Indesit Slimline DI9E 2B10 UK Bedienungsanleitung

Indesit Spülmaschine Slimline DI9E 2B10 UK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Indesit Slimline DI9E 2B10 UK (16 Seiten) in der Kategorie Spülmaschine. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

APPLIANCE

1. Upper rack

2. Foldable aps

3. Upper rack height adjuster

4. Upper spray arm

5. Lower rack

6. Cutlery basket

7. Lower spray arm

8. Filter Assembly

9. Salt reservoir

10. Detergent and Rinse Aid dispensers

11. Rating plate

12. Control panel

1. ON-OFF / Reset button with indicator light

2. Program selection button

3. Program indicator lights

4. START/Pause button with indicator light

DAILY REFERENCE

GUIDE

CONTROL PANEL

PRODUCT DESCRIPTION

1 2 3 4

0000 000 00000

Service:

1011

THANK YOU FOR BUYING AN PRODUCT. INDESIT

In order to receive a more complete assistance, please

Before using the appliance carefully read Safety Instructions guide.

PLEASE SCAN THE QR CODE

ON YOUR APPLIANCE IN ORDER

TO HAVE MORE DETAILED

INFORMATION

FIRST TIME USE

SALT, RINSE AID AND DETERGENT

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the retaining

elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes

and on the machine’s functional components.

• It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see Prod-

uct Description) and must be lled when the green oat on the cap of the

salt reservoir is no longer visible..

1. Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2. Only the rst time you do this: ll the salt

reservoir with water.

3. Position the funnel (see gure) and ll the salt

reservoir right up to its edge (approximately 1

kg); it is not unusual for a little water to leak out.

4. Remove the funnel and wipe any salt residue

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the wa-

ter softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the

procedure before the beginning of the washing cycle to avoid corrosion.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in your

house. This information can be obtained from your local water supplier.

The factory sets the default value for the water hardness

• Switch on the appliance by pressing the button.ON/OFF

• Switch o the appliance by pressing the button.ON/OFF

• Hold down button for 5 seconds, until you hear a beep.P

• Switch on the appliance by pressing the button.ON/OFF

• The program indicator light of the current set level ashes.

• Press button to select the desired hardness level P(see WATER

HARDNESS TABLE).

Water Hardness Table

Level

°dH

German

degrees

°fH

French degrees

°Clark

English degrees

1 Soft 0 - 6 0 - 10 0 - 7

2 Medium 7 - 11 11 - 20 8 - 14

3 Average 12 - 16 21 - 29 15 - 20

4 Hard 17 - 34 30 - 60 21 - 42

5Very

hard 35 - 50 61 - 90 43 - 62

• Switch o the appliance by pressing the button.ON/OFF

Setting is complete!

As soon as this procedure is complete, run a program without loading.

Only use salt that has been specically designed for dishwashers.

If the salt container is not lled, the water softener and the heating

element may be damaged as a result of limescale accumulation.

Using of Salt is recommended with any type of dishwasher detergent.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser shouldA

be lled when when the dark optical indicator on the dispenser door C

becomes transparent.

1. Open the dispenser by pressing and pulling up the tab on the lid.B

2. Pour in the rinse aid (max.110 ml), making sure it does not overow

from the dispenser. If this happens, clean the spill immediately with

a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

f you are not completely satised with the drying results, you can adjus

the quantity of rinse aid used.

• Switch the dishwasher on using the button.ON/OFF

• Switch it o using the button.ON/OFF

• Press button three times - a beep will be heard.P

• Switch it on using the button.ON/OFF

• The program indicator light of the current set level ashes.

• Press button to select the level of rinse aid quantity to be supplied.P

• Switch it o using the buttonON/OFF

Setting is complete!

If the rinse aid level is set to 1 (ECO), no rinse aid will be supplied.

A maximum of 5 levels can be set according to the dishwasher model.

The factory setting is specic to the model, please follow instruction

above to check this for your machine.

• If you see bluish streaks on the dishes, set a low number (2-3).

• If there are drops of water or limescale marks on the dishes, set a mid-

range number (4-5 ).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device D.

Introduce the detergent into the dry dispenser E only. Place

the amount of detergent for pre-washing directly inside the tub.

1. When measuring out the detergent

refer to the mentioned earlier infor-

mation to add the proper quantity.

Inside the dispenser there are E

indications to help the detergent

dosing.

