Ikan SLD-31 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ikan SLD-31 (11 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
What’s Included
QUICKSTART GUIDE
1 x Carbon Fiber Slider
1 x Padded Carry Bag
4 x Adjustable Rubber Feet
SLD-31
31" Carbon Fiber Camera Slider
support@ikancorp.com © 2015 ikan Corporation. All rights Reserved
www.ikancorp.com 713.272.8822
CHECKED BY
Getting Started
Slider Start-Up:
You can utilize the built-in adjustable legs or mount it to one tripod (using the sliders lower mounting plate). Also, you
may utilize two tripods or heavy duty stands on both end plates using the 1/4"-20 or 3/8"-16 mounting points.
Slider Center Mount
A 3/8"-16 thread in the center of the camera platform is provided to mount ball-level heads, fluid heads, and quick
release plates, making camera mounting and removal easy. Any flat mount 3/8"-16 threaded fluid head will mount to
the slider without tools. Mount your camera to the provided plate with these products.
Level & Shoot:
When shooting, find a stable platform or use tripods and stands to level your slider. Use the slider carriage brake to
lock the movement while leveling the slider. The legs have rosettes to adjust to angles. Use the provided bubble level
to see when the slider is level. Note: Always lock your slider when not operating or near the camera to ensure safe
movement on the slider.
You may operate the slider from the base (preferred) or by pushing the camera or head down the tracks. Using just
fingertips to gently push the slider will help feather the movement from start to stop. The finesse you put into the
slider movement will show in your shots.
Caring for your Slider:
The sealed bearings in the slider are maintenance-free, however, if you get dirt or sand in moving components you
may clean with a moist cloth, blow out with air and lightly oil only the bearing races with graphite or multi-purpose oil.
And never feed after midnight!
Monitor Accessory
Mounting Points
Baseplate
3/8 -16 Thread"
3/8 -16 "
Mounting Points
Integrated
Bubble Level
Friction
Lock Knob
Adjustable
Rubber Feet
Adjustable
Leg Angles
Specifications
Optional Accessories
Some other products that work well with the SLD-31 available from Ikan include:
IK-RSR3
IK-RSR6
IK-RSRS
100BF
75BF
GH03F
3" Camera Riser
6" Hi-Hat Riser
6" Camera Riser Hi-Hat w/ Swivel
100mm Ball to Flat Adapter
75mm Ball to Flat Adapter
Flat Base Pro Fluid Head 11 lbs Max
Specifications
Height
Length
Width
Net Weight
Gross Weight
Packaging Dimensions
Supported Camera Weight
Travel Length
Mounting Point
Carriage Lock
Construction
Shipping Dimensions
Shipping Weight
1.9 In. / 5 cm
31 In. / 80 cm
7.8 In. / 20 cm
1.5 lbs / 600 gm
5 lbs
36 x 8 x 5.25 In.
18 lbs / 8 kg
26 In. / 66 cm
3/8"-16 Mounting Point
Friction Lock Knob
Carbon Fiber, Machined Aluminum, Rubber Feet
36 x 8 x 5.25 In / 914 x 203 x 133 mm
5 lbs / 2.2 kg


Produktspezifikationen

Marke: Ikan
Kategorie: Nicht kategorisiert
Modell: SLD-31

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ikan SLD-31 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ikan

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-