer
output, you can use either the L or R connector.
LFE In connector: The signal from this connector bypasses the
subwoofer’s internal low-pass crossover. When you’re connecting the
subwoofer to the dedicated subwoofer output of a receiver/processor
that has its own low-pass crossover network, use the LFE In connector.
IMPORTANT: You must also set the subwoofer’s Input Mode switch in the
“LFE” position.
Power switch: Set this switch in the “On” position to put the subwoofer in
the Standby mode (the On/Standby LED lights red); set this switch in the
“Off” position to turn the subwoofer off.
Power Cord connector: After you have made and veried all subwoofer
connections described in this manual, plug the power cord into an active,
unswitched electrical outlet for proper operation of the subwoofer. DO NOT
plug this cord into the accessory outlet found on some audio components.
Green: On
Red: Standby
Level Control
Crossover Control
On/Standby Indicator
Phase Switch
Input Mode Switch
LFE In Connector
Line In Connectors
Power Switch
Power Cord
Connector

Produktspezifikationen

Marke: JBL
Kategorie: Subwoofer
Modell: SUB 550P

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL SUB 550P benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Subwoofer JBL

JBL

JBL SW10 Bedienungsanleitung

30 September 2024
JBL

JBL Stage 220P Bedienungsanleitung

6 September 2024
JBL

JBL Club 122SL Bedienungsanleitung

4 September 2024
JBL

JBL Club 102SL Bedienungsanleitung

4 September 2024
JBL

JBL CVL18S Bedienungsanleitung

3 September 2024
JBL

JBL SUB80P Bedienungsanleitung

31 August 2024
JBL

JBL VT4880ADP Bedienungsanleitung

27 August 2024
JBL

JBL VTX B15 Bedienungsanleitung

27 August 2024
JBL

JBL VLA-C125S Bedienungsanleitung

27 August 2024
JBL

JBL VT4882DP-DA Bedienungsanleitung

27 August 2024

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung fĂźr -Kategorien-

Pioneer

Pioneer S-21W Bedienungsanleitung

13 Oktober 2024
JL Audio

JL Audio SGR-10TW3 Bedienungsanleitung

13 Oktober 2024
Polk

Polk DB1040 Bedienungsanleitung

10 Oktober 2024
Blaupunkt

Blaupunkt GBW801 Bedienungsanleitung

7 Oktober 2024
JL Audio

JL Audio TW1 Bedienungsanleitung

6 Oktober 2024
Jensen

Jensen J12W Bedienungsanleitung

6 Oktober 2024
Musway

Musway MT169Q Bedienungsanleitung

6 Oktober 2024
JL Audio

JL Audio 12W0v3 Bedienungsanleitung

4 Oktober 2024
Yamaha

Yamaha YST-SW315PN Bedienungsanleitung

2 Oktober 2024
Pioneer

Pioneer TS-A3000LS4 Bedienungsanleitung

30 September 2024