Honeywell HPA094 Bedienungsanleitung

Honeywell Luftreiniger HPA094

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell HPA094 (12 Seiten) in der Kategorie Luftreiniger. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE

SAFETY INSTRUCTIONS

BEFORE USING THIS

AIR PURIFIER

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

1. Read all instructions before operating the

air purifier.

2. Place air purifier where it is not easily

knocked over by persons in the household.

3. Always turn the air purifier controls to the

OFF position and unplug from the wall

outlet when not in use.

4. To disconnect the air purifier, make sure

the unit is powered OFF then grip the plug

and pull it from the wall outlet. Never pull

by the cord.

5. Do not use any product with a damaged

cord or plug or if product malfunctions, is

dropped or damaged in any manner. Keep

the cord away from heated surfaces.

6. Do not use air purifier outdoors.

7. Never use air purifier unless it is

fully assembled.

8. Do not run power cord under carpets, and

do not cover with throw rugs. Arrange

cord such that it will not be tripped over.

9. Do not use air cleaner where combustible

gases or vapors are present.

10. Do not expose the air purifier to rain, or

use near water, in a bathroom, laundry

area or other damp location.

11. The air purifier must be used in its upright

position.

12. Do not allow foreign objects to enter

ventilation or exhaust opening as this may

cause electric shock or damage to the air

purifier. Do not block air outlets or intakes.

13. Locate air purifier near the outlet and

avoid using an extension cord.

14. This appliance has a polarized plug (one

blade is wider than the other). To reduce

the risk of shock, this plug is intended to

fit only one way in a polarized outlet. If the

plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a

qualified electrician.

DO NOT attempt to defeat this safety

feature.

15. A loose fit between the AC outlet

(receptacle) and plug may cause

overheating and a distortion of the plug.

Contact a qualified electrician to replace

loose or worn outlet.

16. Do not sit, stand or place heavy objects on

the air purifier.

17. Disconnect power supply before servicing.

18. SAVE THESE INSTRUCTIONS.

WARNING: To Reduce The Risk of Fire or

Electric Shock, Do Not Use This Air Purifier

With Any Solid-State Speed Control Device.

THE DOCTOR’S CHOICE

TRUE HEPA

ALLERGEN REMOVER

AIR PURIFIERS

For Models: HPA090 series, HPA100 series,

HPA200 series & HPA300 series

The Honeywell Trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.

Honeywell International Inc. makes no representation or warranties with respect to this product.

2 3

HPA100 series, HPA200 series, HPA300 series

Type

Odor Reducing Pre-Filter

Household Gas

& Odor Reducing Pre-Filter

Front Grille

YOUR AIR PURIFIER

SET-UP

• Select a firm, level and flat location.

• When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be

cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminates. This may

also help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug

should be used underneath to prevent permanent staining. This is especially important in homes with

contamination from smoking, fireplaces, or where candles are burned.

• Ensure the front of the unit faces away from the closest wall or furniture.

• Ensure no grilles are blocked.

Control Panel

HPA090 series

Type R

True HEPA

Filter (1)

Type

Odor Reducing

Pre-Filter or

Household Gas &

Odor Reducing Pre-Filter

Front Grille

The True HEPA Filters and Odor Reducing Pre-Filter are supplied within the air purifier. New air purifiers

have their filters wrapped to ensure purity, and are labeled to help identify the proper replacement filter.

(Type

True HEPA Filter; Type

Odor Reducing Pre-Filter or

Household Gas & Odor Reducing Pre-Filter)

• Before using your new air purifier you must remove the wrappers covering the filters and Pre-Filter.

Make sure the air purifier is OFF and unplugged. Press the two hand symbols () on the front grille to

release it from the unit and pull the grille toward you to remove it (see Fig. 2). Grasp the sides of the

filter frame near its top end and pull outward. Repeat for the second and third

filter if applicable.

• Remove protective wrap from the filters (including the Pre-Filter) that have

been supplied with your air purifier.

• Place the HEPA filter(s) into the air purifier housing. Ensure that the removal

“pull” tabs are facing outward (this will facilitate filter removal later). Place the

Pre-Filter on top of the HEPA filter(s). Tuck the edges of the Pre-Filter into the

tabs that are located around the edges of where the HEPA filter(s) are inserted.

