Icom DS-100 Bedienungsanleitung

Icom Marine DS-100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Icom DS-100 (36 Seiten) in der Kategorie Marine. Dieser Bedienungsanleitung war fĂŒr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
offered by Busse-Yachtshop.com
DS-100
DSC CONTROLLER
(#02)
INSTRUCTION MANUAL
DS-100#02-(2) 01.12.13 10:53 AM Page 33 (1,1)
offered by Busse-Yachtshop.com
i
FOREWORD
Thank you for purchasing this Icom product. The DS-100 (#02)
DSC CONTROLLER
is designed and built with Icom’s superior
technology and craftsmanship. With proper care this product
should provide you with years of trouble-free operation.
IMPORTANT
READ ALL INSTRUCTIONS carefully and com-
pletely before using the controller.
SAVE THIS INSTRUCTION MANUAL—This in-
struction manual contains important operating instructions for
the DS-100.
EXPLICIT DEFINITIONS
FEATURES
☞Class D DSC terminal
The DS-100 (#02)
VHF DSC CONTROLLER
is designed as
a ‘Class D DSC terminal unit’ for the IC-M401EURO or
IC-M503
VHF MARINE TRANSCEIVERS
.
DS-100 (#02) is not compatible with DS-100 (#01). The
plug of the control cable is a different type.
☞Self ID indication
THE MMSI NUMBER SHOULD BE PROGRAMMED BY
A DEALER PRIOR TO INSTALLATION.
The DS-100 (#02) does not function when there is no ID
programmed. Therefore, the ID code should be checked
in the Set-up menu.
WORD DEFINITION
RWARNING Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE If disregarded, inconvenience only. No risk
of personal injury, ïŹre or electric shock.
Icom, Icom Inc. and the logo are registered trademarks of
Icom Incorporated (Japan) in the United states, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
DS-100#02-(2) 01.12.13 10:53 AM Page ii (1,1)
offered by Busse-Yachtshop.com
ii
CE Versions of the DS-100 which display the “CE”
symbol on the serial number seal, comply with the
essential requirements of the European Radio and
Telecommunication Terminal Directive 1999/5/EC.
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands and/or
may be subject to licensing conditions in the country
of use. Be sure to check that you have the correct
version of this radio, or the correct programming for
this radio, to comply with national licensing require-
ments.
RWARNING! NEVER connect the controller to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
RWARNING NEVER transmit a distress call when
your vessel does not need immediate help. Distress calls can
be used only in times of emergency.
NEVER connect the controller to a power source of more
than 16 V DC. Such a connection will ruin the controller.
NEVER place the controller where normal operation of the
ship may be hindered or where it could cause bodily injury.
AVOID using or placing the controller in direct sunlight or in
areas with temperatures below –20°C (–4°F) or above +60°C
(+140°F).
KEEP the controller out of the reach of children.
KEEP the antenna cable and DC power cable as far away
as possible from electrical pumps, generators and other elec-
tronic instruments to prevent instrument malfunctions.
KEEP the controller and microphone at least 1 meter away
from your vessel’s magnetic navigation compass.
DO NOT use chemical agents such as benzene or alcohol
when cleaning, as they can damage the terminal unit sur-
faces.
CAUTIONS
DS-100#02-(2) 01.12.13 10:53 AM Page iii (1,1)


Produktspezifikationen

Marke: Icom
Kategorie: Marine
Modell: DS-100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Icom DS-100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten