JBL CS1214T Bedienungsanleitung

JBL Subwoofer CS1214T

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL CS1214T (5 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
ÂŽ
THE OFFICIAL BRAND
OF LIVE MUSIC.
English
CS SERIES
C 4TS101
CS1214T
car audio
subwoofer enclosures
owner’s manual
2
INSTALLATION WARNINgS AND TIpS
THANK YOU for choosing
a JBLÂŽ CS Series subwoofer
enclosure. These products have
been designed to deliver great
bass performance from a compact,
easily installed enclosure. To get
the best performance from your
enclosure, we strongly recommend
that installation be entrusted to a
qualied professional. Although
these instructions explain how to
install your product in a general
sense, they do not show specic
installation methods that may be
required for your particular vehicle.
If you do not have the necessary
tools or experience, do not attempt
the installation yourself. Instead,
please ask your authorized JBL car
audio dealer about professional
installation.
In order that we may better serve
you should you require warranty
service, please retain your
original sales receipt and serial
number.
WArNiNg: Playing loud music
in an automobile can permanently
damage your hearing as well as
hinder your ability to hear trafc.
We recommend listening at low
levels while driving. JBL accepts no
liability for hearing loss, bodily injury
or property damage resulting from
use or misuse of this product.
iNsTAllATiON Tips
• Alwayswearprotectiveeyewear
when using tools.
• Turnoffallaudiocomponentsand
other electrical devices before
you start. Disconnect the (–)
negative lead from your vehicle’s
battery.
• Checkclearancesonbothsides
of a planned mounting surface. Be
sure that screws or wires will not
puncture brake lines, fuel lines or
wiring harnesses, and that wire
routing will not interfere with the
safe operation of the vehicle.
• Whenmakingelectrical
connections, make sure they are
secure and properly insulated.
• Beforedrillingorcuttingholes,
use a utility knife to remove
unwanted fabric or vinyl, to keep
material from snagging in a drill
bit or saw.
• Donotmountspeakerswhere
they will get wet.
• Ifafusemustbereplaced,be
sure to use the same type of fuse
and current rating as that of the
original.
CHOOsiNg A
MOUNTiNg lOCATiON
FOr ENClOsUrE
Choose a mounting location that
doesn’t interfere with cargo, the
fold-down rear seat or the trunk lid.
The best location is usually a corner
of the trunk or cargo area. Securely
mount enclosure to the mounting
surface, using the supplied material.
3
English
BATTERY
HEAD UNIT
Remote
Turn-On
Speaker Out
Bass Tube
AMP
L R
pOWER CONNECTIONS
Connect the + and – terminals on
the enclosure to the amplifier’s
outputs, observing proper polarity.
Use at least 0.5mm2 speaker wire for
the connections to the enclosure.

Produktspezifikationen

Marke: JBL
Kategorie: Subwoofer
Modell: CS1214T
Breite: - mm
Tiefe: - mm
Produkttyp: Vorgeladener Subwoofer
Produktfarbe: Schwarz
HĂśhe: - mm
Gehäusetyp: Geschlossen
Durchmesser: 330 mm
Subwoofer-Typ: Passiver Subwoofer
Subwoofer Effektivwert Energie: 250 W
Subwoofer Frequenzbereich: 35 - 200 Hz
Gesamtleistung des Subwoofers: 1000 W
Subwoofer Widerstand: 4 Ohm
Schwingspulendurchmesser: 50 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL CS1214T benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Subwoofer JBL

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung fĂźr -Kategorien-