This will hold the Pre-Filter securely in place.

• Replace the front grille by placing the tabs on the bottom of the grille into the

slot(s) on the unit. Gently push the top of the grille into place by pressing on the hand symbols () to

secure in place.

Control Panel

Type R

True HEPA Filters

HPA100 HPA300HPA200

HOW YOUR AIR PURIFIER WORKS

This model air purifier incorporates a 2-stage cleaning

system to help clean the air that passes through the

filter in the unit (Fig. 1).

Stage 1: Odor Reducing Pre-Filter

Stage 2: True HEPA Filter that captures

particles as small as 0.3 microns or larger

Filter(s)

Odor Reducing

Pre-Filter

STAGE 1 STAGE 2

Fig. 1

SET-UP

INSTALL TRUE HEPA FILTERS AND ODOR REDUCING PRE-FILTER

Fig. 2

4 5

This product earned the ENERGY STAR rating by meeting strict energy efficiency guidelines set by

the U.S. EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from

the use of this product.

Portable air purifiers are more effective in rooms where all doors and windows are closed. In general, it is

recommended that you run your air purifier while you are at home to clean the air.

HPA090 Series Operation:

• Once the filters have been unwrapped and replaced in the unit, ensure the

air purifier’s control knob is turned to the OFF position and plug the power

cord into a working electrical outlet.

• Select the desired cleaning level by turning the knob to General Clean,

Allergen or Turbo setting (Fig. 3).

• The Turbo setting will operate the air purifier at the highest speed. This

setting will maximize the unit’s ability to help reduce odors and will help clean the air quickly if you have

a specific air quality issue that needs to be addressed.

• The Allergen setting will effectively help reduce airborne allergen from the air that passes through the filter.

HPA100, 200, 300 Series Operation:

• Once the filters have been unwrapped and

replaced in the unit, plug the power cord into a

working electrical outlet.

• Select the desired cleaning level by simply

TAPPING the power symbol ( ) to toggle through

the setting options. A blue LED light will illuminate the selected setting: Germ, General Clean or Allergen.

TAP POWER ( ) for on/off & cleaning level selection.

ALLERGEN optimizes allergen capturing performance during allergen season.

GENERAL CLEAN for general, everyday air cleaning.

GERM optimizes germ capturing performance. Use during cold & flu season.

TAP TURBO () for power cleaning or fast odor reduction.

• The Turbo setting operates the unit at the highest speed. This setting will maximize the unit’s ability to

help reduce odors and will help clean the air quickly. To select the Turbo setting the unit must already

be running at one of the 3 cleaning settings, TAP the Turbo icon ( ). The Turbo LED will illuminate.

TAPPING the Turbo icon ( ) again will return the air purifier to the previous cleaning setting. To shut

OFF, tap the Power symbol ( ) until the air purifier shuts off.

Using the Timer Option (Not available on the HPA090 Series):

The Timer Option ( ) allows you to select how long the air purifier will run before

it automatically shuts off. There are three pre-set run times: 2, 4, and 8 hours. Do

not use this option if you want the unit to run continuously.

• To set the unit for Automatic Shut Off, TAP the Auto-off Timer icon ( ).

• Continue to TAP to toggle through to the desired time setting.

• An LED light will illuminate to indicate the selected run time (Fig. 5).

• The unit will automatically shut off after the indicated run time.

MAINTAINING YOUR STAGE 1 WASHABLE PARTICLE PRE-FILTERREPLACING THE TRUE-HEPA FILTERS

See INSTALLATION INSTRUCTIONS on page 3 of this manual.

You may be able to purchase Honeywell replacement True-HEPA filter

for your air purifier at the store

where you purchased your air purifier or they can be ordered directly from Kaz USA, Inc., the licensee of

Honeywell air purifiers at www.replacementfilters.com. If you have any questions, contact Kaz Consumer

Services at 1-800-477-0457.

Please note that each model series takes a different number of HEPA filters: HPA090 and HPA100 Series use 1 HEPA

Replacement Filter, HPA200 Series use 2 HEPA R

Replacement Filters , HPA300 Series use 3 HEPA R

Filters

These air purifier models each have two electronic filter checks to remind you

when to check and replace the True-HEPA filters and the Odor Reducing Pre-

Filters based on the air cleaner’s hours of use.