2. Remove detergent residues

from the edges of the dispenser

and close the cover until it clicks.

3. Close the lid of the detergent

dispenser by pulling it up un-

til the closing device is secured

in place.

The detergent dispenser automatically opens up at the right time ac-

cording to the program.

Usage of detergent not designed for dishwashers may cause mal-

function or damage to the appliance.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories:

For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Values given for programmes other than the eco programme are indicative only. The actual time may vary depending on many factors such as tem-

perature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected

options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

Program

Drying

phase

Duration

of wash

program

(h:min)*)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

1. Eco 50° 4:00 11.5 0.78

2. Intensive 65° 2:30 15.0 1.50

3. Mixed 55° 2:25 15.0 1.35

4. Rapid 40’

45°

-0:40 8.0 0.90

5. Half Load 50° 1:15 11.0 0.90

PROGRAMS TABLE

PROGRAMS DESCRIPTION

Instructions on wash cycle selection.

1 ECO

Eco program is suitable to clean normally soiled tableware, that for this

use, it is the most ecient program in terms of its combined energy

and water consumption, and that it is used to assess compliance with

the EU Ecodesign legislation.

2 INTENSIVE

Program recommended for heavily soiled crockery, especially suitable

for pans and saucepans (not to be used for delicate items).

3 MIXED

Mixed soil. For normally soiled dishes with dried food residues.

4 RAPID 40’

Program to be used for half load of lightly-soiled dishes with no dried

food residues. Does not have drying phase.

5 HALF LOAD

Ideal for washing a half load of lightly or normally soiled crockery.

Notes:

Please note that cycle Rapid 40’ is dedicated for lightly soiled dishes.

Produktspezifikationen

Marke:	Indesit
Kategorie:	Spülmaschine
Modell:	Slimline DI9E 2B10 UK
Breite:	448 mm
Tiefe:	555 mm
Gewicht:	27200 g
Steuerung:	Tasten
Höhe:	820 mm
AC Eingangsspannung:	220-240 V
AC Eingangsfrequenz:	50 Hz
Eingebautes Display:	Nein
Verpackungsbreite:	500 mm
Verpackungstiefe:	675 mm
Verpackungshöhe:	890 mm
Paketgewicht:	29000 g
Ursprungsland:	Polen
Anzahl der Temperatureinstellungen:	3
Geräteplatzierung:	Voll integriert
Energieeffizienzklasse:	F
Kabellänge:	1.3 m
Startzeitvorwahl:	Nein
Anschlusswert:	1900 W
Stromstärke:	13 A
Zykluszeit:	240 min
Geräuschpegel:	51 dB
Halbe Beladung:	Nein
Trocknungssystem:	Statisch
Kindersicherung:	Nein
Wasserverbrauch pro Zyklus:	11.5 l
Anzahl Waschprogramme:	5
Innenbeleuchtung:	Nein
Energieverbrauch pro 100 Zyklen:	78 kWh
Energieverbrauch pro Zyklus:	0.78 kWh
Lärmemissionsklasse:	D
Anzahl Maßgedecke:	9 Maßgedecke
Geschirrspülprogramme:	Eco 50°C, Intensive 65°C, Mixed, Quick 45°C
Extratrocken:	Nein
Beladungssensor:	Nein
Temperatur (max):	70 °C
Produktgröße:	Single (45 cm breit)
Bedienfeld Farbe:	Weiß
Oberer Korb höhenverstellbar:	Ja
Art des Besteckeinsatzes:	Korb
Restzeitanzeige:	Nein
Anzeige bei geringem Füllstand an Salz:	Nein
Anzeige für fehlenden Klarspüler:	Nein
Eingebauter Wasserenthärter:	Ja
Glasschutz:	Nein
Stromverbrauch (aus):	0.5 W
Wasserkapazität:	kalt
Automatische Programme:	Nein
Boden-Kontrollleuchte:	Nein
Zolltarifnummer (TARIC):	84221100
Wannenmaterial:	Edelstahl
Zykluszeit (Schnellwaschprogramm):	40 min
Überlaufschutz:	Ja
Automatische Türöffnung:	Nein
Maximale Versorgungstemperatur für Warmwasser:	60 °C
Leistungsaufnahme (eingeschaltet):	5 W
Anzahl der Körbe:	2 Korb/Körbe
Dauer des eingeschalteten Modus:	12 min
Exportkontroll-Klassifizierungsnummer (ECCN):	84221100