JBL Cinema SB350 Bedienungsanleitung

JBL Soundbar Cinema SB350

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL Cinema SB350 (6 Seiten) in der Kategorie Soundbar. Dieser Bedienungsanleitung war für 127 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

JBL CINEMA

™ SB350

Home Cinema 2.1 soundbar with wireless subwoofer

OwNEr’S MANuAL

JBL CINEMA SB350

TABLE OF CONTENTS

INTRODUCTION 5

ITEMS INCLUDED 5

JBL CINEMA SB350 TOP PANEL CONTROLS 6

JBL CINEMA SB350 SOUNDBAR REAR PANEL CONTROLS AND CONNECTIONS 6

JBL CINEMA SB350 SUBWOOFER CONTROLS AND CONNECTIONS 7

REMOTE CONTROL FUNCTIONS 7

PLACING THE JBL CINEMA SB350 8

OPERATION 9

TURNING THE JBL CINEMA SB350 ON AND OFF 9

OPERATING THROUGH BLUETOOTH

® 9

ADJUSTING THE SYSTEM VOLUME 10

SURROUND MODE BUTTON 10

PROGRAMMING JBL CINEMA SB350 TO RESPOND TO YOUR TV REMOTE 10

TROUBLESHOOTING 11

SPECIFICATIONS 12

JBL CINEMA SB350 SOUNDBAR

REAR PANEL CONTROLS AND

CONNECTIONS

(Software

update only)

HDMI TV

(ARC)

Aux-in OpticalPower

Input AC Remove Caps

Power Switch: The power switch turns the JBL CINEMA SB350

ON/OFF. This switch must be turned on before you can operate the system.

Once this switch is turned on, the system will enter Standby mode

(the top-panel power indicator will be amber).

Power Input AC: Connect the supplied AC power cable to

this input.

HDMI TV (ARC): Connect your television to this input using the

supplied HDMI® cable only if your television HDMI input supports Audio

Return Channel (ARC) feature, the audio signal from the television will

be automatically sent back to the soundbar with this single cable. If your

television does not support ARC, you need to use the optical or analog

connections based on your television’s compatibility. Please refer to your

television user guide to confirm HDMI ARC support.

Pairing Button and LED: Press the Pairing button to

initiate wireless pairing between the soundbar and the wireless subwoofer.

See Pairing the Units for Wireless Operation, on page 9 for more information.

EQ Switch: Use this switch to adjust the soundbar’s bass for either

wall or table mounting.

Aux input (Analog Audio in): You can connect an

analog audio device to the CINEMA SB350 by using the supplied 3.5 mm

to RCA cable.

Optical (Digital Audio in): If your TV, disc player or

cable/satellite tuner has an optical digital output, use the included optical

cable to connect it here. Once a Dolby Digital audio stream is sensed by the

soundbar, its Dolby Digital decoding becomes active.

USB Port: For software update only.

JBL CINEMA SB350 TOP PANEL

CONTROLS

1 2 4 53

Optical audio in

Aux-in Analog

HDMI TV (ARC)

LED

Color

Power Button: The Power button toggles the JBL CINEMA SB350

between ON and Standby. When the JBL CINEMA SB350 is in Standby mode

(the button LED indicator is amber), press this button to turn the system

ON (the button LED indicator turns white). The subwoofer will remain on for

approximately ten minutes after the soundbar goes into Standby mode. If the

system is in MUTE mode, the power indicator will also blink white.

NOTE: The JBL CINEMA SB350 and wireless subwoofer

will switch into standby mode after 10 minutes of inactivity.

Auto turn-on: The JBL CINEMA SB350 has a signal detector that

automatically turns the unit ON when it senses an audio signal on the HDMI

input or paired Bluetooth source (when using HDMI, TV must support HDMI

ARC). The auto turn-on mode gets activated for analog or optical inputs only

when the JBL CINEMA SB350 detects an audio signal on the input it was on

before going into automatic Standby mode.

NOTE: If the JBL CINEMA SB350 is put in standby using

the power button, this will deactivate the auto turn-on

feature on the analog and optical inputs.

Source Button: The Source can be changed by pressing the

Source Selection Button. Cycle through options to select your preferred Source

in this order: AUX > OPTICAL > HDMI ARC > AUX.

Volume Up/Down Buttons: Press the ( – ) button to

reduce the volume, press the ( + ) button to increase the volume.

NOTE: Pressing both Volume buttons at the same time will

mute the system. Pressing either Volume buttons while the

system is muted will restore the sound.

Surround Mode Button: The surround mode button

turns Harman Display Surround processing ON and OFF. The surround mode

indicator turns amber when Harman Display Surround is active and turns

white when Harman Display Surround is not active (normal stereo sound –

see page 10 for more details).

Bluetooth® (BT): The Bluetooth button is used to set the JBL

CINEMA SB350 into Bluetooth mode. You can pair the system with Bluetooth-

enabled devices using this button (see page 9).

NOTE: JBL CINEMA SB350’s Bluetooth device name is

CINEMA SB350.

1) Power switch

2) Power input AC

3) HDMI ARC TV

4) Subwoofer wireless pairing button and LED indicator

5) Wall / Table EQ

6) Analog Audio in

7) Optical Audio in

8) USB port

USB

32 5

1) Power on / Standby

2) Source selection

3) Volume +/-

4) Surround mode

5) Bluetooth source /

Pairing

Produktspezifikationen

Marke:	JBL
Kategorie:	Soundbar
Modell:	Cinema SB350
FM-Radio:	Nein
Bluetooth:	Ja
Mitgelieferte Kabel:	Audio (3.5mm), HDMI
Produktfarbe:	Schwarz, Silber
Übertragungstechnik:	Verkabelt & Kabellos
Garantiekarte:	Ja
RMS-Leistung:	320 W
Anzahl USB 2.0 Anschlüsse:	1
Paketgewicht:	10800 g
Fernbedienung enthalten:	Ja
Schnellstartübersicht:	Ja
Betriebsanleitung:	Ja
Anzahl HDMI-Anschlüsse:	1
Audio Kanäle:	2.1 Kanäle
Audio Return Channel (ARC):	Ja
Frequenzbereich:	45 - 20000 Hz
Hochtönerdurchmesser (Imperial):	1.25 "
Eingebaute Audio-Decoder:	Dolby Digital
Receiver enthalten:	Nein
Subwoofer-Treiberdurchmesser (imperial):	6.5 "
Verpackungsabmessungen (BxTxH):	1022 x 314 x 370 mm
Anzahl der HDMI-Ausgänge:	1
Digital-Audio-Optical-In:	1
Gewicht Soundbar:	3300 g
Subwoofer enthalten:	Ja
Subwoofer-Position:	Separat
Hochtönerdurchmesser:	32 mm
Tieftönergewicht:	4800 g
Subwoofer-Konnektivität:	Kabellos
Subwoofer Abmessungen (WxDxH):	242 x 242 x 320 mm
Soundbar Abmessungen (WxDxH):	1000 x 62 x 78 mm
Vollbereichstreiberduchmesser (imperial):	2.25 "
Vollbereichstreiberduchmesser:	55 mm