When the True HEPA filter(s) and/or the Pre-Filter need to be replaced, the

“Check Filter” or “Check Pre-Filter” light will illuminate (Fig. 7).

You should periodically check these filters. Depending on operating conditions,

the True-HEPA filters should be replaced every 12 months, and the Odor

Reducing Pre-Filters every 3 months, especially if there have been heavy odors

and particles in the home.

To RESET Either Electronic Filter Check:

After you have replaced the appropriate filter(s) the “Check Filter or “Check Pre-Filter” light will remain

on until it is reset. With the unit powered on, press the lighted button and hold for approximately 2

seconds until the light turns off. The electronic filter check is now reset. Depending on individual usage

(environment and hours used), you may need to replace filters more or less frequently.

NOTE: If you change the Pre-Filter or Filter before the Electronic Filter Check lights are illuminated, it is

possible to re-set the light indicators. With the unit plugged in, but NOT powered on, press and hold each

button individually for at least 5 seconds. This will illuminate the indicator light. After the light turns on,

individually press and hold the “Check Filter” or “Check Pre-Filter” button until each light goes off. At this

point, the filter indicator will be re-set to it’s original “clean” status.

These cleaning intervals are intended as guidelines only. Performance of any filter media is dependent

upon the concentration of contaminates going through the system. High concentrations of contaminates

such as dust, pet dander and smoking will reduce the useful performance of the filter.

NOTE: None of the filters are washable. Do not immerse them in water.

ELECTRONIC FILTER CHANGE REMINDER

Fig. 7 Will illuminate

when it is time to

change HEPA filters

OPERATION

Fig. 5 Timer Function

Using the Dimmer Option (Not available on the HPA090 Series)

The Dimmer Option ( ) allows you to adjust the brightness of the LED displays on

the control panel (Fig. 8). You may wish to adjust the brightness depending on the

room where the unit is placed. The unit always turns on with the brightness on HIGH.

To adjust brightness:

• TAP the Dimmer icon ( ) once to dim the lights to LOW.

• TAP the Dimmer icon ( ) twice and it will shut the lights OFF. (the air purifier

will not shut off).

• TAPPING the Dimmer icon ( ) a third time will return the brightness to HIGH.

Fig. 6 Dimmer Function

Fig. 3 HPA090 Control Panel

Fig. 4 HPA100, HPA200, HPA300 Control Panel

Produktspezifikationen

Marke:	Honeywell
Kategorie:	Luftreiniger
Modell:	HPA094

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell HPA094 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Luftreiniger Honeywell

Honeywell F116A1120 Bedienungsanleitung

28 August 2024

Honeywell F120 Bedienungsanleitung

28 August 2024

Honeywell F118 Bedienungsanleitung

28 August 2024

Honeywell HPA5200 Bedienungsanleitung

27 August 2024

Honeywell HPA5100 Bedienungsanleitung

27 August 2024

Honeywell HPA-245 Bedienungsanleitung

27 August 2024

Honeywell HHT-080 Bedienungsanleitung

27 August 2024

Honeywell HPA180 Bedienungsanleitung

27 August 2024

Honeywell QuietClean HFD230 Bedienungsanleitung

27 August 2024

Honeywell HHT-081 Bedienungsanleitung

27 August 2024

Bedienungsanleitung Luftreiniger

Neueste Bedienungsanleitung für -Kategorien-

Trotec TAC 5000 Bedienungsanleitung

16 Oktober 2024

Duux DXPU07 Bright Bedienungsanleitung

16 Oktober 2024

Taurus AP2030 Bedienungsanleitung

16 Oktober 2024

TruSense Z-2000 Bedienungsanleitung

16 Oktober 2024

Ulsonix AIRCLEAN 20G Bedienungsanleitung

16 Oktober 2024

Philips AC5602 Bedienungsanleitung

15 Oktober 2024

Winix AUS-5500 Bedienungsanleitung

14 Oktober 2024

Homedics AR-35 Bedienungsanleitung

14 Oktober 2024

Vax AP02 Bedienungsanleitung

10 Oktober 2024

Whynter AFR-300 Bedienungsanleitung

10 Oktober 2024