Indesit IDL 600 Bedienungsanleitung

Indesit Spülmaschine IDL 600

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Indesit IDL 600 (80 Seiten) in der Kategorie Spülmaschine. Dieser Bedienungsanleitung war für 204 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/80

DISHWASHER

English, 1

Instruction booklet

IDL 550

IDL 600

Contents

Installation, 2-3

Positioning and levelling

Connecting the water and electricity supplies

Technical data

Description of the appliance, 4

Overall view

Control panel

Loading the racks, 5

Lower rack

Cutlery basket

Upper rack

Start-up and use, 6

Starting the dishwasher

Loading the detergent

Washing options

Wash cycles, 7

Wash cycle table

Rinse aid and refined salt, 8

Loading the rinse aid

Loading the refined salt

Care and maintenance, 9

Shutting off the water and electricity supplies

Cleaning the dishwasher

Preventing unpleasant odours

Cleaning the sprayer arms

Cleaning the filters

Leaving the machine unused for extended periods

Precautions and advice, 10

General safety

Disposal

Saving energy and respecting the environment

Troubleshooting, 11

Français, 12

Espanol, 34 Portuges, 45

Dutch, 23

Polski, 56

ÅëëçíéêÜ, 68

 Keep this instruction manual in a safe place for future

reference. If the appliance is sold, given away or

moved, please ensure the manual is kept with the

machine, so that the new owner may benefit from the

advice contained within it.

 Please read this instruction manual carefully: it

contains important information regarding the safe

installation, use and maintenance of the appliance.

 If the appliance must be moved at any time, keep it

in an upright position; if absolutely necessary, it may

be tilted onto its back.

Positioning and levelling

1. Remove the appliance from all packaging and

check that it has not been damaged during

transportation.

If it has been damaged, contact the retailer and do not

proceed any further with the installation process.

2. Check the dishwasher by placing it so that its sides

or back panel are in contact with the adjacent

cabinets or even with the wall. This appliance can also

be recessed under a single worktop (

see the

Assembly instruction sheet

3. Position the dishwasher on a level and sturdy floor. If

the floor is uneven, the front feet of the appliance may

be adjusted until it reaches a horizontal position (the

angle of inclination must not exceed 2 degrees). If the

appliance is levelled correctly, it will be more stable and

much less likely to move or cause vibrations and noise

while it is operating.

Connecting the water and electricity

supplies

 Connection to the water and electricity supplies

should only be performed by a qualified technician.

 The dishwasher should not stand on top of the water

hoses or the electricity supply cable.

The water inlet (A) and outlet (B) hoses and the

electricity supply cable may be positioned towards the

right or the left in order to achieve the best possible

installation (

see figure

Connecting the water inlet hose

• To a suitable cold water connection point: before

attaching the hose, run the water until it is perfectly

clear so that any impurities that may be present in

the water do not clog the appliance; after

performing this operation, screw the inlet hose

tightly onto a tap with a ¾ gas threaded

connection.

• To a suitable hot water connection point: your

dishwasher may be provided with hot water from

the mains supply (if you have a central heating

system with radiators) provided that it does not

exceed a temperature of 60°C.

Screw the hose to the tap as described for

connection to a cold water supply.

 If the inlet hose is not long enough, contact a

specialist store or an authorised technician (

see

Assistance

 The water pressure must be within the values

indicated in the Technical data table (

see below

 The hose should not be bent or compressed.

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the

water supply in the event of anomalies or leaks from

inside the appliance.

- is provided with a

Water Stop

* safety device, in other

words it has a water inlet hose that consists of a

transparent hose on the outside and a red hose on the

inside: both the hoses can withstand extremely high

pressure. If the internal hose breaks, the external hose

becomes a bright red colour and carries the water

instead, thus avoiding any leakage.

 It is very important to check the external hose

regularly: if it is a bright red colour, it must be replaced

by an authorised technician as soon as possible (

see

Assistance

* Only available in selected models.

148

12083

121168

100

Installation

Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain

duct with a minimum diameter of 4 cm. Alternatively,

rest it over a sink or tub; the free end of the hose

should not remain immersed in water.

The special plastic

elbow* makes it easier

to find the best layout:

fix the elbow to the wall

securely in order to

prevent the outlet hose

from moving and spilling

the dirty water.

The part of the hose

marked with the letter A

should be between 40

and 100 cm above the ground (

see figure

 We advise against the use of hose extensions.

Electrical connection

Before inserting the plug into the electrical socket,

make sure that:

• the socket is earthed and complies with current

regulations;

• the socket can withstand the maximum load of the

appliance, which is indicated on the data plate

located on the inside of the door (

see Description

of the appliance

);

• the power supply voltage falls within the values

indicated on the data plate on the inside of the

door;

• the socket is compatible with the plug of the

appliance. If this is not the case, ask an authorised

technician to replace the plug (

see Assistance

); do

not use extension cables or multiple sockets.

 Once the appliance has been installed, the power

supply cable and the electrical socket should be

easily accessible.

 The cable should not be bent or compressed.

 The cable should be checked regularly and replaced

by authorised technicians only (

see Assistance

 The Company shall not be held responsible for any

incidents that occur if these regulations are not

observed.

Advice regarding the first wash cycle

After the appliance has been installed, immediately

before running the first wash cycle, completely fill the

salt dispenser with water and add approximately 2 kg

of salt (

see Rinse aid and refined salt

). The water may

overflow: this is normal and is not a cause for concern.

It is also normal that the LOW SALT* indicator light

continues to flash for a few cycles after the salt has

been loaded.

* Only available in selected models.

Dimensions

width 60 cm

height 85 cm

depth 60 cm

Capacity 12 standard place-settings

Water supply

pressure

30 Kpa ÷ 1Mpa (0.3 ÷ 10 bar)

4.3 psi – 145 psi

Power supply

voltage See appliance data plate

Total absorbed

power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to

the following European

Community Directives:

-73/23/EEC dated 19/02/73

(Low Voltage) and subsequent

modifications

-89/336/EEC dated 03/05/89

(Electromagnetic Compatibility)

and subsequent modifications

-97/17/EC (Labelling)

-2002/96/ CE Waste

Electrical and Electronic

Equipment (WEEE)

Technical data

Produktspezifikationen

Marke:	Indesit
Kategorie:	Spülmaschine
Modell:	IDL 600
Breite:	600 mm
Tiefe:	600 mm
Steuerung:	Buttons, Rotary
Höhe:	850 mm
Anzahl der Temperatureinstellungen:	4
Geräteplatzierung:	Freistehend
Startzeitvorwahl:	Ja
Energieeffizienzklasse (alt):	A
Jährlicher Energieverbrauch:	231 kWh
Trocknungsklasse:	A
Geräuschpegel:	53 dB
Türfarbe:	Weiß
Einschalteverzögerung (max.):	12 h
Wasserverbrauch pro Zyklus:	18 l
Waschwirkungsklasse:	A
Anzahl Waschprogramme:	6
Energieverbrauch pro Zyklus:	1.05 kWh
Anzahl Maßgedecke:	12 Maßgedecke
Geschirrspülprogramme:	Eco, Intensive, Quick
Temperatur (max):	70 °C
Bedienfeld Farbe:	Weiß